Home

href="
F61 Series  
Wall Plate Assembly  
INSTALLATION INSTRUCTIONS  
Operator: Save these instructions for future use!  
FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY  
BEFORE INSTALLING OR OPERATING THIS CONTROL COULD CAUSE  
PERSONAL INJURY AND/OR PROPERTY DAMAGE.  
DESCRIPTION  
This wall plate assembly is designed for mounting a 70  
Series vertical thermostat to the wall or to a junction box.  
Thewallcoverplatecoversthejunctionbox,walldamage,  
or old thermostat markings.  
PRECAUTIONS  
CAUTION  
NOTE  
!
To prevent electrical shock and/or equip-  
ment damage, disconnect electrical power  
at main fuse or circuit breaker until installa-  
tion is complete.  
This instruction sheet is not intended as a wiring guide.  
Refer to the thermostat installation instructions to ensure  
proper wiring.  
INSTALLATION  
NOTE  
When installing wall cover plate and  
thermostat directly to wall, use the  
pointed screws supplied  
3
6-32 X  
/ ” flat-head  
4
with the thermostat.  
machine screws  
Junction Box  
No. 6 X 1pan-head screws  
(supplied with thermostat)  
F61-2593 Wall Plate  
Wall  
Subbase  
F0004-1748  
F61-2593 Wall Plate  
1E7X  
Thermostat  
Subbase  
F0004-1748  
Figure 1. Mounting 1F7X vertical digital  
thermostat to vertical junction box.  
1E7X  
Thermostat  
Figure 2. Mounting 1E7X vertical  
digital thermostat to wall.  
White-Rodgers is a division  
of Emerson Electric Co.  
PARTNO.37-6598A  
0523