Honeywell T7516A Thermostat User Manual

Home

href="
T7516A,B,C  
Energy Management System  
USER’S GUIDE  
Weekday/Weekend 7-day Programmable  
Heat and/or Cool Conventional  
and Heat Pump  
69-1611  
Welcome to the world of comfort and energy savings with your new Honeywell T7516A,B,C Energy  
Management Thermostat brought to you by your energy utility. This thermostat allows up to seven  
separate days of programming. You can set the thermostat to control the temperature in your  
home, your water heater, and another appliance (such as a swimming pool pump) according to  
your personal schedule and preferences. This thermostat keeps you comfortable, and saves you  
energy.  
Besides being programmable, this thermostat contains a communications module that allows your  
energy utility to communicate with your thermostat so you can take advantage of Residential  
Service Variable Price (RSVP) Rate.  
Residential Service Variable Price (RSVP) Rate. The T7516A,B,C Energy Management Thermo-  
stat informs you of the energy price in effect at any given time (see Fig. 1). A special feature of this  
thermostat allows you to program it to automatically adjust your energy use for each price. These  
prices are: Low (least expensive), Medium, High, and Critical (most expensive). The thermostat  
also provides you with the ability to operate your electric water heater and another appliance based  
on the price in effect.  
2
69-1611  
href="
AM  
INDICATOR FOR RSVP CURRENT PRICE  
M12661A  
Fig. 1. RSVP Rate indications.  
3
69-1611  
Table of Contents  
Getting to Know Your Thermostat ............................................................................................  
Standard Display .....................................................................................................................  
Keypad ....................................................................................................................................  
Battery Compartment ..............................................................................................................  
Replacing Thermostat Batteries .........................................................................................  
6
6
8
8
8
Indicator Light.......................................................................................................................... 10  
Programming Overview........................................................................................................... 10  
User Operations ...................................................................................................................... 10  
Present Setting ................................................................................................................... 10  
Overrides ............................................................................................................................ 12  
Hold ............................................................................................................................... 12  
Temporary...................................................................................................................... 13  
Recovery From Setback ..................................................................................................... 14  
Programming Your Thermostat ................................................................................................ 15  
Price Response ....................................................................................................................... 17  
Entering Schedule Programming ............................................................................................ 18  
Inputting Basic Program ..................................................................................................... 19  
Changing Parts of the Program .......................................................................................... 39  
4
69-1611  
Programming Price Response .................................................................................................. 48  
Overview ................................................................................................................................. 48  
Entering Price Response Programming .................................................................................. 50  
Controlling Heat/Cool System .................................................................................................. 59  
Changing the System Setting .................................................................................................. 59  
Controlling Fan........................................................................................................................... 60  
Troubleshooting ......................................................................................................................... 61  
Personal Programming Charts ................................................................................................. 66  
Customer Assistance ................................................................................................................ 71  
Warranty...................................................................................................................................... 71  
5
69-1611  
href="
Getting to Know Your Thermostat  
Standard Display  
The current room temperature and time are  
always part of the standard display. Other  
displayed data includes heating and air  
conditioning (Heat/Cool) status, day of the  
week, schedule period, water heater and  
appliance status, and the RSVP current price  
The thermostat has a display, a covered 15 key  
keypad, a covered battery compartment, and  
an indicator light on the front panel (see Fig. 2).  
Fig. 2 shows the thermostat, display, and all  
display segments.  
(
see Fig. 2). The thermostat display automati-  
cally sequences several displays (see Fig. 3).  
NOTE: The colon in the time display blinks,  
except when in the programming  
mode.  
AM  
PM  
TM  
Scientific  
Atlanta  
Program  
Device  
Time Temperature  
Water  
On-Off-Clr  
Ahead  
Back  
Warmer  
Cooler  
Day of  
Week  
Appl  
On-Off-Clr  
Time  
Period  
Present  
Setting  
Fan  
Auto-On  
Hold  
Price  
Response  
Heat  
Cool  
Clear  
INDICATOR LIGHT  
M15533  
Fig. 2. T7516 Energy Management  
Thermostat.  
6
69-1611  
href="
1
STANDARD  
AM  
2
HOLD  
A SERIES OF SCREENS THAT PROVIDE  
THE PHONE NUMBER TO CALL TO  
CONTACT YOUR ENERGY UTILITY.  
TEMPORARY  
BATTERY LOW INDICATION  
1
THIS SCREEN IS ALWAYS PART OF THE DISPLAY SEQUENCE.  
2
ONLY APPEARS: WHEN YOUR ENERGY UTILITY SIGNALS IT TO DO SO; DURING A LOSS OF COMMUNICATION,  
OR A THERMOSTAT FAULT.  
M20426  
Fig. 3. Display sequence.  
7
69-1611  
Replacing Thermostat Batteries  
IMPORTANT  
Keypad  
Lift the front cover to see the keypad. From the  
keypad, you can operate and program the  
thermostat. To operate the thermostat, press  
and release the keys.  
Install batteries to maintain the time in  
the event of a power loss. Although  
the thermostat has a low battery  
indicator, replace the batteries once  
every two years to prevent the  
thermostat from losing the time during  
a momentary power loss.  
NOTE: The thermostat registers all program-  
ming inputs immediately and main-  
tains them until manually changed.  
Low batteries or power outages do  
not delete thermostat programming.  
NOTE: If the time is ever incorrect, you can  
not change it. Your energy utility  
periodically updates the clock to the  
correct time.  
Battery Compartment  
The battery compartment under the left side of  
the front panel contains two AA batteries that  
keep the clock running during a power interrup-  
tion.  
8
69-1611  
href="
As the batteries run low, the thermostat display  
sequence includes an indication of this. The  
low battery indication appears one to two  
months before the batteries run out completely.  
Replace the batteries as soon as possible after  
the indication appears.  
You need two AA alkaline batteries (not  
supplied); non-alkaline batteries do not last as  
long, and can leak, damaging the thermostat or  
wall surface. To replace the batteries:  
REMOVING  
BATTERY  
DOOR  
1. Use a coin to carefully remove the  
battery door (see Fig. 4).  
M1719C  
2. Follow the directions on the label  
revealed by removal of the battery door.  
Fig. 4. Battery Door Removal.  
9
69-1611  
href="
When the light is off, the emergency heat (or  
auxiliary heat) is off.  
When the light is on, the emergency heat  
Indicator Light  
This light indicates primarily the emergency  
heat (or auxiliary heat). It also indicates  
whether Critical Time-of-Use Pricing is in effect,  
or is scheduled (see Table 1).  
(or auxiliary heat) is on.  
Table 1. Critical RSVP Price Indications.  
Auxiliary (or  
Emergency) Heat  
Indicator Light  
Critical RSVP Price  
Off  
Flashes three times, then pauses.  
Flashes once, then pauses.  
Flashes twice, then remains on.  
Periodically turns off once.  
In effect.  
Scheduled to start within 30 min.  
In effect.  
1
On  
Scheduled to start within 30 min.  
1
Heat pump thermostats only.  
1
0
69-1611  
href="
Programming Overview  
Complete the Personal Programming Charts  
User Operations  
Present Setting  
Press and release the Present Setting key to  
return to standard display from any other  
display. The display first switches to show the  
current settings. After a few seconds the  
thermostat returns to the standard display.  
(Tables 3 through 6) before you program your  
thermostat.  
You can program the thermostat with separate  
schedules for heat, cool, electric water heater,  
and one appliance (such as a pool pump).  
Each device schedule is for seven separate  
days and up to four periods. For convenience,  
you can program the seven days individually,  
or simultaneously in any one of the following  
groupings: Monday through Sunday, Monday  
through Friday, or Saturday and Sunday. The  
four periods are: Morning (MORN), Day (DAY),  
Evening (EVE), and Night (NIGHT).  
NOTE: If the heating and cooling are both off,  
the display will show Set - -.  
CAUTION  
Equipment Damage Hazard.  
Use of sharp fingernails or pencil  
points can damage the keypad  
beyond repair.  
Use the ball of your finger or a soft  
pencil eraser when pressing the keys.  
1
1
69-1611  
href="
Overrides  
Hold  
An override is a setting used to manually  
change the setting without affecting the  
program memory.  
A hold is a setting used to override the program  
for an extended period of time. A hold main-  
tains a setting until manually changed.  
From the standard display, press the Clear key  
to clear any temperature override in effect.  
The hold display indicates all items currently  
set on hold.  
M15508  
M15505  
Press and release the Hold key to get to the  
hold display. Modifying any item being perma-  
nently held (with Warmer, Cooler, Water, and  
Appl keys) also brings up the hold display.  
Press Warmer or Cooler keys with hold  
To clear Water or Appliance overrides, press  
the Water or Appl key until the display shows  
neither On nor Off underneath Water or Appl.  
Water  
Appl  
On-Off-Clr  
or  
On-Off-Clr  
displayed to increase or decrease the setpoint.  
M15470  
M15471  
1
2
69-1611  
href="
Press Water or Appl keys to toggle the hold  
status.  
RSVP Price changes to Critical, or the thermo-  
stat enters the next scheduled period.  
Water switches between: no hold and hold  
off.  
Appl cycles through: no hold, hold on, hold  
The temporary display indicates the items set  
on temporary.  
off, and back to no hold.  
NOTES:  
Only items being held appear on the  
display.  
Water cannot be permanently held on,  
but it can be permanently held off.  
With no temperature displayed, no  
hold exists.  
M15506  
From the standard display, press the Warmer  
or Cooler key to get to the temporary display.  
Use these keys to increase or decrease the  
room temperature setting.  
Temporary  
A temporary is a setting used to override the  
program for a brief period of time. Temporary  
settings maintain a setting until either the  
1
3
69-1611  
href="
Press Water or Appl keys to display the  
temporary display and toggle the water or  
appliance state.  
In spite of period changes, a tempo-  
rary Water override, by default, lasts  
for one hour.  
With no temperature displayed, no  
temporary exists.  
Press the Hold key twice to get to the  
temporary display.  
A temporary ends when the RSVP  
price changes to a rate programmed  
to switch on the Water or Appliance.  
M15509  
NOTES:  
A temporary cannot clear or replace a  
hold.  
With a hold in effect, an attempt to set  
a temporary changes the display to  
the hold display.  
Recovery From Setback  
Recovery is the time when the thermostat  
operates the heating or cooling equipment to  
return the house from the energy savings to  
the temperature you prefer when you are  
present and awake.  
Only items being held appear on the  
display.  
1
4
69-1611  
This thermostat uses a recovery process that  
turns your heating/cooling equipment on or off  
at the time you program the temperature to  
change. For example, if you set the thermostat  
to heat to 72°F at 6:00 AM, the heating  
equipment comes on at 6:00 AM and begins  
warming the house to 72°F. If you want the  
temperature in the house to be 72°F at 6:00  
AM, you must set the thermostat to turn on  
earlier; for example, 5:30. (The amount of time  
required to warm or cool your house to the  
temperature you want depends on many  
factors such as the size of your heating/cooling  
equipment and the outdoor temperature.)  
Programming Your Thermostat  
IMPORTANT  
Press and release the Present Setting  
key to exit programming and return to  
the standard display.  
NOTES:  
Energy prices supplied by your  
energy utility may influence the times  
you choose to schedule periods for  
maximum energy efficiency.  
Each period can occur at any pro-  
grammed time; for example, you can  
set morning at 9 PM. When you  
program the thermostat, be careful to  
use the correct time to avoid confu-  
sion.  
NOTE: If the thermostat is for a heat pump  
system, the thermostat uses a method  
of recovery that helps reduce the use  
of auxiliary heat.  
1
5
69-1611  
MORN is the time you get up. Generally,  
you want the house at a comfortable  
temperature when you wake up. Set the  
MORN time earlier than your alarm clock  
so your home has time to reach the  
desired temperature.  
DAY is the time you leave for work or  
school. Generally, once you leave your  
home, you want the temperature higher  
or lower (depending on the season) so  
that you can save energy while you are  
away.  
EVE is the time you return from work or  
school. Again, you want your home at a  
comfortable temperature when you  
return and go about the normal activities  
of your evening. Set the EVE time earlier  
than the time you arrive so your home  
has time to reach the desired tempera-  
ture before you get there.  
NIGHT is the time you usually go to sleep.  
While you are sleeping, you can save  
energy by setting the thermostat to  
control the temperature higher or lower  
(depending on the season).  
If you choose not to program the thermostat, it  
controls the temperature using the following  
defaults:  
The cooling temperature remains set to a  
constant 78°F.  
At 6:00 AM every day, the thermostat sets  
the heating temperature to 68°F.  
At 10:00 PM every night, the thermostat  
reduces the heating temperature to 60°F  
You do not need to enter a time and tempera-  
1
6
69-1611  
ture program for every period if your schedule  
does not require it; for example, if your home is  
occupied during the day on weekdays, you can  
program only the MORN and NIGHT times.  
As the cost of energy increases, the thermostat  
uses your pre-programmed choices to reduce  
usage by temporarily changing the setpoint;  
that is, it changes the temperature setting—  
increasing it for cooling, decreasing it for  
heating—or turns off the water heater and/or  
appliance.  
NOTE: You cannot set temperatures higher  
than 88°F or lower than 45°F.  
Price Response  
You can also program the thermostat based on  
the current price of electricity. Use Tables 7 and  
NOTE: You can enter the number of degrees  
you want the thermostat to change  
the temperature (offsets) for each  
price except Low. The Low price  
always uses whatever schedule  
programming exists and it is the basis  
for the offsets. The one exception is  
the water heater, which is always  
enabled during the low price.  
8
to plan the Price Response program.  
Price Response programming allows the  
thermostat to respond to changes in the RSVP  
prices. Your energy utility tells the thermostat  
what the current RSVP price is for electricity.  
These prices are: Low (least expensive),  
Medium, High, and Critical (most expensive).  
1
7
69-1611  
href="
NOTE: Before programming the thermostat,  
remove the clear protective plastic  
display overlay.  
CAUTION  
Equipment Damage Hazard.  
Use of sharp fingernails or pencil  
points can damage the keypad  
beyond repair.  
Entering Schedule Programming  
Refer to your Personal Programming Charts  
and proceed as follows:  
Use the ball of your finger or a soft  
pencil eraser when pressing the keys.  
IMPORTANT  
The thermostat registers all program-  
ming inputs immediately and main-  
tains them until manually changed.  
Low batteries or power outages do  
not delete thermostat programming.  
IMPORTANT  
When programming for the appliance,  
make certain that you consider  
potential safety issues; for example:  
with a pool pump during winter  
freezing weather, you will have to  
operate the pool pump as you have  
always done to prevent pump and  
pipe freezing.  
1
8
69-1611  
NOTE: When setting a program time or  
temperature, the instructions direct  
you to “Press and hold until the  
display shows the desired time (or  
temperature).” This changes the  
setting quickly in the selected  
direction. Use this method when the  
change is large (for example, two  
hours, or ten degrees). Once the  
setting is close, press and release the  
key to move the setting one step at a  
time.  
IMPORTANT  
Because this procedure can affect up  
to seven days of programming, be  
careful when making changes with  
multiple days selected.  
NOTES:  
If you delete all programming with the  
CLEAR key, the thermostat uses the  
default program.  
PGM is an indication that you are in  
programming mode.  
Inputting Basic Program  
The most efficient way to program the thermo-  
stat is to first input a basic program for the  
entire week. Then, you can make changes to  
specific days to fit your needs.  
1
9
69-1611  
href="
Step 1: Setting Basic Cooling Times and Temperatures.  
First program the  
MORN time and  
temperature, if  
desired, for the  
entire week.  
Press and release until the  
display shows PGM COOL.  
AM  
AM  
AM  
Device  
M15403  
M15403  
M15403  
Press and release until the  
display shows MON TUE  
WED THU FRI SAT SUN.  
Day of  
Week  
Press and release until the  
display shows MORN.  
Time  
Period  
2
0
69-1611  
href="
Press and hold until the  
display shows the desired  
time.  
AM  
Ahead  
Back  
M15404  
Press and hold until the  
display shows the desired  
temperature.  
AM  
Warmer  
Cooler  
M15405  
2
1
69-1611  
href="
Program the  
Press and release until the  
display shows DAY.  
Time  
Period  
DAY time and  
temperature, if  
desired, for the  
entire week.  
M15406  
Press and hold until the  
display shows the desired  
time.  
AM  
Ahead  
Back  
M15407  
Press and hold until the  
display shows the desired  
temperature.  
AM  
Warmer  
Cooler  
M15408  
2
2
69-1611  
href="
Program the EVE  
time and  
Press and release until the  
display shows EVE.  
Time  
Period  
temperature, if  
desired, for the  
entire week.  
M15409  
Press and hold until the  
display shows the desired  
time.  
Ahead  
Back  
PM  
M15410  
Press and hold until the  
display shows the desired  
temperature.  
Warmer  
Cooler  
PM  
M15411  
2
3
69-1611  
href="
Program the  
Press and release until the  
display shows NIGHT.  
Time  
Period  
NIGHT time and  
temperature, if  
desired, for the  
entire week.  
M15412  
Press and hold until the  
display shows the desired  
time.  
Ahead  
Back  
PM  
M15413  
Press and hold until the  
display shows the desired  
temperature.  
Warmer  
Cooler  
PM  
M15414  
2
4
69-1611  
href="
Step 2: Setting Basic Heating Times and Temperatures.  
First program the  
MORN time and  
temperature, if  
desired, for the  
entire week.  
Press and release until the  
display shows PGM HEAT.  
Device  
M15415  
Press and release until the  
display shows MON TUE  
WED THU FRI SAT SUN.  
Day of  
Week  
M15415  
Press and release until the  
display shows MORN.  
AM  
Time  
Period  
M15416  
2
5
69-1611  
href="
Press and hold until the  
display shows the desired  
time.  
AM  
Ahead  
Back  
M15417  
Press and hold until the  
display shows the desired  
temperature.  
AM  
Warmer  
Cooler  
M15418  
2
6
69-1611  
href="
Program the  
Press and release until the  
display shows DAY.  
Time  
Period  
DAY time and  
temperature, if  
desired, for the  
entire week.  
M15419  
Press and hold until the  
display shows the desired  
time.  
AM  
Ahead  
Back  
M15420  
Press and hold until the  
display shows the desired  
temperature.  
AM  
Warmer  
Cooler  
M15421  
2
7
69-1611  
href="
Program the EVE  
time and  
Press and release until the  
display shows EVE.  
Time  
Period  
temperature, if  
desired, for the  
entire week.  
M15422  
Press and hold until the  
display shows the desired  
time.  
Ahead  
Back  
PM  
M15423  
Press and hold until the  
display shows the desired  
temperature.  
Warmer  
Cooler  
PM  
M15424  
2
8
69-1611  
href="
Program the  
Press and release until the  
display shows NIGHT.  
Time  
Period  
NIGHT time and  
temperature, if  
desired, for the  
entire week.  
PM  
M15425  
Press and hold until the  
display shows the desired  
time.  
Ahead  
Back  
PM  
M15425  
Press and hold until the  
display shows the desired  
temperature.  
Warmer  
Cooler  
PM  
M15426  
2
9
69-1611  
href="
Step 3: Setting Basic Water Times and On/Off Settings.  
First program the  
MORN time and  
on/off setting, if  
desired, for the  
entire week.  
Press and release until the  
display shows PGM  
WATER.  
Device  
PM  
M15427  
Press and release until the  
display shows MON TUE  
WED THU FRI SAT SUN.  
Day of  
Week  
PM  
M15427  
Press and release until the  
display shows MORN.  
AM  
Time  
Period  
M15428  
3
0
69-1611  
href="
Press and hold until the  
display shows the desired  
time.  
AM  
Ahead  
Back  
M15429  
Press and release until the  
display shows the desired  
on/off setting.  
Water  
On-Off-Clr  
AM  
M15429  
3
1
69-1611  
href="
Program the  
Press and release until the  
display shows DAY.  
Time  
Period  
DAY time and  
on/off setting, if  
desired, for the  
entire week.  
M15430  
Press and hold until the  
display shows the desired  
time.  
AM  
Ahead  
Back  
M15431  
Press and hold until the  
display shows the desired  
on/off setting.  
Water  
On-Off-Clr  
AM  
M15431  
3
2
69-1611  
href="
Program the EVE  
time and on/off  
setting, if  
Press and release until the  
display shows EVE.  
Time  
Period  
desired, for the  
entire week.  
M15432  
Press and hold until the  
display shows the desired  
time.  
Ahead  
Back  
PM  
M15433  
Press and hold until the  
display shows the desired  
on/off setting.  
Water  
On-Off-Clr  
PM  
M15433  
3
3
69-1611  
href="
Program the  
Press and release until the  
display shows NIGHT.  
Time  
Period  
NIGHT time and  
on/off setting, if  
desired, for the  
entire week.  
PM  
M15434  
Press and hold until the  
display shows the desired  
time.  
Ahead  
Back  
PM  
M15434  
Press and hold until the  
display shows the desired  
on/off setting.  
Water  
On-Off-Clr  
PM  
M15434  
3
4
69-1611  
href="
Step 4: Setting Basic Appliance Times and On/Off Settings.  
First program the  
MORN time and  
on/off setting, if  
desired, for the  
entire week.  
Press and release until the  
display shows PGM APPL.  
Device  
PM  
M15443  
Press and release until the  
display shows MON TUE  
WED THU FRI SAT SUN.  
Day of  
Week  
PM  
AM  
M15443  
Press and release until the  
display shows MORN.  
Time  
Period  
M15436  
3
5
69-1611  
href="
Press and hold until the  
display shows the desired  
time.  
AM  
Ahead  
Back  
M15437  
Press and hold until the  
On-Off-Clr display shows the desired  
Appl  
AM  
on/off setting.  
M15437  
3
6
69-1611  
href="
Program the  
Press and release until the  
display shows DAY.  
Time  
Period  
DAY time and  
on/off setting, if  
desired, for the  
entire week.  
M15438  
Press and hold until the  
display shows the desired  
time.  
AM  
Ahead  
Back  
M15439  
Press and hold until the  
On-Off-Clr display shows the desired  
Appl  
AM  
on/off setting.  
M15439  
3
7
69-1611  
href="
Program the EVE  
time and on/off  
setting, if  
Press and release until the  
display shows EVE.  
Time  
Period  
desired, for the  
entire week.  
M15440  
Press and hold until the  
display shows the desired  
time.  
Ahead  
Back  
PM  
M15441  
Press and hold until the  
display shows the desired  
on/off setting.  
Appl  
On-Off-Clr  
PM  
M15441  
3
8
69-1611  
href="
Program the  
Press and release until the  
display shows NIGHT.  
Time  
Period  
NIGHT time and  
on/off setting, if  
desired, for the  
entire week.  
M15442  
Press and hold until the  
display shows the desired  
time.  
Ahead  
Back  
PM  
M15443  
Press and hold until the  
On-Off-Clr display shows the desired  
Appl  
PM  
on/off setting.  
M15443  
Changing Parts of the Program  
IMPORTANT  
Because this procedure can affect up  
to seven days of programming, be  
careful when making changes with  
multiple days selected.  
After you input the basic program for the entire  
week, make changes to specific days to tailor  
the program to fit your needs.  
3
9
69-1611  
href="
Step 5: Changing Individual Cooling Times and Temperatures.  
The following example illustrates modifying the Sunday Morning Cooling program.  
First, select  
COOL, and the  
desired day and  
period for the  
change.  
Press and release until the  
display shows PGM COOL.  
Device  
PM  
M15414  
Press and release until the  
display shows the desired  
day(s).  
Day of  
Week  
PM  
AM  
M15445  
Press and release until the  
display shows the desired  
period.  
Time  
Period  
M15444  
4
0
69-1611  
href="
Adjust the time  
that the period  
begins.  
Press and hold until the  
display shows the desired  
time.  
AM  
Ahead  
Back  
M15446  
Press and hold until the  
display shows the desired  
temperature.  
AM  
Warmer  
Cooler  
M15448  
OR  
Delete the  
Press and release.  
Clear  
programming  
from the period  
for the days  
shown on the  
display.  
M15447  
4
1
69-1611  
href="
Step 6: Changing Individual Heating Times and Temperatures.  
The following example illustrates modifying the Saturday Day Heating program.  
First, select  
HEAT, and the  
desired day and  
period for the  
change.  
Press and release until the  
display shows PGM HEAT.  
Device  
PM  
AM  
M15426  
Press and release until the  
display shows the desired  
day(s).  
Day of  
Week  
M15449  
Press and release until the  
display shows the desired  
period.  
AM  
Time  
Period  
M15450  
4
2
69-1611  
href="
Adjust the time  
that the period  
begins.  
Press and hold until the  
display shows the desired  
time.  
Ahead  
Back  
M15451  
Press and hold until the  
display shows the desired  
temperature.  
Warmer  
Cooler  
M15452  
OR  
Delete the  
Press and release.  
Clear  
programming  
from the period  
for the days  
shown on the  
display.  
M15453  
4
3
69-1611  
href="
Step 7: Changing Individual Water Times and On/Off Settings.  
The following example illustrates modifying the Saturday Evening Water program.  
First, select  
Press and release until the  
display shows PGM  
WATER.  
AM  
Device  
WATER, and the  
desired day and  
period for the  
change.  
M15431  
Press and release until the  
display shows the desired  
day(s).  
AM  
Day of  
Week  
M15454  
Press and release until the  
display shows the desired  
period.  
Time  
Period  
PM  
M15455  
4
4
69-1611  
href="
Adjust the time  
that the period  
begins.  
Press and hold until the  
display shows the desired  
time.  
Ahead  
Back  
PM  
M15456  
Press and release until the  
display shows the desired  
on/off setting.  
Water  
On-Off-Clr  
PM  
M15458  
OR  
Delete the  
Press and release. The  
WATER indication shows  
neither on nor off.  
Clear  
programming  
from the period  
for the days  
shown on the  
display.  
M15457  
4
5
69-1611  
href="
Step 8: Changing Individual Appliance Times and On/Off Settings.  
The following example illustrates modifying the Saturday Day Appliance program.  
First, select  
APPL, and the  
desired day and  
period for the  
change.  
Press and release until the  
display shows PGM APPL.  
AM  
Device  
M15436  
Press and release until the  
display shows the desired  
day(s).  
AM  
AM  
Day of  
Week  
M15459  
Press and release until the  
display shows the desired  
period.  
Time  
Period  
M15460  
4
6
69-1611  
href="
Adjust the time  
that the period  
begins:  
Press and hold until the  
display shows the desired  
time.  
AM  
Ahead  
Back  
M15481  
Press and release until the  
On-Off-Clr display shows the desired  
Appl  
AM  
on/off setting.  
M15483  
OR  
Delete the  
Press and release. APPL  
indication shows neither on  
nor off.  
Clear  
programming  
from the period  
for the days  
shown on the  
display:  
M15482  
4
7
69-1611  
NOTE: If you set the period start times so the  
next period begins before the current  
period then the Heat/Cool system  
uses periods out of expected order;  
for example, NIGHT can occur before  
EVE.  
Programming Price Response  
Overview  
Price response allows the thermostat to  
respond to changes in the RSVP prices. Your  
energy utility tells the thermostat what the  
current RSVP price is for electricity. These  
prices are: Low (least expensive), Medium,  
High, and Critical (most expensive). As the cost  
of energy increases, the thermostat reduces  
usage by temporarily changing the setpoint;  
that is, it changes the temperature setting—  
increasing it for cooling, decreasing it for  
heating—or turns off the water heater and/or  
appliance. If you do not enter any price offsets,  
the thermostat uses the default settings (see  
Table 2).  
4
8
69-1611  
href="
Table 2. Price Response Program Defaults.  
Setpoint Offset (°F or °C)  
Price Rate  
Heat  
0
Cool  
0
Hot Water  
Appl  
on  
1
Low  
on  
on  
on  
off  
Medium  
High  
-1  
+1  
+2  
+5  
on  
-2  
on  
Critical  
-5  
off  
1
The Low Price Response settings are fixed and cannot be changed.  
Heat offsets are always negative (less heat to  
save energy). Cool offsets are always positive  
temperature to change from what you pro-  
grammed for normal operation to save money  
at each price. Think of the Price Response  
programming as what you are willing to give up  
to save money when RSVP prices increase.  
(
less cooling to save energy). Hot Water and  
Appliance settings are simply on or off.  
The offset entered is the number of degrees  
you are willing to allow the heating or cooling  
4
9
69-1611  
With an appliance, the APPL indicator lights  
with either an ON or an OFF indication. With  
APPL set to OFF at a particular price, when the  
price reaches that level, the appliance load  
turns off, ignoring the program schedule. The  
water indicator works identically to the appli-  
ance indicator with one exception: when the  
RSVP price is low the water indicator is always  
on.  
If you program an incorrect offset, press and  
release the Clear key. This changes the offset  
on the display to zero. The Clear key works for  
all programmable rates.  
Entering Price Response Programming  
Price Response programming is very similar to  
the other programming. One primary difference  
is that you can program the temperature offsets  
and water/appliance setting changes from the  
same display. The same water and appliance  
setting changes apply for both heating and  
cooling. Therefore, they need only be set once.  
Program them from either the heating or the  
cooling offset display. The following program-  
ming instructions—both heating and cooling—  
detail this process.  
NOTE: Price Response programming does  
not affect temperature, water, or  
appliance holds.  
For example, if you want your home heated to  
7
2° during low rate, but are willing to allow the  
temperature down as low as 70° during high  
rate, your heat offset for rate H (high) is -2  
(72° -2° = 70°). If you do not enter an offset,  
the offset remains as shown in Table 2.  
5
0
69-1611  
href="
Step 1: Setting Price Offsets for Cooling.  
First, program  
the Medium  
offset.  
Press and release until the  
display shows PGM COOL.  
AM  
Device  
M15485  
Press and release the key  
to show OF (indicating  
temperature offset).  
Price  
Response  
M15487  
Press and release until the  
display shows the desired  
Warmer  
Cooler  
(
positive) temperature  
offset.  
M15487  
5
1
69-1611  
href="
Press and release until the  
display shows the desired  
Water on/off setting for the  
Medium offset.  
Water  
On-Off-Clr  
M15487  
Press and release until the  
Appl  
On-Off-Clr display shows the desired  
Appliance on/off setting for  
the Medium offset.  
M15487  
Next, program  
the High offset.  
Press and release the key  
to show OF (indicating  
temperature offset).  
Price  
Response  
M15488  
5
2
69-1611  
href="
Press and release until the  
display shows the desired  
Warmer  
Cooler  
(
positive) temperature  
offset.  
M15489  
Press and release until the  
display shows the desired  
Water on/off setting for the  
High offset.  
Water  
On-Off-Clr  
M15489  
Press and release until the  
Appl  
On-Off-Clr display shows the desired  
Appliance on/off setting for  
the High offset.  
M15490  
5
3
69-1611  
href="
Then, program  
the Critical  
offset.  
Press and release the key  
to show OF (indicating  
temperature offset).  
Price  
Response  
M15491  
Press and release until the  
display shows the desired  
Warmer  
Cooler  
(
positive) temperature  
offset.  
M15493  
Press and release until the  
display shows the desired  
Water on/off setting for the  
Critical offset.  
Water  
On-Off-Clr  
M15493  
Press and release until the  
Appl  
On-Off-Clr display shows the desired  
Appliance on/off setting for  
the Critical offset.  
M15493  
5
4
69-1611  
href="
Step 2: Setting Price Offsets for Heating.  
First, program  
the Medium  
offset.  
Press and release until the  
display shows PGM HEAT.  
AM  
Device  
M15494  
Press and release until the  
display shows OF  
Price  
Response  
(
indicating temperature  
offset).  
M15497  
Press and release until the  
display shows the desired  
Warmer  
Cooler  
(
negative) temperature  
offset.  
M15497  
5
5
69-1611  
href="
Press and release until the  
display shows the desired  
Water on/off setting for the  
Medium offset.  
Water  
On-Off-Clr  
M15497  
Press and release until the  
Appl  
On-Off-Clr display shows the desired  
Appliance on/off setting for  
the Medium offset.  
M15497  
Next, program  
the High offset.  
Press and release the key  
to show OF (indicating  
temperature offset).  
Price  
Response  
M15498  
Press and release until the  
display shows the desired  
Warmer  
Cooler  
(
negative) temperature  
offset.  
M15499  
5
6
69-1611  
href="
Press and release until the  
display shows the desired  
Water on/off setting for the  
High offset.  
Water  
On-Off-Clr  
M15501  
M15501  
M15502  
Press and release until the  
Appl  
On-Off-Clr display shows the desired  
Appliance on/off setting for  
the High offset.  
Then, program  
the Critical  
offset.  
Press and release the key  
to show OF (indicating  
temperature offset).  
Price  
Response  
Press and release until the  
display shows the desired  
Warmer  
Cooler  
(
negative) temperature  
offset.  
M15503  
5
7
69-1611  
href="
Press and release until the  
display shows the desired  
Water on/off setting for the  
Critical offset.  
Water  
On-Off-Clr  
M15503  
Press and release until the  
Appl  
On-Off-Clr display shows the desired  
Appliance on/off setting for  
the Critical offset.  
M15503  
After you have  
finished  
Press and release to return  
to the standard display.  
Present  
Setting  
programming  
offset values,  
return to  
M15484  
standard display.  
5
8
69-1611  
href="
Controlling Heat/Cool System  
With a conventional heating/cooling system, you can set the system to: HEAT, COOL or OFF. With  
a heat pump system, you can set the system to: COOL, HEAT, EM HEAT, or OFF.  
Changing the System Setting  
Manually change  
the system  
setting.  
Press and release until the  
display shows the desired  
system status.  
Heat  
Cool  
AM  
M15504  
HEAT: The thermostat controls your heating system according to the schedule you programmed.  
Heat pump models display AUX and the indicator light flashes denoting auxilliary heat  
element operation, see Table 1.  
EM HEAT: The emergency heater element of the heat pump is enabled.  
COOL: The thermostat controls your cooling system according to the schedule you pro-  
grammed.  
No status displayed: Both the heating and cooling systems are off.  
5
9
69-1611  
Controlling Fan  
There are two fan settings: AUTO and ON.  
To select the fan setting, press the Fan key. Each time you press the key, the fan status changes to  
the next setting.  
With FAN displayed, the fan is on continuously. Use this setting for improved air circulation or  
during special occasions of short duration.  
With nothing displayed, the fan is in AUTO mode (it comes on with the heating or cooling equip-  
ment, as needed). AUTO is the typical setting. If you have a two-speed fan, it usually runs on high  
with cooling and on low with heating.  
6
0
69-1611  
href="
Troubleshooting  
IF…  
THEN…  
Display does not come on.  There is no power being supplied to the thermostat. Check fuse  
or circuit breaker.  
Check the furnace air filter. A dirty filter will choke the airflow  
causing safety shutdown; replace or clean, if necessary.  
Temperature display does  
not go lower than 45°F or  
higher than 88°F during  
programming.  
You have reached the thermostat setting limit. The setting  
range is 45°F to 88°F.  
Temperature change  
occurs at the wrong time.  
Check programming for the period in question. Be sure the  
time—including AM/PM indication—is correct. Reprogram if  
necessary.  
Keep in mind that it takes time for the system to recover.  
Refer to the Recovery from Setback section for details.  
(
continued)  
6
1
69-1611  
href="
Troubleshooting Guide (continued)  
IF…  
THEN…  
Heating unit does not  
come on.  
Check that the thermostat is set to heat. If it is not, press the  
Heat/Cool key until the display indicates HEAT.  
If the temperature setting is higher than current temperature,  
and display indicates HEAT, contact your energy utility.  
Heat pump thermostats have a built-in five minute time delay  
for heating. After changing the setting, the thermostat delays  
before starting the heating to prevent equipment damage.  
Cooling does not come on.  
Check that the thermostat is set to cool. If it is not, press the  
Heat/Cool key until the display indicates COOL.  
Check the fuse or circuit breaker and replace or reset, if  
necessary.  
The thermostat has a built-in five minute time delay for cooling.  
After changing the setting, the thermostat delays before  
starting the cooling to prevent equipment damage.  
6
2
69-1611  
href="
IF…  
THEN…  
Cooling does not come on  
If temperature setting is lower than current temperature and  
the display indicates COOL, set the system control OFF for  
ten minutes. After ten minutes, return the system control to  
cool. If the cooling comes on, the compressor may have  
reached a safety limit and shut down. If the air conditioner  
does not come on after ten minutes and the display shows  
COOL, contact your energy utility.  
(continued).  
The house is too warm or  
too cool.  
Press the Present Setting key to check the temperature  
setting.  
If desired, change the temperature setting (see Holds section).  
The RSVP Rate may be adjusting the setting beyond what you  
desire. Check your offset temperatures; you may need to  
change them to provide a more comfortable temperature.  
System ON indicated but  
no heat is coming from the  
vents.  
Allow time for the furnace or heat pump to heat up and the fan  
to come on before checking for heat at the vent.  
(
continued)  
6
3
69-1611  
href="
Troubleshooting Guide (continued)  
IF… THEN…  
Thermostat current setting  Be aware that it is normal for the current setting and display  
does not match the display  
temperature.  
temperature to differ on occasion.  
During recovery from setback or setup, setting and display  
temperatures may differ during the recovery period.  
Incorrect room  
The thermostat is factory-calibrated and cannot be adjusted.  
temperature is showing on  
thermostat display.  
Thermostat is flashing  
CALL followed by a phone  
number.  
Your thermostat has lost communication with your energy  
utility. Call the number displayed on the thermostat.  
Hot water and appliance  
devices are not functioning  Communications are not properly functioning. Contact your  
per schedule.  
Verify programming for loads and Time-of-Use rate.  
energy utility.  
Temperature displayed as  
Temperature sensor has failed.  
Temperature is out of thermostat operating range.  
- -”.  
6
4
69-1611  
href="
IF…  
THEN…  
Clock gives erroneous  
reading.  
Check to see if display shows low battery, if so replace  
batteries.  
Gulf Power sets the clock and it cannot be adjusted by the  
customer. If necessary, contact your energy utility.  
Clock occasionally  
changes more than one  
minute at a time.  
Your energy utility periodically resets the clock to the correct  
time. This can change the time more than one minute (see  
Replacing the Batteries section).  
Thermostat displays:  
If condition persists for more than one minute, the thermostat  
cannot establish the communication link; contact your energy  
utility.  
bUSY”.  
6
5
69-1611  
href="
Personal Programming Charts  
Table 3. Cooling Schedule (For Summer Use).  
Morning Day Evening  
Time Setting Setting Time Setting  
Night  
Time Setting  
Cool  
Mon  
Time  
Tue  
Wed  
Thur  
Fri  
Sat  
Sun  
6
6
69-1611  
href="
Table 4. Heating Schedule (For Winter Use).  
Morning Day Evening  
Time Setting Setting Time Setting  
Night  
Time Setting  
Heat  
Mon  
Time  
Tue  
Wed  
Thur  
Fri  
Sat  
Sun  
6
7
69-1611  
href="
Table 5. Water Schedule (For Hot Water Control).  
Morning Day Evening  
Time On/Off On/Off Time On/Off  
Night  
Time On/Off  
Water  
Mon  
Time  
Tue  
Wed  
Thur  
Fri  
Sat  
Sun  
NOTE: The On setting refers to enabling the operating mode; you cannot program a water heater  
on”.  
6
8
69-1611  
href="
Table 6. Appliance Schedule (For One Appliance Control).  
Morning Day Evening  
Time On/Off On/Off Time On/Off  
Night  
Time On/Off  
Appl  
Mon  
Time  
Tue  
Wed  
Thur  
Fri  
Sat  
Sun  
6
9
69-1611  
href="
Table 7. Offset Values for RSVP Rate.  
Offsets (+) for Cooling (setpoint increase) Offsets (-) for Heating (setpoint decrease)  
Price L  
Price M  
Price H  
Price C  
Price L  
Price M  
Price H  
Price C  
N/A  
N/A  
Table 8. Water and Appliance Offsets for RSVP Rate.  
On/Off setting for Water On/Off setting for Appliance  
Price M Price H Price C  
Price L  
Price C  
Price L  
Price M  
Price H  
N/A  
N/A  
7
0
69-1611  
Warranty  
Honeywell warrants this product, excluding battery, to be free from defects in the workmanship or materials, under normal use and service, for a  
period of one (1) year from the date of purchase by the consumer. If, at any time during the warranty period, the product is defective or malfunctions,  
Honeywell shall repair or replace it (at Honeywell’s option) within a reasonable period of time.  
If the product is defective,  
(
(
i) return it, with a bill of sale or other dated proof of purchase, to the retailer from which you purchased it, or  
ii) package it carefully, along with proof of purchase (including date of purchase) and a short description of the malfunction, and mail it,  
postage prepaid, to the following address:  
Honeywell Return Goods  
1885 Douglas Drive  
Golden Valley, MN 55422  
This warranty does not cover removal or reinstallation costs. This warranty shall not apply if it is shown by Honeywell that the defect or malfunction  
was caused by damage which occurred while the product was in the possession of a consumer.  
Honeywell’s sole responsibility shall be to repair or replace the product within the terms stated above. HONEYWELL SHALL NOT BE LIABLE FOR  
ANY LOSS OR DAMAGE OF ANY KIND, INCLUDING ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING, DIRECTLY OR  
INDIRECTLY, FROM ANY BREACH OF ANY WARRANTY, EXPRESS OR IMPLIED, OR ANY OTHER FAILURE OF THIS PRODUCT. Some states  
do not allow the exclusion or limitation of incidental or consequential damages, so this limitation may not apply to you.  
THIS WARRANTY IS THE ONLY EXPRESS WARRANTY HONEYWELL MAKES ON THIS PRODUCT. THE DURATION OF ANY IMPLIED  
WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, IS HEREBY LIMITED  
TO THE ONE YEAR DURATION OF THIS WARRANTY. Some states do not allow limitations on how long an implied warranty lasts, so the above  
limitation may not apply to you.  
This warranty gives you specific legal rights, and you may have other rights which vary from state to state.  
If you have any questions concerning this warranty, please write to Home and Building Control Customer Relations, Honeywell Inc., 1985 Douglas  
Drive North, Minneapolis, Minnesota 55422. In Canada, Honeywell Limited/Honeywell Limitée, Dynamic Drive, Scarborough, Ontario, M1V 4Z9.  
7
1
69-1611  
href="
Automation and Control Solutions  
Honeywell  
Honeywell Limited-Honeywell Limitée  
985 Douglas Drive North  
1
35 Dynamic Drive  
Scarborough, Ontario  
M1V 4Z9  
Golden Valley MN 55422  
Copyright © 2002 Honeywell  
Printed in U.S.A. on recycled  
paper containing at least 10%  
All Rights Reserved ® U.S. Registered Trademark  
9-1611 2-02 G.H.  
6
post-con  
su  
mer paper fibers.  
www.honeywell.com/yourhome  

White Rodgers 1F89EZ 0251 Thermostat User Manual

Honeywell T7516B Thermostat User Manual

Honeywell RM7800G Thermostat User Manual

Honeywell CT62B Thermostat User Manual

Aube TH109PLUS Thermostat User Manual

Trane Trane Communicating Thermostats (BACnet) Thermostat User Manual

Honeywell TS8095A191108AC Thermostat User Manual

Honeywell RTH6350D1000E1 Thermostat User Manual

Honeywell Cm51 Thermostat User Manual

Honeywell TH5320C Thermostat User Manual