Honeywell TH8320 Thermostat User Manual

Home

href="
VisionPRO™ 8000 Touchscreen  
Programmable Thermostat  
PRODUCT DATA  
FEATURES  
Large, clear display with backlight shows the current  
and set temperature and time—even in the dark.  
Menu-driven programming make setup effortless.  
Beautiful ergonomic design is smart and sophisticated  
to match your customers’ lifestyle.  
Touchscreen interaction  
Real-time clock keeps time during power failures and  
automatically updates to daylight savings.  
"Saving Changes" notification lets you know when the  
schedule changes have been saved.  
Change/check reminders let you know when to service  
or replace filters or batteries.  
Various Hold options allow you to override the  
program schedule, as desired.  
Speedy same-schedule programming—no need to  
copy multiple days.  
APPLICATION  
Armchair programming allows you to remove the  
thermostat from the wall for programming.  
The VisionPRO 8000 Touchscreen Programmable Thermostat  
is an effortless, 7-Day programmable thermostat that provides  
universal system compatibility, precise comfort control and is  
easy-to-program.  
Programmable fan offers increased air quality when  
combined with a Honeywell whole-house air cleaner.  
The TH8110 Thermostats provide temperature control for gas,  
oil, electric and heat pumps for 1 heat, 1 cool systems.  
The TH8320 Thermostats provide temperature control for gas,  
oil, electric and heat pumps for up to 3 heat, 2 cool systems  
including dual fuel operation.  
The TH8321 Thermostats provide temperature control for gas,  
oil, electric and heat pumps for up to 3 heat, 2 cool systems  
including dual fuel operation plus dehumidification control.  
Contents  
Application/Features..........................................................1  
Specifications/Ordering Information ..................................2  
Installation .........................................................................4  
Wiring ................................................................................5  
Power the Thermostat.......................................................11  
Installer Setup ...................................................................15  
Installer System Test .........................................................20  
Operation...........................................................................21  
Programming.....................................................................23  
Troubleshooting.................................................................38  
®
©
U.S. Registered Trademark  
2011 Honeywell International Inc.  
6
8-0280-01  
All Rights Reserved  
href="
VisionPROTM 8000 Touchscreen Programmable Thermostat  
Shipping Temperature:  
TH8000 VisionPRO™ Thermostats: -30 °F to 150 °F  
SPECIFICATIONS  
(-34.4°C to 65.6°C).  
Thermostat Description:  
Operating Relative Humidity (Non-condensing):  
TH8000 VisionPRO Thermostats: 5% to 90%.  
C7089U: 5% to 95%.  
Feature  
Description  
Battery only  
Common wire only  
Powering methods  
C7189U: 5% to 95%.  
Common wire with battery backup  
Humidity Setting Range (TH8321 models only):  
Cooling: 40% to 80% RH.  
System types (up to  Gas, oil or electric heat with air  
3
heat/2 cool or up  
conditioning  
Humidity Display Range (TH8321 models only):  
to 1heat/1cool,  
depending on  
model)  
Warm air, hot water, high-efficiency  
furnaces, heat pumps, steam and  
gravity  
Heat only—includes power to open  
and power to close zone valves  
0% to 99%.  
Cycle Rates (at 50% Load):  
Heating: Selectable 1 - 12 cycles per hour.  
Cooling: Selectable 1 - 6 cycles per hour.  
(series 20) and normally-open zone  
valves  
Heat only with fan  
Cool only  
Finish:  
TH8000 VisionPRO™ Thermostats: Premier White® color.  
C7189U Wall Mount Remote Indoor Sensor: Premier White®  
color.  
750 mV heating systems  
Changeover  
Manual or Auto changeover selectable  
System setting  
Heat-Off-Cool-Auto (Em. Heat for heat  
pumps)  
Clock Accuracy: +/- 1 minute per month.  
Batteries:  
Fan setting  
Auto-On-Circ  
Three replaceable AAA alkaline batteries: Power thermostats  
when 24 Vac common is not used. Non-replaceable  
lithium battery with ten-year life under normal use to hold  
calendar and time settings. Alkaline batteries keep calen-  
dar and time after lithium battery is no longer functional.  
Electrical Ratings:  
Terminal  
W Heating  
W Heating  
Voltage (50/60 Hz) Running Current  
20 - 30 Vac  
750 mV dc  
.02 - 1.0A  
Resistance Characteristics of Remote Sensors:  
C7089U Outdoor Sensor: Negative temperature coefficient  
(NTC) means that resistance decreases as the  
100 mA dc  
(Powerpile)  
temperature increases. See Table 13 in the Operation  
section for sensor resistance characteristics.  
C7189U Remote Indoor Sensor: Negative temperature  
coefficient (NTC), means that resistance decreases as the  
temperature increases. See Table 14 in the Operation  
section for sensor resistance characteristics.  
Y Cooling  
G Fan  
20 - 30 Vac  
20 - 30 Vac  
.02 - 1.0A  
.02 - .60A  
Temperature Setting Range:  
Heating: 40°F to 90°F(4.5°C to 32°C).  
Cooling: 50°F to 99°F (10°C to 37°C).  
Cool Indication:  
TH8000 VisionPRO™ Touchscreen Thermostats show "Cool  
On" on the screen when Cool is activated.  
Operating Ambient Temperature:  
TH8000 VisionPRO™ Thermostats: 0°F to 120°F  
-18°C to 49°C).  
(
C7089U: -40°F to 120°F (-40°C to 49°C).  
C7189U: 45°F to 88°F (7.2°C to 32°C).  
Heat Indication:  
TH8000 VisionPRO™ Touchscreen Thermostats show “Heat  
On” on the screen when Heat is activated.  
ORDERING INFORMATION  
When purchasing replacement and modernization products from your TRADELINE® wholesaler or distributor, refer to the  
TRADELINE® Catalog or price sheets for complete ordering number.  
If you have additional questions, need further information, or would like to comment on our products or services, please write or  
phone:  
1
.
Your local Honeywell Automation and Control Products Sales Office (check white pages of your phone directory).  
Honeywell Customer Care  
2.  
1
985 Douglas Drive North  
Minneapolis, Minnesota 55422-4386  
In Canada—Honeywell Limited/Honeywell Limitée, 35 Dynamic Drive, Toronto, Ontario M1V 4Z9.  
International Sales and Service Offices in all principal cities of the world. Manufacturing in Australia, Canada, Finland, France,  
Germany, Japan, Mexico, Netherlands, Spain, Taiwan, United Kingdom, U.S.A.  
68-0280—01  
2
href="
VisionPROTM 8000 Touchscreen Programmable Thermostat  
Auxiliary Heat Indication:  
TH8000 VisionPRO™ Touchscreen Thermostats show “Aux.  
Heat On” on the screen when Auxiliary Heat is activated.  
WALLPLATE  
-3/8 (86)  
3
Emergency Heat Indication:  
TH8000 VisionPRO™ Touchscreen Thermostats show “Heat  
On” on the screen when Emergency Heat is activated and  
the System mode is in the Em. Heat position.  
3-3/8 (86)  
Calibration:  
C7089U, C7189U and TH8000 VisionPRO™ Touchscreen  
Thermostats are factory-calibrated and require no field  
calibration.  
THERMOSTAT  
AND WALLPLATE  
-3/8 (35)  
Interstage Differential:  
TH8000 VisionPRO™ Touchscreen Thermostats operate with  
droopless control. Once the thermostat senses that  
THERMOSTAT  
(152)  
1
6
1st stage is running at 90% capacity, the thermostat  
energizes 2nd stage.  
Nomenclature:  
4
(
-9/16  
116)  
System  
Power and System  
Series  
Stages Application Changeover  
VisionPRO™ 11 - 1H/1C 0 - Standard U - Universal (Auto  
000 32 - 3H/2C 1 - Humidity changeover and/or  
8
M22421  
Touchscreen  
Sensor  
manual change-  
over) dual powered,  
system flexibility,  
schedule flexibility.  
Fig. 1. TH8000 Touchscreen Thermostat  
dimensions in in. (mm).  
Mounting Means:  
1
-1/2 (38)  
TH8000 VisionPRO™ Touchscreen Thermostat: Mounts  
directly on the wall in the living space using mounting  
screws and anchors provided. Fits a vertical or horizontal  
2
x 4 in. junction box.  
C7089U Outdoor Sensor: Mounts outside of living space with  
mounting clip and screws provided.  
C7189U Remote Indoor Sensor: Mounts directly on the wall  
using mounting screws and anchors provided. Fits a  
vertical 2 x 4 in. junction box.  
Cover Plate:  
M4488  
32003796-001 Cover Plate is used to cover marks left on the  
wall by the old thermostat.  
Fig. 2. C7089U Outdoor Sensor Mounting Clip  
dimensions in in. (mm).  
Dimensions:  
TH8000 Touchscreen Thermostat: see Fig. 1.  
C7089U Outdoor Sensor Mounting Clip: see Fig. 2.  
3
2003796-001 Cover Plate: see Fig. 3.  
7
3
-7/8 (200)  
-5/16 (84)  
C7189U Remote Indoor Sensor: see Fig. 4.  
5
-1/2  
140)  
(
3
-5/16  
84)  
(
M22139  
Fig. 3. 32003796-001 Cover Plate dimensions in in. (mm).  
3
68-0280—01  
href="
VisionPROTM 8000 Touchscreen Programmable Thermostat  
4
(
-5/8  
117)  
4-5/8  
(117)  
3
(
-1/4  
83)  
1
(
-1/8  
29)  
2
-3/4 (70)  
2-3/4 (70)  
M4465  
FRONT VIEW  
SIDE VIEW  
FRONT VIEW (COVER OFF)  
Fig. 4. C7189U Remote Indoor Sensor dimensions in in. (mm).  
Do not install the thermostat where it can be affected by:  
INSTALLATION  
Drafts or dead spots behind doors and in corners.  
Hot or cold air from ducts.  
Radiant heat from sun or appliances.  
Concealed pipes and chimneys.  
Unheated (uncooled) areas such as an outside wall behind  
the thermostat.  
When Installing this Product...  
1.  
Read these instructions carefully. Failure to follow the  
instructions can damage the product or cause a hazard-  
ous condition.  
2.  
3.  
4.  
Check the ratings given in the instructions to make sure  
the product is suitable for your application.  
Installer must be a trained, experienced service  
technician.  
After completing installation, use these instructions to  
check out the product operation.  
Installing Wallplate  
CAUTION  
Electrical Hazard.  
Can cause electrical shock or equipment damage.  
Disconnect power before wiring.  
Selecting Location  
Install the thermostat about 5 ft. (1.5m) above the floor in an  
area with good air circulation at average temperature. See  
Fig. 5.  
The thermostat can be mounted horizontally on the wall or on  
a 4 in. x 2 in. (101.6 mm x 50.8 mm) wiring box.  
1.  
2.  
3.  
Position and level the wallplate (for appearance only).  
Use a pencil to mark the mounting holes.  
Remove the wallplate from the wall and, if drywall, drill  
two 3/16-in. holes in the wall, as marked. For firmer  
material such as plaster, drill two 7/32-in. holes. Gently  
tap anchors (provided) into the drilled holes until flush  
with the wall.  
NO  
YES  
NO  
NO  
5 FEET  
[
1.5 METERS]  
M19925  
Fig. 5. Selecting thermostat location.  
68-0280—01  
4
href="
VisionPROTM 8000 Touchscreen Programmable Thermostat  
4
.
.
Position the wallplate over the holes, pulling wires  
through the wiring opening. See Fig. 6.  
Insert the mounting screws into the holes and tighten.  
5
Table 1. Selecting Terminal Identifications for  
System Type.  
WALL  
Wallplate  
Terminal  
Identifications  
Wiring  
Diagram  
Reference  
WIRES THROUGH WALL  
AND WIRE SLOT  
System Type  
Standard Heat/Cool  
Heat Only  
WALL ANCHORS (2)  
Conventional  
Conventional  
Conventional  
Conventional  
9, 10  
11  
Heat Only with Fan  
12  
Heat Only (Series 20)  
Power to open and  
power to close zone  
valves  
13  
MOUNTING  
HOLES  
MOUNTING  
SCREWS (2)  
Normally Open Zone  
Valves—Heat Only  
Conventional  
14  
M19916  
Cool Only  
Conventional  
Conventional  
15  
Fig. 6. Mounting wallplate.  
Standard Multistage up  
to 2 Heat/2 Cool  
16, 17  
WIRING (FIG. 9 - 21)  
Heat Pump with No  
Auxiliary Heat  
Heat Pump  
Heat Pump  
18, 19  
20, 21  
All wiring must comply with local electrical codes and  
ordinances.  
Heat Pump with  
Auxiliary Heat  
1
.
.
Select set of terminal identifications (Table 1) that  
corresponds with system type (conventional or heat  
pump in Fig. 7).  
Loosen the screws for the appropriate system type  
selected; see Table 1. See Table 2 for terminal  
designation descriptions. Insert wires in the terminal  
block under the loosened screw. See Fig. 8.  
Securely tighten each screw.  
2
3.  
4.  
5.  
Push excess wire back into the hole.  
Plug the hole with nonflammable insulation to prevent  
drafts from affecting the thermostat.  
6.  
See Fig. 9 through 21 for typical wiring hookups.  
M19917  
HEAT PUMP  
CONVENTIONAL  
Fig. 8. Inserting wires in terminal block.  
Y2  
L
Y2  
RC  
R
RC  
R
IMPORTANT  
Use 18 gauge thermostat wire.  
E
W
Y
O/B  
Y
AUX  
S1  
S2  
W2  
S1  
S2  
G
G
C
C
SCREW TERMINALS  
M19951  
Fig. 7. Selecting terminal identifications for  
system type.  
5
68-0280—01  
href="
VisionPROTM 8000 Touchscreen Programmable Thermostat  
Table 2. Terminal Designation Descriptions.  
Terminal  
CONVENTIONAL  
2
Y2  
RC  
R
1
Designation  
Description  
W
Y
G
C
R
C
Rc (see Note  
Power for cooling--connect to  
secondary side of cooling system  
transformer  
W2  
S1  
1)  
OPTIONAL  
S2  
2
4 VAC  
COMMON  
CONNECTION  
R (see Note 1) Power for heating--connect to  
secondary side of heating system  
transformer  
3
FAN  
RELAY  
OUTDOOR/INDOOR  
TEMPERATURE  
SENSOR  
COMPRESSOR  
CONTACTOR  
C (see Note 2) Common wire from secondary side of  
cooling system transformer  
HEAT RELAY  
W
Heat relay  
1
POWER SUPPLY. PROVIDE DISCONNECT MEANS AND OVERLOAD  
PROTECTION AS REQUIRED.  
Y
Compressor contactor  
Fan relay  
2
3
FACTORY INSTALLED JUMPER.  
G
Y2  
OPTIONAL OUTDOOR OR INDOOR REMOTE SENSOR. AVAILABLE  
ON SELECT MODELS. WIRES MUST HAVE A CABLE SEPARATE  
FROM THE THERMOSTAT CABLE.  
M19895  
Second stage cooling  
Second stage heat relay  
W2  
Fig. 9. Typical hookup of conventional single-stage heat  
and cool system with single transformer  
O/B (see Note  
Changeover valve for heat pump  
systems  
3)  
(1H/1C conventional).  
AUX  
E
Auxiliary heat relay for heat pump  
systems  
CONVENTIONAL  
RC  
Emergency heat relay for heat pump  
systems  
Y2  
2
1
R
L (see note 4)  
S1, S2  
Equipment monitor for heat pump  
systems  
W
Y
G
R
C
W2  
S1  
Optional outdoor or indoor remote  
sensor  
S2  
C
OPTIONAL  
24 VAC  
COMMON  
CONNECTION  
3
FAN  
NOTES:  
RELAY  
OUTDOOR/INDOOR  
TEMPERATURE  
SENSOR  
1.  
When used in a single-transformer system, leave  
metal jumper wire in place between Rc and R. If  
used on a two-transformer system, remove metal  
jumper wire between Rc and R.  
COMPRESSOR  
CONTACTOR  
1
C
R
HEAT RELAY  
2
.
.
Common wire is optional when thermostat is used  
with batteries.  
3
If thermostat is configured for a heat pump system  
in the Installer Setup, configure changeover valve  
for cool (O-factory setting) or heat (B).  
L terminal is an input (system monitor) when the  
System mode is in the Heat, Off, Cool or Auto  
position. L terminal is a 24 Vac output when  
System mode is Emergency Heat. Must connect  
the 24 Vac Common when using the L terminal.  
See LED Indication section for more details.  
1
POWER SUPPLY. PROVIDE DISCONNECT MEANS AND OVERLOAD  
PROTECTION AS REQUIRED.  
2
3
REMOVE FACTORY INSTALLED JUMPER.  
4.  
OPTIONAL OUTDOOR OR INDOOR REMOTE SENSOR. AVAILABLE  
ON SELECT MODELS. WIRES MUST HAVE A CABLE SEPARATE  
FROM THE THERMOSTAT CABLE.  
M19896  
Fig. 10. Typical hookup of conventional single-stage heat  
and cool system with two transformers  
(1H/1C conventional).  
68-0280—01  
6
href="
VisionPROTM 8000 Touchscreen Programmable Thermostat  
CONVENTIONAL  
2
CONVENTIONAL  
Y2  
RC  
R
Y2  
RC  
R
1
2
1
W
Y
G
C
R
C
W
Y
G
C
R
C
W2  
S1  
W2  
S1  
OPTIONAL  
S2  
S2  
2
4 VAC  
COMMON  
CONNECTION  
3
3
HEAT RELAY  
OUTDOOR/INDOOR  
TEMPERATURE  
SENSOR  
OUTDOOR/INDOOR  
TEMPERATURE  
SENSOR  
W
B
R
SERIES 20  
MOTOR OR  
VALVE  
TR TR  
1
POWER SUPPLY. PROVIDE DISCONNECT MEANS AND OVERLOAD  
PROTECTION AS REQUIRED.  
2
3
FACTORY INSTALLED JUMPER.  
1
POWER SUPPLY. PROVIDE DISCONNECT MEANS AND OVERLOAD  
PROTECTION AS REQUIRED.  
OPTIONAL OUTDOOR OR INDOOR REMOTE SENSOR. AVAILABLE  
ON SELECT MODELS. WIRES MUST HAVE A CABLE SEPARATE  
FROM THE THERMOSTAT CABLE.  
2
3
FACTORY INSTALLED JUMPER.  
M19897  
OPTIONAL OUTDOOR OR INDOOR REMOTE SENSOR. AVAILABLE  
ON SELECT MODELS. WIRES MUST HAVE A CABLE SEPARATE  
FROM THE THERMOSTAT CABLE.  
M19899  
Fig. 11. Typical hookup of heat-only system  
(1 H conventional).  
Fig. 13. Typical hookup of heat only power to open and  
power to close zone valve (Series 20) system.  
CONVENTIONAL  
RC  
CONVENTIONAL  
Y2  
2
1
R
Y2  
RC  
R
W
Y
G
R
C
2
1
W2  
S1  
W
Y
R
C
W2  
S1  
OPTIONAL  
S2  
C
2
4 VAC  
G
COMMON  
OPTIONAL  
24 VAC  
COMMON  
S2  
C
CONNECTION  
3
FAN  
RELAY  
CONNECTION  
OUTDOOR/INDOOR  
TEMPERATURE  
SENSOR  
3
HEAT RELAY  
OUTDOOR/INDOOR  
TEMPERATURE  
SENSOR  
4
NORMALLY OPEN  
ZONE VALVE  
1
POWER SUPPLY. PROVIDE DISCONNECT MEANS AND OVERLOAD  
PROTECTION AS REQUIRED.  
1
POWER SUPPLY. PROVIDE DISCONNECT MEANS AND OVERLOAD  
PROTECTION AS REQUIRED.  
2
3
FACTORY INSTALLED JUMPER.  
OPTIONAL OUTDOOR OR INDOOR REMOTE SENSOR. AVAILABLE  
ON SELECT MODELS. WIRES MUST HAVE A CABLE SEPARATE  
FROM THE THERMOSTAT CABLE.  
2
3
FACTORY INSTALLED JUMPER.  
OPTIONAL OUTDOOR OR INDOOR REMOTE SENSOR. AVAILABLE  
ON SELECT MODELS. WIRES MUST HAVE A CABLE SEPARATE  
FROM THE THERMOSTAT CABLE.  
M19898  
4
CONFIGURE SYSTEM TYPE TO HEAT ONLY WITH NORMALLY OPEN  
ZONE VALVES IN INSTALLER SETUP.  
M22422  
Fig. 12. Typical hookup of heat only system with fan  
1H conventional).  
(
Fig. 14. Typical hookup of heat only system with normally  
open zone valves.  
7
68-0280—01  
href="
VisionPROTM 8000 Touchscreen Programmable Thermostat  
CONVENTIONAL  
CONVENTIONAL  
Y2  
RC  
R
2
1
Y2  
RC  
R
W
Y
G
R
C
2
1
W2  
S1  
OPTIONAL  
24 VAC  
COMMON  
CONNECTION  
MUST COME  
FROM THE  
W
Y
R
C
OPTIONAL  
W2  
S1  
S2  
C
2
4 VAC  
G
COMMON  
CONNECTION  
S2  
C
COOLING  
TRANSFORMER.  
FAN  
RELAY  
3
OUTDOOR/INDOOR  
TEMPERATURE  
SENSOR  
3
FAN  
RELAY  
COMPRESSOR  
CONTACTOR  
OUTDOOR/INDOOR  
TEMPERATURE  
SENSOR  
COOL RELAY 2  
HEAT RELAY 1  
COOL RELAY 1  
1
1
POWER SUPPLY. PROVIDE DISCONNECT MEANS AND OVERLOAD  
PROTECTION AS REQUIRED.  
R
HEAT RELAY 2  
C
2
3
FACTORY INSTALLED JUMPER.  
1
POWER SUPPLY. PROVIDE DISCONNECT MEANS AND OVERLOAD  
PROTECTION AS REQUIRED.  
OPTIONAL OUTDOOR OR INDOOR REMOTE SENSOR. AVAILABLE  
ON SELECT MODELS. WIRES MUST HAVE A CABLE SEPARATE  
FROM THE THERMOSTAT CABLE.  
M19900  
2
3
FACTORY INSTALLED JUMPER.  
OPTIONAL OUTDOOR OR INDOOR REMOTE SENSOR. AVAILABLE  
ON SELECT MODELS. WIRES MUST HAVE A CABLE SEPARATE  
FROM THE THERMOSTAT CABLE.  
Fig. 15. Typical hookup of cool only system  
M19902B  
(1C conventional).  
Fig. 17. Typical hookup of conventional multistage  
two-stage heating and two-stage cooling in a  
two-transformer system (2H/2C, 2H/1C or  
1H/2C conventional).  
CONVENTIONAL  
RC  
Y2  
2
R
1
OPTIONAL  
4 VAC  
COMMON  
R
C
W
Y
2
W2  
S1  
CONNECTION  
G
C
MUST COME  
FROM THE  
COOLING  
S2  
TRANSFORMER.  
3
FAN  
RELAY  
OUTDOOR/INDOOR  
TEMPERATURE  
SENSOR  
COOL RELAY 2  
HEAT RELAY 1  
COOL RELAY 1  
HEAT RELAY 2  
1
POWER SUPPLY. PROVIDE DISCONNECT MEANS AND OVERLOAD  
PROTECTION AS REQUIRED.  
2
3
FACTORY INSTALLED JUMPER.  
OPTIONAL OUTDOOR OR INDOOR REMOTE SENSOR. AVAILABLE  
ON SELECT MODELS. WIRES MUST HAVE A CABLE SEPARATE  
FROM THE THERMOSTAT CABLE.  
M22438B  
Fig. 16. Typical hookup of conventional multistage  
two-stage heating and two-stage cooling in a  
single-transformer system  
(2H/2C, 2H/1C or 1H/2C conventional).  
68-0280—01  
8
href="
VisionPROTM 8000 Touchscreen Programmable Thermostat  
HEAT PUMP  
1
R
C
Y2  
L
RC  
2
R
3
E
Y
SI  
G
OPTIONAL 24 VAC  
COMMON CONNECTION  
C
FAN RELAY  
OUTDOOR/INDOOR  
TEMPERATURE  
SENSOR  
4
CHANGEOVER  
VALVE  
COMPRESSOR  
RELAY  
1
2
3
4
POWER SUPPLY. PROVIDE DISCONNECT MEANS AND OVERLOAD PROTECTION AS REQUIRED.  
FACTORY INSTALLED JUMPER.  
"O/B" TERMINAL SET TO CONTROL AS EITHER "O" OR "B" IN THE INSTALLER SETUP.  
OPTIONAL OUTDOOR OR INDOOR REMOTE SENSOR. AVAILABLE ON SELECT MODELS. WIRES MUST HAVE A CABLE SEPARATE  
FROM THE THERMOSTAT CABLE.  
M19903B  
Fig. 18. Typical hookup of single-stage heat pump with no auxiliary/backup heat (1H/1C heat pump).  
HEAT PUMP  
1
R
C
Y2  
L
RC  
R
2
3
4
E
Y
G
C
SI  
OPTIONAL 24 VAC  
COMMON CONNECTION  
OUTDOOR/INDOOR  
TEMPERATURE  
SENSOR  
FAN RELAY  
5
CHANGEOVER  
VALVE  
COMPRESSOR 2  
COMPRESSOR 1  
1
2
3
POWER SUPPLY. PROVIDE DISCONNECT MEANS AND OVERLOAD PROTECTION AS REQUIRED.  
FACTORY INSTALLED JUMPER.  
MUST CONNECT THE 24 VAC COMMON WHEN USING L. THE TERMINAL IS SHOWN AS EQUIPMENT MONITOR, CAN ALSO BE USED AS A 24 VAC  
OUTPUT. SEE "HEAT PUMP LED" SECTION FOR MORE INFORMATION.  
4
5
"O/B" TERMINAL SET TO CONTROL AS EITHER "O" OR "B" IN THE INSTALLER SETUP.  
OPTIONAL OUTDOOR OR INDOOR REMOTE SENSOR. AVAILABLE ON SELECT MODELS. WIRES MUST HAVE A CABLE SEPARATE FROM THE  
THERMOSTAT CABLE.  
M19904  
Fig. 19. Typical hookup of multistage heat pump with no auxiliary/backup heat (2H/2C heat pump).  
9
68-0280—01  
href="
VisionPROTM 8000 Touchscreen Programmable Thermostat  
EQUIPMENT  
MONITOR  
HEAT PUMP  
1
R
C
Y2  
2
5
L
R
6
E
Y
G
C
SI  
OPTIONAL 24 VAC  
COMMON CONNECTION  
3
FAN RELAY  
OUTDOOR/INDOOR  
TEMPERATURE  
SENSOR  
4
CHANGEOVER  
VALVE  
HEAT 2 RELAY  
AUXILIARY HEAT)  
EMERGENCY  
HEAT RELAY  
COMPRESSOR  
RELAY  
(
1
2
3
4
POWER SUPPLY. PROVIDE DISCONNECT MEANS AND OVERLOAD PROTECTION AS REQUIRED.  
FACTORY INSTALLED JUMPER.  
OUTDOOR SENSOR REQUIRED IN SYSTEM WITH FOSSIL FUEL BACKUP HEAT THAT IS NOT USING AN EXTERNAL FOSSIL FUEL KIT.  
OPTIONAL OUTDOOR OR INDOOR REMOTE SENSOR. AVAILABLE ON SELECT MODELS. WIRES MUST HAVE A CABLE SEPARATE  
FROM THE THERMOSTAT CABLE.  
5
6
MUST CONNECT THE 24 VAC COMMON WHEN USING L. THE TERMINAL IS SHOWN AS EQUIPMENT MONITOR, CAN ALSO BE USED AS  
A 24 VAC OUTPUT. SEE "HEAT PUMP LED" SECTION FOR MORE INFORMATION.  
"O/B" TERMINAL SET TO CONTROL AS EITHER "O" OR "B" IN THE INSTALLER SETUP.  
M19905  
Fig. 20. Typical hookup of single-stage heat pump with auxiliary/backup heat (2H/1C heat pump).  
EQUIPMENT  
MONITOR  
HEAT PUMP  
1
R
C
Y2  
L
2
5
R
6
E
Y
G
C
SI  
OPTIONAL 24 VAC  
COMMON CONNECTION  
3
OUTDOOR/INDOOR  
TEMPERATURE  
SENSOR  
FAN RELAY  
4
CHANGEOVER  
VALVE  
HEAT 2 RELAY  
AUXILIARY HEAT)  
(
EMERGENCY  
HEAT RELAY  
COMPRESSOR 2  
COMPRESSOR 1  
1
2
3
4
POWER SUPPLY. PROVIDE DISCONNECT MEANS AND OVERLOAD PROTECTION AS REQUIRED.  
FACTORY INSTALLED JUMPER.  
OUTDOOR SENSOR REQUIRED IN SYSTEM WITH FOSSIL FUEL BACKUP HEAT THAT IS NOT USING AN EXTERNAL FOSSIL FUEL KIT.  
OPTIONAL OUTDOOR OR INDOOR REMOTE SENSOR. AVAILABLE ON SELECT MODELS. WIRES MUST HAVE A CABLE SEPARATE  
FROM THE THERMOSTAT CABLE.  
5
6
MUST CONNECT THE 24 VAC COMMON WHEN USING L. THE TERMINAL IS SHOWN AS EQUIPMENT MONITOR, CAN ALSO BE USED AS  
A 24 VAC OUTPUT. SEE "HEAT PUMP LED" SECTION FOR MORE INFORMATION.  
"O/B" TERMINAL SET TO CONTROL AS EITHER "O" OR "B" IN THE INSTALLER SETUP.  
M19906  
Fig. 21. Typical hookup of multistage heat pump with auxiliary/backup heat (3H/2C heat pump).  
68-0280—01  
10  
href="
VisionPROTM 8000 Touchscreen Programmable Thermostat  
POWER THE THERMOSTAT  
You can choose from three methods to power the thermostat:  
2. Locate and remove the tab labeled, Remove, in the  
lower left corner on the thermostat back. See  
Fig. 23.  
Batteries only (AAA alkaline).  
24 Vac common wire only.  
24 Vac common wire with battery backup (AAA alkaline).  
Wiring 24 Vac Common  
REMOVE  
TAB  
Single-Transformer System—Connect the common side of  
the transformer to the C screw terminal of the thermostat  
wallplate. Leave the metal jumper wire in place between  
Rc and R.  
OMEVDUNRIG  
LSATINO  
Two-Transformer System—Connect the common side of  
the cooling transformer to the C screw terminal of the  
thermostat wallplate. Remove the metal jumper wire  
between Rc and R.  
M
V
 D
  I
  G
SALTION  
Installing Batteries  
1.  
Install three AAA alkaline batteries on the back of the  
thermostat as marked on the thermostat. See  
Fig. 22.  
M19920  
Fig. 23. Remove tab labeled, Remove, on  
thermostat back.  
Mount Thermostat to Wallplate  
1.  
Align the terminal screw blocks with the pins on the  
back of the thermostat. Push the thermostat straight  
onto the wallplate until it snaps into place. See Fig 24.  
WALLPLATE  
BATTERIES (3)  
M19918  
PINS ON  
BACK OF  
THERMOSTAT  
Fig. 22. Installing batteries.  
TERMINAL  
SCREW  
BLOCK  
M22213  
Fig. 24. Mount thermostat to wallplate.  
11  
68-0280—01  
href="
VisionPROTM 8000 Touchscreen Programmable Thermostat  
IMPORTANT  
Erratic temperature readings from a sensor can  
Locate and Mount C7089U Outdoor  
Temperature Sensor (Optional)  
occur as a result of any of the wiring practices  
described below. Avoid these practices to assure  
correct operation. Use shielded cable to reduce  
interference if rerouting sensor wiring is not possible.  
Mount the sensor where (see Fig. 25):  
cannot tamper with settings.  
there is good air circulation.  
it can measure true outdoor ambient temperature.  
surface is flat.  
wire distance between C7089 and thermostat is less than  
Be sure wires have a cable separate from the  
thermostat cable.  
Do not route temperature sensor wiring with building  
power wiring, next to control contactors or near light  
dimming circuits, electric motors or welding  
equipment.  
200 feet.  
Do not mount the sensor:  
in direct sunlight.  
where hot or cold air blows on the sensor. Discharge line  
from an outdoor compressor unit, vent or fan causes  
inaccurate temperature readings.  
Avoid poor wiring connections.  
Avoid intermittent or missing building earth ground.  
where snow, ice or debris can cover it.  
Use the following steps to mount the sensor:  
CAUTION  
Can cause electrical shock or equipment damage.  
1
2
.
.
Remove the sensor from the mounting clip.  
Mark the area on the location selected for mounting the  
sensor mounting clip.  
Electrical Shock Hazard.  
Disconnect power supply before connecting wiring.  
3.  
Mount the clip.  
Wiring must comply with applicable codes, ordinances and  
regulations:  
1.  
Wire C7089 Outdoor Sensor to S1and S2 terminals on  
the thermostat. If leadwire provided is not long enough  
(
60 in.), run a cable to a hole at C7089 location.  
a. Using color-coded, 18-gauge thermostat wire is  
recommended. For example of general wiring of  
C7089, see Fig. 26.  
b. Pigtail wiring can be used.  
Mount C7089 in its mounting clip.  
Plug wiring hole using nonhardening caulk or putty.  
2
3
.
.
1
WIRING HOLE  
THROUGH  
STRUCTURE  
C7089  
2
M7514  
Fig. 25. Typical locations for C7089U Outdoor Sensor.  
Wire C7089U Outdoor Sensor  
CAUTION  
1
2
USE APPROPRIATE MOUNTING MEANS FOR THE  
TYPE OF STRUCTURE.  
PLUG WIRING HOLE WITH NON-HARDENING CAULK  
Electrical Interference (Noise) Hazard.  
Can cause erratic system operation.  
Keep wiring at least one foot away from large inductive  
loads such as motors, line starters, lighting ballasts  
and large power distribution panels.  
Use shielded cable to reduce interference when  
rerouting is not possible.  
OR PUTTY.  
M19970  
Fig. 26. Wire C7089 Outdoor Sensor to the thermostat.  
68-0280—01  
12  
href="
VisionPROTM 8000 Touchscreen Programmable Thermostat  
Locate and Mount C7189U Remote Indoor  
Temperature Sensor (Optional)  
Wire C7189 Indoor Sensor  
1.  
Choose a location (see Fig. 27) for mounting the sensor  
on an inside wall about 5 ft (1.5m) above the floor. A  
vertically-mounted standard 2 x 4 in. (51 x 102 mm)  
junction box can also be used.  
CAUTION  
Electrical Interference (Noise) Hazard.  
Can cause erratic system operation.  
Keep wiring at least one foot away from large inductive  
loads such as motors, line starters, lighting ballasts  
and large power distribution panels.  
2
.
.
Be sure wire distance between C7189 and thermostat is  
less than 200 feet.  
Make sure there is good air circulation at average  
temperature at the chosen location. Avoid the following  
locations because they can introduce errors in sensor  
measurements. See Fig. 27.  
3
IMPORTANT  
Erratic temperature readings from a sensor can  
occur as a result of any of the wiring practices  
described below. Avoid these practices to assure  
correct operation.  
a. Hot areas caused by:  
(
(
(
a) Concealed pipes or ducts.  
b) Drafts from fireplaces or other heat sources.  
c) Convection or radiant heat from the sun or  
electrical equipment.  
— Be sure wires have a cable separate from the  
thermostat cable.  
— Do not route temperature sensor wiring with building  
power wiring, next to control contactors or near light  
dimming circuits, electric motors or welding  
equipment.  
b. Cold areas caused by:  
(
(
(
a) Concealed pipes or ducts.  
b) Drafts from windows and doors.  
c) Unheated areas on the other side of the wall  
location.  
c. Dead air areas:  
— Avoid poor wiring connections.  
— Avoid intermittent or missing building earth ground.  
(
(
a) Behind doors, furniture and curtains.  
b) In corners and alcoves.  
4
.
.
Mark the area on the wall selected for mounting the  
C7189 Sensor or junction box.  
Run wire cable to a hole at the selected wall location.  
Pull approximately three inches of wire through the  
opening. Color-coded, 18-gauge thermostat wire is  
recommended.  
CAUTION  
5
Electrical Shock Hazard.  
Can cause electrical shock or equipment damage.  
Disconnect power supply before connecting wiring.  
Wiring must comply with applicable codes, ordinances and  
regulations.  
1.  
Wire C7189 Indoor Sensor to S1and S2 terminals on  
the thermostat. For an example of general wiring of  
C7189, see Fig. 28 to wire one sensor and 29 to wire  
multiple sensors.  
YES  
NO  
2.  
Push excess wire back into the hole. Plug the hole  
using nonhardening caulk, putty or insulation to prevent  
drafts from affecting performance.  
NO  
5
FEET  
1.5 METERS)  
(
3
4
.
.
Remove C7189 cover.  
Mount C7189 to the wall or junction box using the  
NO  
screws and anchors provided.  
Level the C7189 for appearance only. Device functions  
correctly even when not level.  
5
.
.
6
Install C7189 cover.  
M4476  
Fig. 27. Typical location for C7189 Indoor Sensor.  
13  
68-0280—01  
href="
VisionPROTM 8000 Touchscreen Programmable Thermostat  
Set Calendar and Time  
C7189  
Thermostat keeps current time and day for up to ten years  
under normal use after the calendar is set.  
2
3
When the thermostat is first powered, the display is ready to  
set the calendar and time.  
Y2  
RC  
1
R
C
NOTE: Calendar can also be set in the Installer Setup.  
1
2
.
.
Press the arrow keys to set the year, month and day.  
Press the Done key.  
SET CURRENT DAY  
SET MONTH  
1
2
3
POWER SUPPLY. PROVIDE DISCONNECT MEANS AND  
OVERLOAD PROTECTION AS REQUIRED.  
IF MORE THAN ONE C7189 REMOTE SENSOR IS REQUIRED,  
REFER TO FIGURE 3.  
MO  
TUE  
WE  
TH  
FR  
SA  
SU  
WIRES MUST HAVE A CABLE SEPARATE FROM THE  
THERMOSTAT CABLE.  
M19972  
Fig. 28. Wiring a single C7189 Indoor Sensor.  
DONE  
Y2  
W2  
1
1
USE ARROWS TO SET YEAR AND TIME  
M22424  
2
C7189  
C7189  
C7189  
C7189  
S2  
Y2  
3
4
.
.
Press the arrow keys to set the current time.  
Press the Done Key.  
USE ARROWS TO SET YEAR AND TIME  
W2  
1
1
2
C7189  
C7189  
C7189  
C7189  
C7189  
C7189  
C7189  
2
MO  
WE  
TH  
FR  
SA  
SU  
C7189  
C7189  
DONE  
1
2
SENSORS MUST BE ARRANGED IN THIS  
CONFIGURATION TO OPERATE CORRECTLY.  
M22425  
WIRES MUST HAVE A CABLE SEPARATE FROM THE  
THERMOSTAT CABLE.  
M19973  
Fig. 29. Wiring Multiple C7189 Sensors.  
68-0280—01  
14  
href="
VisionPROTM 8000 Touchscreen Programmable Thermostat  
INSTALLER SETUP  
Follow these steps to enter the Installer Setup:  
3. Release the two blank keys when the screen on the  
thermostat matches the screen below.  
1.  
Press and release the System Key.  
THU  
FAN  
ON  
Inside  
Set To  
AUTO  
Following  
Schedule  
SYSTEM  
EM HEAT  
OFF  
A
COOL  
M
DONE  
SCHED HOLD CLOCK SCREE  
M22442  
M22426A  
2.  
Press and hold the two blank keys on either side of the  
center blank key for approximately five seconds until  
screen changes.  
4.  
See screen below to review how the thermostat keys  
are used during Installer Setup. See Tables 3-5 for the  
Installer Setup Numbers and Settings.  
MON  
TUE  
WED  
THU  
FRI  
SAT  
SUN  
ADVANCE TO NEXT  
INSTALLER SETUP  
Inside  
Set To  
INSTALLER  
SETUP  
NUMBER  
Following  
Schedule  
CURRENT  
SETTING  
SYSTEM  
EM HEAT  
OFF  
COOL  
PM  
DONE  
CANCEL  
MON  
WED  
THU  
FRI  
SAT  
SUN  
DONE  
M19923  
PRESS TO EXIT  
INSTALLER SETUP  
CHANGE THE  
CURRENT  
SETTING  
M22443  
5.  
Press the Done key to exit the Installer Setup screen.  
15  
68-0280—01  
href="
VisionPROTM 8000 Touchscreen Programmable Thermostat  
Table 3. Installer Setup Menu.  
Settings  
Installer Setup  
Number  
Installer Setup Name  
Date (Year Upper)  
Date (Year Lower)  
Notes  
0120  
Select first two digits of current calendar year (2005, etc) 2001 - 2178 available  
0130  
Select last two digits of current calendar year (05 for year 2001 - 2178 available  
2
005, etc)  
0140  
0150  
0160  
Date (Month)  
Date (Day)  
Select number that represents current calendar month  
Select number that represents current calendar date  
0—nonprogrammable  
Schedule Options  
4
—7-day programmable  
0170  
System Type Selection 1—1 heat/1 cool conventional (factory setting)  
Available options and  
defaults vary by  
2
3
4
5
—single-stage heat pump (no auxiliary heat)  
—heat only conventional (no fan) Also for 750mV.  
—heat only conventional (with fan)  
thermostat. System  
selection automatically  
modifies some default  
settings and/or hides  
other Installer Setup  
options.  
—heat only (power to open and power to close zone  
valves or normally-open zone valves)  
6
7
8
9
1
—cool only conventional  
—2 heat/1 cool heat pump (with auxiliary heat)  
—2 heat/2 cool multistage conventional  
—2 heat/1 cool multistage conventional  
0—1 heat/2 cool multistage conventional  
1
1
1—2 heat/2cool heat pump (no auxiliary heat)  
2—3 heat/2cool heat pump (with auxiliary heat)  
0
180  
190  
Fan Control in Heating 0—gas or oil furnace equipment controls fan in heating  
factory setting)  
—electric furnace—thermostat controls fan in heating  
Only shown if  
(
1
conventional system is  
selected. If heat pump is  
chosen, fan defaults to  
electric.  
0
ChangeoverValve—O/B 0—changeover valve—O/B terminal is energized in  
Only shown if heat pump  
system is chosen.  
Terminal Energized in  
cooling (factory setting)  
Heating or Cooling  
1—changeover valve—O/B terminal is energized in  
heating  
(
Heat Pumps Only)  
Backup Heat Source  
Auxiliary Heat)  
0
200  
210  
0—heat pump backup heat source is electric (factory  
setting)  
Only shown if 2 heat/  
1 cool or 3 heat/2 cool  
heat pump is chosen  
(
1
—heat pump backup heat source is fossil fuel  
0
External Fuel Fossil  
Fuel Kit  
0—no external fossil fuel kit is controlling heat pump  
Only shown if fossil fuel is  
backup heat. This thermostat controls the dual fuel. Must chosen as backup heat  
install outdoor sensor and set Installer Setup Number  
source.  
0
1
340 to number 2.  
—external fossil fuel kit is controlling heat pump backup  
heat  
Cycles per hour (cph) for 3—cph recommended for compressors (factory setting)  
st Stage Compressor 1, 2, 4, 5, 6—other cycle rate settings  
Cycles per hour (cph) for 3—cph recommended for compressors (factory setting)  
nd Stage Compressor 1, 2, 4, 5, 6—other cycle rate settings  
Cycles per hour (cph) for 1 1 cph used for steam and gravity  
st Stage Conventional 3—3 cph used for hot water system and high efficiency  
Heat (90% or better) furnaces  
0220  
0230  
0240  
1
Only shown if two stages  
of cool are selected.  
2
Not shown if system  
selection is heat pump.  
1
5
8
9
2
—5 cph used for standard fossil fuel forced air (less than Selection in this stage  
changes default cph for  
2nd stage heat.  
0% efficient) systems (factory setting)  
—9 cph used for electric furnaces  
, 4, 6, 7, 8, 10, 11, 12—other cycle rate settings  
0250  
Cycles per hour (cph) for 1—1 cph used for steam and gravity  
Only shown if two stages  
2nd Stage Heat (Aux  
3—3 cph for hot water systems and high efficiency (90% of heat are selected.  
or better) furnaces  
Heat for 2H/1C Heat  
Pumps)  
5—5 cph for standard fossil fuel forced air (less than 90%  
efficient) systems (factory setting)  
9
—9 cph used for electric furnaces or electric auxiliary  
heat for heat pump systems  
2
, 4, 6, 7, 8, 10, 11, 12—other cycle rate settings  
68-0280—01  
16  
href="
VisionPROTM 8000 Touchscreen Programmable Thermostat  
Table 3. Installer Setup Menu. (Continued)  
Installer Setup  
Number  
Installer Setup Name  
Settings  
Notes  
0260  
Cycles per hour (cph) for 1—1 cph used for steam and gravity  
Only shown if 3H/2C  
3
(
rd Stage Heat  
Aux Heat for 3H/2C  
Heat Pumps)  
3—3 cph for hot water systems and high efficiency (90% heat pump is selected.  
or better) furnaces  
5—5 cph for standard fossil fuel forced air (less than 90%  
efficient) systems (factory setting)  
9
—9 cph used for electric furnaces or electric auxiliary  
heat for heat pump systems  
, 4, 6, 7, 8, 10, 11, 12—other cycle rate settings  
2
0
270  
280  
Cycles per hour (cph) for 3—3 cph for hot water systems and high efficiency (90% Only shown if 2H/1C or  
Em Heat or better) furnaces 3H/2C heat pump is  
5
—5 cph for standard fossil fuel forced air (less than 90% selected.  
efficient or better) systems  
—9 cph for electric strip heat for heat pumps  
9
0
Continuous Backlight  
0—Backlight not on continuously. Thermostat backlight  
comes on with each key press.  
Option is always shown;  
however, continuously on  
—Backlight is on continuously (thermostat must have a backlight works only if  
thermostat is wired with  
4 Vac Common.  
1
common wire attached for this function).  
2
0
300  
310  
Changeover  
Deadband  
0—manual changeover (factory setting)  
1
—auto changeover  
Heating and cooling setpoints can be set no closer than Shown only if automatic  
chosen value: changeover is selected.  
0
° °  
—2 F (1.5 C)  
° °  
2
3
4
5
6
7
8
9
—3 F (2 C)  
°
°
—4 F (2.5 C)  
°
°
—5 F (3 C)  
°
°
—6 F (3.5 C)  
°
°
—7 F (4 C)  
°
°
—8 F (4.5 C)  
°
°
—9 F (5 C)  
0
320  
330  
Temperature Indication 0—fahrenheit temperature display (factory setting)  
Scale  
1—celsius temperature display  
0
Daylight Savings  
1—daylight savings is on (factory setting).  
Set to 0 in areas that do  
not follow daylight  
savings.  
0
—daylight savings is off.  
0340  
Remote Temperature  
Sensor (Outdoor or  
Indoor)  
0—no remote temperature sensor  
Defaults and Options  
depend on System Type  
selection.  
1— o u t d o o r t e m p e r a t u r e s e n s o r f o r d i s p l a y o n l y.  
2—outdoor temperature sensor for control. Outdoor  
sensor used for Heat Pump Lockout settings. (See Heat  
Pump Temperature Lockout section for more details.)  
Indoor Temperature  
3
—indoor temperature sensor  
Sensor uses an averaging  
network and does not  
include on-board sensor.  
0350  
Heat Pump Compressor 0—no compressor lockout.  
Default depends on other  
selections. Shown if  
Outdoor Temperature for  
control is selected. (See  
Advanced Features  
section for more  
Lockout or (Balance  
Point)  
° °  
5 F (-9.5 C)  
° °  
1
2
2
3
3
4
4
0 F (-6.5 C)  
°
°
5 F (-4 C)  
°
°
0 F (-1 C)  
°
°
information.)  
5 F (1.5 C)  
°
°
0 F (4.5 C)  
°
°
5 F (7 C)  
17  
68-0280—01  
href="
VisionPROTM 8000 Touchscreen Programmable Thermostat  
Table 3. Installer Setup Menu. (Continued)  
Installer Setup  
Number  
Installer Setup Name  
Settings  
0—no auxiliary heat lockout.  
Notes  
0360  
Heat Pump Auxiliary  
Lockout  
Shown if electric is  
chosen for backup heat  
source and outdoor  
temperature sensor for  
control is selected. (See  
Advanced Features  
section for more  
° °  
0 F (4.5 C)  
° °  
4
4
5
5
6
5 F (7 C)  
°
°
0 F (10 C)  
°
°
5 F (13 C)  
°
°
0 F (15.5 C)  
information.)  
0380  
Indoor Dehumidification 0—No indoor dehumidification control.  
Available on select  
models.  
Control  
1—Dehumidification control activated.  
If dehumidification control  
is activated and auto-  
changeover is selected in  
Installer Setup Number  
0
300, the deadband  
minimum is defaulted to  
5°  
310.  
F (3 C) in Number  
°
0
0
500  
510  
Furnace Change  
Reminder  
0—furnace filter reminder off  
1—10 run time days  
Run time based on call for  
fan.  
2
3
4
5
6
—30 run time days  
—60 run time days  
—90 run time days  
—120 run time days  
—365 run time days  
0
Humidifier Pad  
0—humidifier pad replacement reminder off  
Replacement Reminder 1—90 calendar days  
2
3
180 calendar days  
365 calendar days  
0
520  
530  
UV Lamp Replacement 0—UV lamp replacement reminder off  
Reminder  
1—365 calendar days  
0
Adaptive Intelligent  
Recovery™  
1—Adaptive Intelligent Recovery™ control is activated  
(system starts early so setpoint is reached by start of  
program period).  
0
Conventional Recovery (system starts recovery at  
programmed time)  
0
540  
580  
Number of Periods  
2—two periods available (Wake and Sleep)  
Not shown if non-  
programmable is  
selected. 2 or 4 applies to  
all days of the week.  
4
four periods available (Wake, Leave, Return and  
Sleep)  
0
Minimum Compressor  
Off Time  
5—five-minute compressor off-time setting (factory  
setting)  
0
, 2, 3, 4—other compressor off-time settings  
0600  
0610  
0640  
Heat Temperature  
Range Stop  
40-90—temperature range (1°F increments) of heating  
setpoint.  
Shown in 1/2 °C.  
Shown in 1/2 °C.  
Cool Temperature  
Range Stop  
50-99—temperature range (1°F increments) of cooling  
setpoint.  
Clock Format  
12—12 hour clock (factory setting)  
2
4—24 hour clock  
68-0280—01  
18  
href="
VisionPROTM 8000 Touchscreen Programmable Thermostat  
Table 3. Installer Setup Menu. (Continued)  
Installer Setup  
Number  
Installer Setup Name  
Settings  
Notes  
0650  
Extended Fan OnTime 0—no extended fan operation after call for heat ends  
Not shown if fan operation  
is set to fossil fuel or in  
Cool Only Systems  
Heat  
90— fan operation is extended 90 seconds after call for  
heat ends.  
0660  
Extended Fan On Time 0—no extended fan operation after call for cool ends  
Not shown in Heat Only  
Systems.  
Cool  
90—fan operation is extended 90 seconds after call for  
cool ends.  
0670  
Keypad Lockout  
0—unlocked keypad  
Unlocked—all functions  
are available.  
1
—partially locked keypad  
2
—fully locked keypad  
Partially locked—only  
temperature up and down  
keys and ability to enter  
and modify Installer Setup  
m o d e a r e a v a i l a b l e .  
Fully locked—only ability  
to enter and modify  
Installer Setup mode are  
available.  
0680  
Temperature Control in 1—less aggressive temperature control (could cause  
Heat temperature undershoot)  
Standard temperature control in heating (factory  
setting)  
—more aggressive temperature control (could cause  
temperature overshoot)  
Applies to recovery ramp  
and use of auxiliary heat  
during recovery.  
2
3
Choose 1 if getting  
temperature overshoot.  
Choose 3 if getting  
temperature undershoot.  
0
690  
700  
Temperature Control in 1—less aggressive temperature control (could cause  
Applies to recovery ramp.  
Cool  
temperature undershoot)  
Standard temperature control in cooling  
factory setting)  
—more aggressive temperature control (could cause  
temperature overshoot)  
2
(
3
Choose 1 if getting  
temperature overshoot.  
Choose 3 if getting  
temperature undershoot.  
0
Temperature Display  
Offset  
°
°
-
-
-
3 — F (-1.5 C)  
2 —°F (-1°C)  
1 —°F (-.5°C)  
0
°F (0. °C) — (no difference in displayed temperature  
and actual room temperature )  
1
2
3
°F (.5°C)  
°F (1°C  
°F (1.5°C)  
0710  
Reset Thermostat  
0—no thermostat reset.  
Only calendar settings  
1
resets all Installer Setup Options to default values and and time are retained.  
resets schedule to default setting.  
19  
68-0280—01  
href="
VisionPROTM 8000 Touchscreen Programmable Thermostat  
INSTALLER SYSTEM TEST  
Use the Installer System Test to test the heating, cooling and  
fan (and emergency heat for heat pump systems).  
SYSTEM TEST  
NUMBER  
SYSTEM STATUS  
NUMBER  
UP ARROW  
TURNS THE  
SYSTEM ON  
CAUTION  
Equipment Damage Hazard.  
Minimum compressor off time is bypassed during  
Installer System Test  
Avoid cycling compressor quickly.  
How to Use the Installer System Test  
The Installer Test is part of the Installer Setup Menu.  
DONE  
1.  
2.  
3.  
Enter the Installer System Test by entering the Installer  
Setup.  
Note that the test appears at the end of the Installer  
Setup Numbers.  
See Fig. 30 to review how the thermostat buttons are  
used during the Installer System Test. See Table 6 for  
available Installer System Tests.  
DONE KEY  
EXITS INSTALLER ADVANCES TO  
SYSTEM TEST  
NEXT SYSTEM  
TEST NUMBER  
UP ARROW KEY  
DOWN ARROW  
TURNS THE  
SYSTEM OFF  
M22428  
Fig. 30. Review thermostat buttons used during Installer  
System Test.  
Installer System Tests  
IMPORTANT  
Use the Installer System Test to test the heating, cooling, fan and emergency heat. The setting you choose for System  
Type (Installer Setup Number 0170) may prevent some System Test Numbers from appearing.  
Table 4. Installer System Test.  
System Test Number  
Test 1  
Test Type  
System Status Number and Description  
Cooling System Test  
1—Cool stage 1 turns on.  
—Cool stage 1 and stage 2 turn on.  
—Cool is off.  
2
0
Test 2  
Test 3  
Fan System Test  
1—Fan turns on.  
—Fan turns off.  
0
Heating System Test  
1—Heat stage 1 turns on.  
—Heat stage 1 and stage 2 (aux heat) turn  
on.  
2
0—Heat is off.  
Test 4  
Emergency Heat Test  
1—Emergency heat turns on.  
2—Emergency heat and auxiliary heat turn on.  
—Emergency heat turns off.  
0
Press the Next button to go to the beginning of the Installer Setup or press the Done button to exit the Installer  
System Test.  
68-0280—01  
20  
href="
VisionPROTM 8000 Touchscreen Programmable Thermostat  
OPERATION  
System and Fan Settings  
System  
Thermostat Keys  
The System key selections vary based on your heating and/or  
cooling system type.  
SYSTEM  
SELECTS EM.  
HEAT/HEAT/OFF/COOL  
DOWN ARROW  
LOWERS TEMPERATURE  
SETTING  
Heat — Thermostat controls the heating system.  
Off — Both heating and cooling systems are off.  
Cool — Thermostat controls the cooling system.  
Auto — Thermostat automatically changes between heating  
and cooling operation, depending on indoor temperature.  
Em. Heat — Emergency heat cycles to maintain temperature.  
Compressor is locked out (used only for 2H/1C or 3H/2C heat  
pump systems) and auxiliary heat turns on as second stage if  
needed.  
FAN  
SELECTS  
ON/AUTO/CIRC  
UP ARROW  
RAISES  
TEMPERATURE  
SETTING  
TUE  
FAN  
Inside  
Set To  
AUTO  
Following  
Schedule  
Fan  
SYSTEM  
The Fan key selections vary based on the heating and/or  
cooling system type.  
HEAT  
AM  
On — Fan runs continuously. Use this setting for improved air  
circulation or for more efficient central air cleaning.  
Auto — fan follows the fan program schedule.  
Circ — fan runs randomly approximately 35% of the time.  
Use this setting for improved air circulation or for more  
efficient central air cleaning when you do not want the fan  
running continuously.  
SCHED  
HOLD  
CLOCK SCREEN MORE  
SCHED  
CLOCK  
SETS THE  
TIME  
FORWARD  
OR BACK  
MORE  
ENTERS  
SCHEDULING  
MODE  
SHOWS ADDITIONAL  
ACCESSORY AND  
MAINTENANCE  
OPTIONS  
HOLD  
SCREEN  
SETS A PERMANENT  
HOLD AND ACTIVITIES  
VACATION HOLD  
LOCKS OUT THE  
SCREEN TO ALLOW  
FOR CLEANING  
User Setup  
M22444  
Follow these steps to enter the User Setup:  
1.  
Press and release the System key.  
Thermostat Display  
TUE  
SHOWS CURRENT DAY  
OF THE WEEK  
INSIDE TEMPERATURE  
SHOWS THE CURRENT INSIDE  
TEMPERATURE  
THU  
FAN  
SHOWS FAN  
SETTING  
SET TO  
TEMPERATURE  
SHOWS THE  
FAN  
ON  
Inside  
Set To  
AUTO  
CURRENT SET  
TEMPERATURE  
Following  
Schedule  
SYSTEM  
EM HEAT  
TUE  
OFF  
A
M
COOL  
FAN  
SCHED HOLD CLOCK SCREE  
Inside  
Set To  
AUTO  
Following  
Schedule  
SYSTEM  
HEAT  
M22426A  
AM  
SCHED  
HOLD  
CLOCK SCREEN MORE  
SYSTEM  
SHOWS  
CURRENT  
SYSTEM  
POSITION  
TIME  
FOLLOWING  
SCHEDULE  
SHOWS THE  
THERMOSTAT IS  
FOLLOWING THE  
PROGRAMMED  
SCHEDULE  
DISPLAY CURRENT  
TIME OF DAY, HOLD  
TIME REMAINING OR  
NUMBER OF VACATION  
DAYS REMAINING  
M22239  
21  
68-0280—01  
href="
VisionPROTM 8000 Touchscreen Programmable Thermostat  
2.  
Press and hold the center blank key for approximately  
five seconds until the screen changes.  
4. See the screen below to review how the thermostat  
keys are used during the User Setup. See Table 5 for  
the User Setup numbers and settings.  
ADVANCE TO NEXT  
USER SETUP  
USER SETUP  
CURRENT  
SETTING  
NUMBER  
TUE  
CHANGE FILTER UV LAMP HUMIDIFIER PAD  
Inside  
Set To  
Following  
Schedule  
SYSTEM  
MON  
WED  
THU  
FRI  
SAT  
SUN  
EM HEAT  
OFF  
COOL  
PM  
DONE  
CANCEL  
DONE  
M22439  
3.  
Release the center blank key when the screen on the  
thermostat matches the screen below.  
PRESS TO EXIT  
USER SETUP  
CHANGE THE  
CURRENT  
SETTING  
M19922  
5.  
Press the Done key to exit the User Setup screen.  
Table 5. User Setup Settings.  
User  
Setup  
Number  
User Setup  
Name  
Settings  
0120  
Date (first two  
digits of year)  
Select first two digits of  
current calendar year (20  
for year 2005, etc)  
DONE  
0130  
Date (last two  
digits of year)  
Select last two digits of  
current calendar year (05  
for year 2005, etc)  
M22440  
0140  
0150  
0160  
Date (month)  
Date (day)  
Select number of current  
calendar month (1-12)  
Select number of current  
calendar date (1-31)  
Schedule options  
0—Non-programmable  
4—7-day programmable  
(factory setting)  
0
320  
330  
Display  
temperature  
in °F or °C  
0—°F setting (factory  
setting)  
1—°C setting  
0
Daylight savings  
time  
1—Daylight savings is on  
(factory setting)  
0—Daylight savings is off  
68-0280—01  
22  
href="
VisionPROTM 8000 Touchscreen Programmable Thermostat  
Table 5. User Setup Settings.  
User Setup  
PROGRAMMING  
User  
Setup  
Number  
Preprogrammed Energy-saving Settings  
Name  
Settings  
Table 6 shows default program settings.  
0500  
Furnace air filter  
0—off (factory setting)  
1
—10 fan run time days  
about one month)  
—30 fan run time days  
about three months)  
—60 fan run time days  
about six months)  
—90 fan run time days  
about nine months)  
—120 fan run time days  
about one year)  
—365 fan run time days  
about three years)  
(
2
(
3
(
4
(
5
Table 6. Energy-saving Default Program Settings.  
Setpoints  
Schedule  
Period  
Fan  
Setting  
Time  
Heat  
Cool  
Wake  
Leave  
Return  
Sleep  
6:00AM  
°
78°F  
Auto  
Auto  
Auto  
Auto  
70 F  
(
6
(
°
°
(
21 C)  
(25.5 C)  
8:00AM  
6:00PM  
10:00PM  
2°F  
°
85°F  
6
0
(
16.5 C)  
(29.5 C)  
0510  
Humidifier pad  
reminder  
0—off  
1—3 months  
°
78°F  
2
—6 months  
70 F  
°
°
3—12 months  
(21 C)  
(25.5 C)  
0
520  
540  
UV lamp reminder 0—off (factory setting)  
—1 year  
2°F  
°
6
82 F  
1
°
°
(
16.5 C)  
(28 C)  
0
Number of  
2—two (Wake and Sleep)  
4—four (Wake, Leave,  
Return, Sleep)—factory  
setting  
schedule periods  
available  
Program Heating and Cooling Schedule  
Your thermostat can control up to four different schedule  
periods per day:  
Wake—Period when you awaken and want your home at a  
comfortable temperature.  
Leave—Period when you are away from home and want an  
energy-saving temperature.  
Return—Period when you return home and want your home  
back to a comfortable temperature.  
Sleep—Period when you are asleep and want an energy-  
saving temperature.  
0
640  
670  
Clock format  
12—12-hour clock  
(
2
factory setting)  
4—24-hour clock  
0
Screen lockout  
0—all keys available;  
screen is unlocked  
(
1
factory setting)  
—screen is partially  
locked. All key functions  
locked except Temper-  
ature Up and Down keys  
and Cancel key.  
NOTE: Schedule times are in 15-minute intervals.  
2—screen is fully locked  
23  
68-0280—01  
href="
VisionPROTM 8000 Touchscreen Programmable Thermostat  
NOTE: The Fan setting can be programmed for On, Auto, or  
Circ for each period selected. See Fan Schedule  
section for more information.  
Edit Schedule  
1.  
Press Sched key.  
6
7
8
.
.
.
Press Leave key and repeat step 5.  
Press Return key and repeat step 5.  
Press Sleep key and repeat step 5.  
FRI  
FAN  
Inside  
Set To  
9. When complete, press Done key. “Saving Changes”  
appears on the screen to indicate changes are being  
saved to the day(s) modified.  
AUTO  
Following  
Schedule  
SYSTEM  
HEAT  
MON  
TUE  
WED  
THU  
FRI  
AM  
PM  
SCHED  
HOLD  
CLOCK SCREEN  
SAVING  
CHANGES  
M22445  
2.  
Press Edit key.  
MON  
TUE  
WED  
THU  
FRI  
SAT  
SUN  
M19956  
OK TO PICK MULTIPLE DAYS SCREEN LOCKED  
FAN  
Inside  
Set To  
HEAT  
NOTE: To set a Program Schedule for the remaining days of  
the week, repeat steps 1-9. Example: If Mon - Fri  
was selected first, go back and repeat steps 1-9 for  
Sat and Sun.  
AUTO  
CANCEL  
PERIOD  
Following  
Schedule  
SYSTEM  
EM HEAT  
HEAT  
OFF  
AM  
PM  
10. To exit schedule without saving changes, press Cancel  
COOL  
COOL  
key any time.  
AUTO  
SCHED  
EDIT  
H OO LL DD  
WAKE  
CLOCK SCREEN  
LEAVE RETURN SLEEP CANCEL  
DONE  
Cancel a Schedule Period  
M22553  
1.  
2.  
3.  
4.  
Press Sched key.  
Press Edit key.  
Select the Day(s) of the week desired.  
Press schedule period you want to cancel (Wake,  
Leave, Return or Sleep). Once selected, the period  
flashes.  
3.  
It is OK to pick multiple days. Select any combination of  
days to edit. These days are scheduled with the same  
times and temperatures. Check marks appear next to  
days selected.  
5.  
Press Cancel Period key.  
MON  
TUE  
WED  
THU  
FRI  
SAT  
SUN  
OK TO PICK MULTIPLE DAYS SCREEN LOCKED  
MON  
TUE  
WED  
THU  
FRI  
SAT  
SUN  
FAN  
Inside  
Set To  
OK TO PICK MULTIPLE DAYS  
HEAT  
AUTO  
FAN  
ON  
HEAT  
AUTO  
CIRC  
CANCEL  
PERIOD  
Following  
Schedule  
SYSTEM  
EM HEAT  
HEAT  
CANCEL  
PERIOD  
OFF  
AM  
PM  
COOL  
COOL  
AUTO  
AM  
COOL  
SCH EE DD  
H OO LL DD  
WAKE  
CLOCK SCREEN  
LEAVE RETURN SLEEP CANCEL  
DONE  
M22446  
DONE  
WAKE  
LEAVE RETURN SLEEP CANCEL  
M19955  
6.  
The time, temperature(s) and fan setting disappear. The  
bar above the selected period is removed, indicating the  
scheduled period was cancelled.  
4
.
.
Press Wake key. Once pressed, Wake flashes to show it  
is selected.  
Press Up and Down keys to modify time and heat and  
5
cool temperatures from this screen.  
68-0280—01  
24  
href="
VisionPROTM 8000 Touchscreen Programmable Thermostat  
NOTE: To reinstate a schedule period, press arrow keys to  
set desired time and temperatures.  
Fan Control (Table 7)  
If the Fan program is scheduled, Auto is shown and any  
programmable mode that is set; for example, if during Wake  
period, Fan is set to Auto, only Auto is shown in the Fan area.  
However, if during the Wake period, fan is scheduled to On,  
both Auto and On are shown. Auto indicates fan is running its  
schedule; On indicates Fan schedule is set to On.  
MON  
TUE  
WED  
THU  
FRI  
SAT  
SUN  
OK TO PICK MULTIPLE DAYS  
FAN  
HEAT  
THU  
FAN  
ON  
Inside  
Set To  
AUTO  
COOL  
Following  
Schedule  
SYSTEM  
DONE  
WAKE  
LEAVE RETURN SLEEP CANCEL  
M19957  
HEAT  
AM  
7.  
Press Done key.  
SCHED  
HOLD  
CLOCK SCREEN  
Fan Schedule  
M19962  
Press Fan key while in the Scheduling Screen to program the  
System Fan. Choices available from the Scheduling Screen:  
Auto (default position)—fan runs with equipment.  
Programmable for all schedule periods (Wake, Leave, Return  
and Sleep).  
On—fan runs continuously (programmable for all schedule  
periods).  
Table 7. Fan Program Operation and Screen Status.  
Fan  
Fan  
Call  
for  
Status  
shownon  
Screen  
Fan  
Program  
Schedule  
Energize  
Terminal  
Circ—fan runs randomly for approximately 35% of schedule  
period (programmable for all schedule periods).  
Setting  
Action  
Auto  
Auto  
Auto  
Auto  
Auto  
On  
None  
Fan  
None  
G
Auto  
Auto/On  
Auto/Circ  
Auto/Circ  
MON  
TUE  
WED  
THU  
FRI  
SAT  
SUN  
OK TO PICK MULTIPLE DAYS SCREEN LOCKED  
FAN  
Circ  
Circ  
None  
Fan  
None  
G
Inside  
Set To  
HEAT  
AUTO  
CANCEL  
PERIOD  
Following  
Schedule  
SYSTEM  
EM HEAT  
HEAT  
OFF  
AM  
PM  
COOL  
COOL  
AUTO  
SCH EE DD  
H OO LL DD  
WAKE  
CLOCK SCREEN  
LEAVE RETURN SLEEP CANCEL  
DONE  
M22447  
25  
68-0280—01  
href="
VisionPROTM 8000 Touchscreen Programmable Thermostat  
Manual Override of Fan Schedule (Table 8)  
Operate VisionPRO™ 8000 Touchscreen  
Set Time  
Auto—fan is automatically following the Fan schedule  
(
choices are Auto, On or Circulate).  
On—overrides Fan schedule. Fan is continuously On.  
Circ—overrides Fan schedule. Fan circulates randomly for  
approximately 35% of time until the Auto position is selected.  
1.  
.
Press Clock.  
2
Use arrows to set current time.  
TUE  
Table 8. Manual Override of Fan Schedule Operation.  
Screen  
Fan  
Message  
Under  
Fan  
Schedule  
Override  
Setting  
Call  
for  
Action  
Fan  
Setting  
Energize  
Terminal  
Setting  
AM  
Auto  
Auto  
Auto  
On  
On  
Fan  
None  
Fan  
G
On  
Circ  
Circ  
Autoa  
None  
G
Circ  
Circ  
DONE  
CANCEL  
M19958  
3.  
Press Done key.  
On  
Circ  
None  
None  
Circ  
IMPORTANT  
The current day of the week should already be set  
correctly. If not, see Installer Setup to set the day.  
On  
Circ  
Fan  
G
Circ  
Autoa  
Circ  
Set Temperature Overrides  
The thermostat has three temperature override options: Hold  
Temperature Until, Permanent Hold and Vacation Hold.  
Circ  
On  
Fan  
G
On  
aAuto Override resumes the Fan Program in each schedule  
period (Wake, Leave, Return and Sleep)  
HOLD TEMPERATURE UNTIL (TEMPORARY HOLD)  
Holds temperature temporarily until the next scheduled period  
time or until the time the user sets.  
1.  
Press Up or Down arrow next to the temperature you  
want to adjust. “Hold Temperature Until” time appears  
on the screen. The Hold Temperature Until time defaults  
to the start time of the next scheduled period.  
NOTE: The Time Up and Down arrows are shown for  
approximately seven seconds. Pressing on the  
screen time (where the Hold Temperature Until time  
is shown) allows the arrows to reappear.  
68-0280—01  
26  
href="
VisionPROTM 8000 Touchscreen Programmable Thermostat  
2.  
Press Up or Down arrow next to the Time key to set  
desired time for the thermostat to resume schedule.  
3. Press Up and Down arrow keys to change the number  
of Days you desire thermostat to override the schedule.  
NOTE: Days Up and Down arrows appear for approximately  
seven seconds. Pressing just below Hold Temper-  
ature Until on the screen allows the Days Up and  
Down arrows to reappear.  
TUE  
FAN  
Inside  
Set To  
AUTO  
SYSTEM  
THU  
Hold Temperature  
Until  
HEAT  
FAN  
Inside  
Set To  
PM  
AUTO  
SCHED  
HOLD  
CLOCK SCREEN  
SYSTEM  
CANCEL  
M19959  
Hold Temperature  
Until  
HEAT  
DAYS  
3.  
Press the Cancel or Sched key to cancel “Hold  
Temperature Until” and resume schedule.  
SCHED  
CLOCK SCREEN  
CANCEL  
M19961  
NOTE: Once “Hold Temperature Until” time is reached, the  
thermostat shows “Following Schedule” on the  
screen to indicate that “Temporary Hold” has ended.  
4.  
To cancel the Vacation Hold override early, press the  
Cancel key.  
PERMANENT HOLD  
Permanent Hold changes the temperature setting until  
Permanent Hold is cancelled.  
NOTE: When the number of days of Vacation Hold expires,  
the screen shows “Following Schedule” to indicate  
that Vacation Hold has ended.  
1
.
.
Press Hold key. “Permanent Hold” appears on the  
screen.  
2
Press Up or Down arrow next to the temperature you  
want to set during “Hold.”  
Clean Thermostat Screen  
The thermostat has a touch screen interaction. Follow these  
steps to clean the screen without making thermostat changes:  
1.  
Press the Screen key. Thermostat locks out all touch  
keys for 30 seconds to allow for cleaning.  
TUE  
FAN  
Inside  
Set To  
AUTO  
SYSTEM  
OK TO  
CLEAN  
SCREEN  
HEAT  
AM  
Permanent  
Hold  
SCHED HOLD  
CLOCK SCREEN  
CANCEL  
M19960  
M19964  
3.  
Press Cancel key to cancel “Permanent Hold” and  
resume the schedule.  
2
.
.
Use damp cloth slightly moistened with water or house-  
hold glass cleaner to clean the screen.  
Repeat the above steps, as necessary.  
VACATION HOLD  
3
Changes temperature setting for a designated number of  
days.  
IMPORTANT  
Do not spray any type of liquid directly on the  
1.  
Press the Up and Down arrow keys to set the desired  
temperature while away on vacation. Notice that “Hold  
Temperature Until” time is shown on the screen. (This is  
the time the Vacation Hold override expires after the  
number of days ends.)  
thermostat itself. If using household glass cleaner,  
spray cleaner on cloth. Then use a cloth to clean  
the thermostat screen.  
2.  
Press Hold key twice. Screen shows “Hold Temperature  
Until” one day.  
4.  
Press the Done key to return to the Home Screen and  
normal operation.  
27  
68-0280—01  
href="
VisionPROTM 8000 Touchscreen Programmable Thermostat  
4.  
Align the screw blocks with the pins on the back of the  
thermostat.  
Replace Batteries  
1.  
When the LO Battery indicator is flashing, replace the  
batteries promptly with three fresh AAA alkaline  
batteries  
WALLPLATE  
PINS ON  
BACK OF  
THERMOSTAT  
TERMINAL  
SCREW  
BLOCK  
M19963  
2.  
Remove thermostat from the wallplate by pulling  
straight out.  
WALL  
M22213  
5.  
Push the thermostat straight onto the wallplate until it  
snaps into place.  
Battery Tips  
1.  
2.  
3.  
Replace the batteries as soon as LO Batt flashes in the  
display. The LO Battery indicator flashes in the display  
one month before the batteries run down completely.  
Always use fresh AAA alkaline batteries. Non-alkaline  
batteries do not last as long and can leak, causing  
thermostat damage.  
Although the thermostat has a Low Battery indicator,  
replace the batteries once a year to prevent the thermo-  
stat and heating/cooling system from shutting down due  
to lack of battery power.  
M22430  
3.  
Remove the old batteries and insert three fresh AAA  
alkaline batteries, as marked on the thermostat.  
Screen Locks  
TUE  
BACK OF THERMOSTAT  
SCREEN LOCKED  
Set To  
FAN  
Inside  
AUTO  
Following  
Schedule  
SYSTEM  
HEAT  
+
+
PM  
SCHED  
HOLD  
CLOCK SCREEN MORE  
BATTERIES  
3)  
M19965  
(
M22212  
68-0280—01  
28  
href="
VisionPROTM 8000 Touchscreen Programmable Thermostat  
Partially Locked Screen  
Remote Indoor Temperature  
When partially locked, the screen indicates Screen Locked for  
If a remote indoor temperature sensor is installed, the  
thermostat displays the inside temperature on the screen from  
the remote sensor(s).The thermostat internal temperature  
sensor is not used.  
5
to 7 seconds whenever the user attempts to press a key that  
is locked. Pressing a locked key, while Screen Locked is  
shown, flashes “Screen Locked” on the screen.  
In this mode, all keys are locked except the Temperature Up  
and Down arrow keys:  
MON  
TUE  
WED  
THU  
FRI  
SAT  
SUN  
User can change temperature up or down but cannot  
change schedule settings.  
Temporary temperature change lasts until next scheduled  
period and that time shows on screen.  
To cancel temperature override and begin following  
schedule, press Cancel key.  
To unlock screen, see Installer Setup section.  
FAN  
Inside  
Set To  
AUTO  
Heat On  
Following  
Schedule  
SYSTEM  
HEAT  
AM  
Fully Locked Screen  
In this mode, all keys are locked and not functional. To unlock  
screen, see Installer Setup section. The screen continuously  
displays “Screen Locked.”  
SCHED  
HOLD  
CLOCK SCREEN MORE  
M19974  
ONE REMOTE INDOOR SENSOR INSTALLED (OPTIONAL)  
If one remote indoor temperature sensor is used, the screen  
showing the Inside temperature reading shows the  
temperature at the indoor remote sensor location. The  
thermostat internal temperature sensor is not used.  
Outdoor Temperature  
If an outdoor temperature sensor is installed, the thermostat  
displays the outside temperature in the lower right corner of  
the Home Screen.  
MULTIPLE REMOTE INDOOR SENSORS INSTALLED (OPTIONAL)  
If more than one remote indoor sensor is used, the screen  
showing Inside temperature reading shows the average of all  
the remote indoor sensors. The thermostat internal  
temperature sensor is not used.  
MON  
TUE  
WED  
THU  
FRI  
SAT  
SUN  
FAN  
Inside  
Set To  
AUTO  
Indoor Air Quality Reminders  
Following  
Schedule  
SYSTEM  
HEAT  
Outside  
Filter Change Reminder  
AM  
The filter change reminder must be turned on from the  
Installer Setup. Once expired, the screen flashes, “Change  
Filter” and a Reset key appears. Press the Reset key to reset  
the change reminder.  
SCHED  
HOLD  
CLOCK SCREEN MORE  
M22453  
If thermostat is set to Auto Changeover System mode, press  
the More key until the outside temperature is shown on the  
screen.  
MON  
TUE  
WED  
THU  
FRI  
SAT  
SUN  
OK TO PICK MULTIPLE DAYS SCREEN LOCKED  
FAN CHANGE FILTER UV LAMP HUMIDIFIER PAD  
Inside  
Set To  
AUTO  
MON  
TUE  
WED  
THU  
FRI  
SAT  
SUN  
Following  
Schedule  
SYSTEM  
RESET  
HEAT  
PM  
SCHED  
HOLD  
CLOCK SCREEN MORE  
Outside  
M19975  
SC HH EE DD  
H OO LL DD  
WAKE  
CLOCK SCREEN  
LEAVE RETURN SLEEP CANCEL  
NOTE: The days are counted as fan run time, so anytime  
the fan is running, the reminder is counting that time  
against the number of days selected.  
DONE  
M22448  
29  
68-0280—01  
href="
VisionPROTM 8000 Touchscreen Programmable Thermostat  
The remaining run time days can be viewed by pressing the  
More key; the remaining days can be edited using the More  
key or from the Installer Setup. To view or reset the reminder  
before it expires, follow these steps using the More key:  
4. Press the Done key to go back to the viewing screen.  
MON  
TUE  
WED  
THU  
FRI  
SAT  
SUN  
1.  
Press the More key until the filter reminder appears on  
the screen. This is the number of fan run-time days  
remaining on the filter reminder.  
CHANGE FILTER UV LAMP HUMIDIFIER PAD  
RESET  
MON  
TUE  
WED  
THU  
FRI  
SAT  
SUN  
CHANGE FILTER UV LAMP HUMIDIFIER PAD  
DAYS  
SCH EE DD  
EDIT  
H OO LL DD  
WAKE  
CLOCK SCREEN MORE  
LEAVE RETURN SLEEP CANCEL  
DONE  
RESET  
M22449  
DAYS  
5. Press the Reset key to activate the new number of days  
selected in the previous screen.  
SCHED  
EDIT  
H OO LL DD  
WAKE  
CLOCK SCREEN MORE  
LEAVE RETURN SLEEP CANCEL  
DONE  
MON  
TUE  
WED  
THU  
FRI  
SAT  
SUN  
M22449  
CHANGE FILTER UV LAMP HUMIDIFIER PAD  
2
3
.
.
Press the Edit key.  
Use the Up and Down keys to change the number of  
run-time days.  
RESET  
MON  
TUE  
WED  
THU  
FRI  
SAT  
SUN  
DAYS  
CHANGE FILTER UV LAMP HUMIDIFIER PAD  
SCH EE DD  
EDIT  
H OO LL DD  
WAKE  
CLOCK SCREEN MORE  
LEAVE RETURN SLEEP CANCEL  
DONE  
M22451  
6.  
Press the Done key to return to the Home screen.  
DAYS  
SCHED  
H OO LL DD  
WAKE  
CLOCK SCREEN  
LEAVE RETURN SLEEP CANCEL  
DONE  
M22450  
68-0280—01  
30  
href="
VisionPROTM 8000 Touchscreen Programmable Thermostat  
The thermostat alerts that the heating or cooling system is  
coming on before a scheduled time by showing “Recovery” on  
the screen.  
Humidifier Pad Reminder  
The Humidifier Pad change reminder must be turned on from  
the Installer Setup. Once expired, the screen flashes,  
Change Humidifier Pad” and a Reset key appears. Press the  
Reset key to reset the change reminder.  
The remaining calendar days can be viewed by pressing the  
More key. The remaining days can be edited using the More  
key or from the Installer Setup. To view or reset the reminder  
before it expires, follow these steps using the More key:  
TUE  
FAN  
Inside  
Set To  
AUTO  
1
.
Press the More key until the Humidifier Pad change  
reminder appears on the screen. This is the number of  
calendar days remaining on the Humidifier Pad  
reminder.  
Press the Edit key.  
Use the Up and Down keys to change the number of  
calendar days.  
Following  
Schedule  
Recovery  
SYSTEM  
HEAT  
PM  
2.  
.
3
SCHED  
HOLD  
CLOCK SCREEN MORE  
4
5
.
.
Press the Done key to go back to the viewing screen.  
Press the Reset key to activate the new number of days  
selected in the previous screen.  
M22301  
6
.
Press the Done key to return to the Home Screen.  
NOTE: It takes about a week for the thermostat to adjust to  
local weather, the schedule, the construction of the  
home and the heating and/or cooling system. Each  
day it adjusts the next day’s recovery start time  
accordingly.  
UV Lamp Reminder  
The UV Lamp change reminder must be turned on from the  
Installer Setup. Once expired, the screen flashes, “Change  
UV Lamp” and a Reset key appears. Press the Reset key to  
reset the change reminder.  
P+I Control  
The remaining calendar days can be viewed by pressing the  
More key. The remaining days can be edited using the More  
key or from the Installer Setup. To view or reset the reminder  
before it expires, follow these steps using the More key:  
The thermostat microprocessor-based control requires that  
the user understands temperature control and thermostat  
performance. A conventional mechanical or electronic  
thermostat does not control temperature precisely at setpoint.  
Typically there is an offset (droop) in the control point as the  
system load changes. This is a phenomenon that most people  
in the industry know and accept. Many factors contribute to  
offset including switch differential, thermal lag, overshoot,  
cycle rates and system load.  
1
.
Press the More key until the UV Lamp change reminder  
appears on the screen. This is the number of calendar  
days remaining on the UV Lamp reminder.  
Press the Edit key.  
Use the Up and Down keys to change the number of  
calendar days.  
2.  
.
3
The thermostat microprocessor simultaneously gathers,  
compares and computes data. Using this data, it controls a  
wide variety of functions. The special proprietary algorithm  
4
5
.
.
Press the Done key to go back to the viewing screen.  
Press the Reset key to activate the new number of days  
selected in the previous screen.  
(
program) in the thermostat eliminates the factors causing  
6.  
Press the Done key to return to the Home Screen.  
offset. This makes temperature control more accurate than  
the conventional mechanical or electronic thermostats. The  
temperature control algorithm is called proportional plus  
integral (P+I) control.  
Temperature Recovery  
The thermostat feature, Adaptive Intelligent Recovery™,  
eliminates all guesswork when setting the thermostat  
schedule.  
The thermostat sensor, located on the thermostat or remote,  
senses the current space temperature. The proportional error  
is calculated by comparing the sensed temperature to the  
programmed setpoint. The deviation from the setpoint is the  
proportional error.  
Simply set the program schedule to the time that the comfort  
temperature is desired. The thermostat then turns on the  
heating or cooling at just the right time to have the home  
reach the scheduled temperature at the scheduled time.  
The thermostat also determines integral error, which is a  
deviation based on the length of error time. The sum of the  
two errors is the (P+I) error. The cycle rate used to reach and  
maintain the setpoint temperature is computed using the P+I.  
The additon of the integral error is what differentiates the  
thermostat from many other electronic and mechanical  
thermostats. See Fig. 31.  
For example—get up at 6:00 AM and want the temperature to  
be 70°F. Set the Wake period for 6:00 AM and 70°F. The  
thermostat then turns on the heat before 6:00 AM to raise the  
temperature to 70°F by 6:00 AM.  
31  
68-0280—01  
href="
VisionPROTM 8000 Touchscreen Programmable Thermostat  
Inside Humidity Level  
Select models can sense the humidity level in the home. The  
humidity level in the home is shown in the lower right corner of  
the Home Screen.  
THERMOSTAT  
COOL SETPOINT  
PROPORTIONAL COOL  
CONTROL POINT  
P+I CONTROL  
POINT  
TUE  
P+I CONTROL POINT  
FAN  
Inside  
Set To  
PROPORTIONAL HEAT  
CONTROL POINT  
AUTO  
THERMOSTAT  
HEAT SETPOINT  
Following  
Schedule  
SYSTEM  
HEATING  
50  
COOLING  
50  
HEAT  
1
00  
0
100  
PM  
PERCENT LOAD  
Humidity  
M4414  
SCHED  
HOLD  
CLOCK SCREEN MORE  
Fig. 31. Proportional temperature control versus P+ I  
temperature control.  
M19966  
Minimum Off-Timer  
If thermostat is set to Auto Changeover System mode, press  
the More key until the humidity level is shown on the screen.  
The Thermostat has built-in compressor protection (minimum-  
off timer) that prevents the compressor from restarting too  
early after a shutdown.  
The minimum-off timer is activated after the compressor turns  
off.  
MON  
TUE  
WED  
THU  
FRI  
SAT  
SUN  
If there is a call during the minimum-off timer, the thermostat  
shows “Wait” in the display.  
Inside  
TUE  
WED  
FAN  
Inside  
Set To  
AUTO  
SCH EE DD  
H OO LL DD  
WAKE  
CLOCK SCREEN  
LEAVE RETURN SLEEP CANCEL  
DONE  
WaitCool  
Following  
Schedule  
M22452  
SYSTEM  
HEAT  
AM  
PM  
COOL  
SCHED  
HOLD  
CLOCK SCREEN MORE  
M22244  
When the minimum-off timer expires, “Cool On” or “Heat On”a  
appears solidly in the display and the compressor and fan turn  
on.  
_________  
aHeat Pumps only.  
68-0280—01  
32  
href="
VisionPROTM 8000 Touchscreen Programmable Thermostat  
Control Dehumidification Setting (Select Models)  
Heat Pump Emergency Heat LED Indication  
Select models read the inside humidity level and allow for a  
dehumidification setting:  
(
Requires 24 Vac Common Connection)  
The thermostat uses a red LED indicator that lights when the  
thermostat is in the Emergency Heat mode. The LED is  
located in the upper right corner of the thermostat. It is visible  
only when on. When the thermostat is in the Em. Heat system  
mode, the L terminal is continuously energized and the LED is  
on.  
1.  
Press the More key until the inside humidity percent and  
dehumidification setpoint are shown.  
Inside  
Heat Pump Temperature Lockouts  
Humidity  
Dual Fuel Heat Pump and Outdoor Temperature  
Sensor  
In this operation, there is no external fossil fuel kit (dual fuel  
kit) installed; the thermostat controls this function.  
DEHUMIDIFIER  
DONE  
CANCEL  
M19967  
1. Choose correct heat pump application in Installer Setup  
Number 0170.  
2.  
3.  
4.  
Choose Fossil Fuel Option as the backup heat source  
in Installer Setup Number 0200.  
Choose No External Fossil Fuel Kit Option is control-  
ling back up heat in Installer Setup Number 0210.  
Choose Outdoor Temperature Sensor for Heat Pump  
Temperature Lockouts Option in Installer Setup Num-  
ber 0340.  
2
.
.
Use Up and Down arrow keys, located to the right of the  
dehumidifier setpoint, to set desired humidity level for  
dehumidification in the summer.  
3
Press Done key.  
Dehumidification Droop Control  
5. Choose appropriate Balance Point Temperature in  
Installer Setup Number 0350.  
The dehumidification control attempts to control to the user's  
humidity setpoint by turning on the air conditioner. In  
extremely high humidity conditions, the thermostat keeps the  
air conditioner running (energizing Y and G) for up to 3°F  
below the temperature setpoint. It does this while trying to  
achieve the desired humidity setpoint and balancing that with  
the temperature setpoint. The thermostat controls up to 3° F  
below the temperature setting until either the humidity is  
satisfied or conditions change.  
OPERATION IN HEAT MODE ABOVE BALANCE POINT (OUTDOOR  
TEMPERATURE)  
When the outdoor temperature is above the selected Balance  
Point Temperature (ISU 0350), only the compressor operates  
and the fan (G terminal) energizes when the thermostat calls  
for heat. See Fig. 33.  
Special Heat Pump Operation  
COMPRESSOR ONLY  
BALANCE  
POINT  
Heat Pump LED Indication (Requires 24 Vac  
Common Connection)  
3
0
A red LED indication is located in the upper right corner of the  
thermostat. It is only visible when lighted.  
FOSSIL FUEL ONLY  
M22441  
When the L terminal is wired to an equipment monitor, the  
LED signals when a check or fail signal is sent to the  
thermostat from the system. This is operational in the Heat,  
Off, Cool or Auto positions. See Fig. 32.  
Fig. 33. Dual Fuel Heat Pump Operation in Heat mode with  
Balance Point Set.  
OPERATION IN HEAT MODE BELOW BALANCE POINT (OUTDOOR  
TEMPERATURE)  
When the outdoor temperature is below the selected Balance  
Point Temperature (ISU 0350), only the Fossil Fuel (auxiliary  
heat) operates and the fan (G terminal) does not energize  
when the thermostat calls for heat.  
C
L
TO C  
EQUIPMENT  
MONITOR  
TO R  
M19907  
Fig. 32. L terminal switch to R (power) side of system  
transformer.  
33  
68-0280—01  
href="
VisionPROTM 8000 Touchscreen Programmable Thermostat  
OPERATION IN EMERGENCY HEAT MODE  
The balance point (outside) temperature is not used in the  
Emergency heat mode. When the thermostat is moved to the  
Emergency Heat position, the compressor is locked out. The  
first stage of heat is whatever is connected to the E terminal.  
The second stage of heat is what is connected to the Aux.  
terminal. Often there is only one source of non-compressor  
heat and the E terminal is jumped to the Aux. terminal.  
COMPRESSOR ONLY  
AUXILIARY  
LOCKOUT  
TEMPERATURE  
5
0
BOTH COMPRESSOR AND  
AUXILIARY HEAT  
COMPRESSOR  
LOCKOUT  
TEMPERATURE  
35  
AUXILIARY ONLY  
Heat Pump with Electric Auxiliary (Backup) Heat and  
Outdoor Temperature Sensor  
M19950  
1.  
2.  
3.  
4.  
5.  
Choose correct heat pump application in Installer Setup  
Number 0170.  
Fig. 34. Heat Pump Operation with Lockout  
Temperatures Set.  
Choose Electric as Auxiliary (Backup) Heat Source in  
Installer Setup Number 0200.  
Choose Outdoor Temperature Sensor for  
Control Option in Installer Setup Number 0340.  
Choose Compressor Lockout Temperature in  
Installer Setup Number 0350.  
When the outdoor temperature is between the two  
temperatures, both the Compressor and Auxiliary Heat  
operate.  
Operation in Emergency Heat Mode  
Choose Auxiliary Lockout Temperature in Installer  
Setup Number 0360.  
Once the thermostat is placed into the Emergency Heat  
mode, the compressor and auxiliary lockout features are  
turned off. In the Emergency heat mode, the compressor is  
locked out. The first stage of heat is whatever is connected to  
the E terminal. The second stage of heat is connected to the  
Aux. terminal. Usually the emergency and auxiliary heat  
sources are electric strip heat in these cases.  
NOTE: There is a 5°F deadband between the Compressor  
and Auxiliary Heat Lockout Temperatures.  
Operation in Heat Mode  
When the outdoor temperature is below the Compressor  
Lockout Temperature, only the Auxiliary Heat operates.  
Operating Sequence  
The thermostat energizes specific terminal(s), depending on  
the demand for heating, cooling or fan. The thermostat screen  
shows the time, inside temperature, system and fan  
selections. Additional indicators are shown when the heating,  
cooling or fan is energized. See Tables 9 - 11 for specification  
information.  
When the outdoor temperature is above the Auxiliary Lockout  
Temperature, only the Compressor operates. See Fig. 34.  
Table 9. Sequence of Operation for Conventional Systems.  
System Setting  
Fan Setting  
Auto  
Call for Action  
Energize Terminals  
Screen Message  
None  
Off  
None  
None  
None  
Cool  
Auto  
None  
None  
Y, G  
Cool or Auto  
Cool or Auto  
Auto  
Auto  
Stage 1 Cooling  
Cool On  
Cool On  
Stage 1 and Stage 2 Cooling  
b
Y, Y2 , G  
Heat  
Auto  
Auto  
Auto  
None  
None  
None  
Heat or Auto  
Heat or Auto  
Stage 1 Heating  
Stage 1 and Stage 2 Heating  
W, Ga  
Heat On  
Heat On  
c
a
W, W2 , G  
a
b
c
G energizes only if Installer Setup number 0180 is set to Electric.  
If Installer Setup System type is set to two stages of cooling.  
If Installer Setup System type is set to two stages of heating.  
68-0280—01  
34  
href="
VisionPROTM 8000 Touchscreen Programmable Thermostat  
Table 10. Sequence of Operation for Power Open and Power Closed Valves or Normally Open Valves.  
System Setting  
Fan Setting  
N/A  
Call for Action  
Energize Terminals  
Screen message  
None  
Off  
None  
None  
Heat  
Y
Heat  
Heat  
N/A  
N/A  
Y
None  
W
Heat On  
Table 11. Sequence of Operation for Heat Pump Systems.  
System Setting  
Fan Setting  
Call for Action  
Energize Terminals  
Screen message  
Off  
Auto  
Auto  
Auto  
Auto  
Auto  
Auto  
Auto  
Auto  
Auto  
Auto  
Auto  
None  
None  
O/Ba  
None  
Cool  
O/Ba  
None  
Cool or Auto  
Cool or Auto  
Heat  
Stage 1 Cooling  
Y, G, O/Ba  
Cool On  
Cool On  
None  
Stage 1 and Stage 2 Cooling  
None  
d
a
Y, Y2 , G, O/B  
O/Ba  
Heat or Auto  
Heat or Auto  
Heat or Auto  
Em. Heat  
Em. Heat  
Em. Heat  
Stage 1 Heating  
Y, G, O/Ba  
c
Heat On  
Aux Heat On  
Aux Heat On  
None  
Stage 1 and Stage 2 Heating  
Stage 1, 2 and 3 Heating  
None  
a
Y, AUX , G, O/B  
d
e
a
Y, Y2 , AUX , G, O/B  
Lb, O/Ba  
Stage 1 Heating  
b
a
Heat On  
Aux. Heat On  
E, G, L , O/B  
Stage 1 and Stage 2 Heating  
b
a
E, AUX, G, L , O/B  
a
b
c
Configure O/B in Installer Setup. Based on last piece of equipment called (cooling = O or heating = B).  
Red LED is on. See LED Indication section for more details.  
If Installer Setup System Type is set to 2Heat/1Cool Heat Pump with Auxiliary Heat.  
d
If Installer Setup System Type is set to 3Heat/2Cool Heat Pump with Auxiliary Heat.  
e
This terminal does not energize if Installer Setup System type is set to 2 Heat/2 Cool Heat Pump with no Auxiliary Heat.  
Second Stage Heat and Cool Control  
While maintaining setpoint, several factors affect when 2nd  
stage energizes such as load conditions, environmental  
conditions, P+I control, and home insulation. The second  
stage energizes when the thermostat senses 1st stage is  
running at 90% capacity. This operation is droopless control.  
35  
68-0280—01  
href="
VisionPROTM 8000 Touchscreen Programmable Thermostat  
C7089U Outdoor Temperature Sensor  
Table 12. Sensor Resistance at Outdoor Temperature.  
Outdoor  
Temperature  
Outdoor  
Temperature  
Operation  
Ohms of  
Resis-  
tance  
Ohms of  
Resis-  
tance  
When installed with Thermostat Installer Setup Number 0340  
set to 1 or 2, the outside temperature can be displayed on the  
thermostat. See Fig. 35.  
°
F
°C  
°F  
52  
°C  
-20  
-28.9  
-27.8  
-26.7  
-25.6  
-24.4  
-23.3  
-22.2  
-21.1  
-20.0  
-18.9  
-17.8  
-16.7  
-15.6  
-14.4  
-13.3  
-12.2  
-11.1  
-10.0  
-8.9  
106926  
100923  
95310  
90058  
85124  
80485  
76137  
72060  
68237  
64631  
61246  
58066  
55077  
53358  
49598  
47092  
44732  
42506  
40394  
38400  
36519  
34743  
33063  
31475  
29975  
28558  
27219  
25949  
24749  
23613  
22537  
21516  
20546  
19626  
18754  
17926  
11.1  
12.2  
13.3  
14.4  
15.6  
16.7  
17.8  
18.9  
20.0  
21.1  
22.2  
23.3  
24.4  
25.6  
26.7  
27.8  
28.9  
30.0  
31.1  
32.2  
33.3  
34.4  
35.6  
36.7  
37.8  
38.9  
40.0  
41.1  
42.2  
43.3  
44.4  
45.6  
46.7  
47.8  
48.9  
17136  
16387  
15675  
14999  
14356  
13743  
13161  
12607  
12081  
11578  
11100  
10644  
10210  
9795  
9398  
9020  
8659  
8315  
7986  
7672  
7372  
7086  
6813  
6551  
6301  
6062  
5834  
5614  
5404  
5203  
5010  
4826  
4649  
4479  
4317  
-
-
-
18  
16  
14  
54  
56  
MON  
TUE  
WED  
THU  
FRI  
SAT  
SUN  
58  
FAN  
Inside  
Set To  
-12  
10  
-8  
60  
AUTO  
-
62  
Following  
Schedule  
SYSTEM  
64  
HEAT  
Outside  
-
6
4
66  
AM  
-
68  
SCHED  
HOLD  
CLOCK SCREEN MORE  
-2  
0
2
4
6
8
70  
72  
M22453  
74  
76  
Fig. 35. Outside temperature reading on  
TH8000 Series Thermostat.  
78  
80  
The C7089 Outdoor Sensor converts outdoor ambient  
temperature to a resistance that the thermostat can interpret.  
1
1
1
0
2
4
82  
84  
The C7089 has a negative temperature coefficient (TC), which  
means that resistance decreases as the temperature  
increases. See Table 12.  
86  
16  
88  
1
8
-7.8  
90  
Checkout  
2
0
-6.7  
92  
Allow C7089U Outdoor Sensor to absorb outdoor air for a  
minimum of twenty minutes before taking a reading.  
2
2
2
2
3
3
2
4
6
8
0
2
-5.6  
94  
-4.4  
96  
With an accurate thermometer (±1°F [0.5°C]) measure the  
temperature at the sensor location, allowing time for the  
thermometer to stabilize before reading.  
-3.3  
98  
-2.2  
100  
102  
104  
106  
108  
110  
112  
114  
116  
118  
120  
-1.1  
To verify sensor resistance, remove one wire from one of the  
C7089 60-in. leadwires. Use an ohmmeter to measure the  
resistance across the sensor. Then verify the sensor accuracy  
with the temperature/resistance in Table 12.  
0.0  
34  
1.1  
3
3
4
6
8
0
2.2  
3.3  
Calibration  
4.4  
The C7089 Outdoor Sensor is calibrated at the factory and  
cannot be recalibrated in the field.  
42  
5.6  
4
4
4
5
4
6
8
0
6.7  
7.8  
8.9  
10.0  
68-0280—01  
36  
href="
VisionPROTM 8000 Touchscreen Programmable Thermostat  
To verify sensor resistance, remove one wire from one of  
C7189 wiring terminals. Use an ohmmeter to measure the  
resistance across the sensor. Then verify the sensor accuracy  
with the temperature/resistance in Table 13.  
C7189U Remote Indoor Temperature Sensor  
Operation  
When installed with Thermostat Installer Setup Number 0340  
set to 3, the remote inside temperature is displayed on the  
Thermostat Home Screen as Inside Temperature. The  
thermostat internal temperature sensor is not used. See Fig.  
Calibration  
The C7189 Wall Mount Temperature Sensor is calibrated at  
the factory and cannot be recalibrated in the field.  
36.  
Table 13. Sensor Resistance at Room Temperature.  
MON  
TUE  
WED  
THU  
FRI  
SAT  
SUN  
FAN  
Room  
Temperature  
Ohms  
of  
Room  
Temperature  
Ohms  
of  
Inside  
Set To  
AUTO  
Heat On  
Resis-  
tance  
Resis-  
tance  
Following  
Schedule  
°F  
°C  
°F  
°C  
SYSTEM  
HEAT  
40  
4.4  
22537  
21516  
20546  
19626  
18754  
17926  
17136  
16387  
15675  
14999  
14356  
13743  
13161  
12607  
12081  
11578  
72  
74  
76  
78  
80  
82  
84  
86  
88  
90  
92  
94  
96  
98  
100  
22.2  
23.3  
24.4  
25.6  
26.7  
27.8  
28.9  
30.0  
31.1  
32.2  
33.3  
34.4  
35.6  
36.7  
37.8  
11100  
10644  
10210  
9795  
9398  
9020  
8659  
8315  
7986  
7672  
7372  
7086  
6813  
6551  
6301  
AM  
4
2
4
5.6  
SCHED  
HOLD  
CLOCK SCREEN MORE  
4
6.7  
M19974  
46  
7.8  
48  
8.9  
Fig. 36. Inside temperature reading on  
TH8000 Series Thermostat.  
50  
52  
10.0  
11.1  
12.2  
13.3  
14.4  
15.6  
16.7  
17.8  
18.9  
20.0  
21.1  
The C7189 Wall Mount Temperature Sensor converts room  
temperature to a resistance that the thermostat can interpret.  
54  
The C7189 has a negative temperature coefficient (NTC),  
which means that resistance decreases as the temperature  
increases. See Table 13.  
56  
58  
60  
62  
The C7189 can be used to provide one remote sensor input  
see Fig. 28) or as a temperature averaging network with  
multiple C7189 Sensors connected, as shown in Fig. 29.  
(
Checkout  
64  
For best results, allow C7189 Wall Mount Temperature Sensor  
to absorb the air moving through the room for a minimum of  
twenty minutes before taking a resistance measurement.  
66  
68  
70  
With an accurate thermometer (±1°F [0.5°C]) measure the  
temperature at the sensor location, allowing time for the  
thermometer to stabilize before reading.  
37  
68-0280—01  
href="
VisionPROTM 8000 Touchscreen Programmable Thermostat  
TROUBLESHOOTING (TABLE 14)  
Table 14. Troubleshooting.  
Possible Cause  
Thermostat is not being powered.  
Symptom  
Action  
Display does not come on.  
Check for 24 Vac between C and Rc.  
Check that AAA batteries are installed  
correctly and are good.  
Temperature settings do not  
change.  
The upper or lower temperature limits Check temperature setpoints.  
were reached. Check Installer Setup Numbers 0600 and  
610; modify as needed.  
0
The keypad is fully locked.  
Check Installer Setup Number 0670 to  
change keypad locked options.  
Heating or cooling does not  
come on.  
Thermostat minimum off-time is  
activated.  
Wait up to five minutes for the system to  
respond.  
System selection is not set to Heat or  
Cool.  
Set system Selection to correct position.  
System type Selection is incorrect.  
Check Installer Setup Number 0170 and  
make sure correct System type is chosen.  
Thermostat is calling for Heat Heating or cooling equipment is not  
Heat on) or Cool (Cool on) but operating.  
no heating or cooling is  
Check wiring.  
(
Check Installer Setup Number 0170 and  
make sure correct system type is chosen.  
Verify operation of equipment in System Test  
mode.  
running.  
Heat does not turn on (Heat  
On is solid in the display).  
Heating equipment failure.  
Check for 24 Vac at the equipment on the  
secondary side of the transformer between  
power and common. If voltage is not present,  
check the heating equipment to find the cause  
of the problem.  
Check for 24 Vac between the heat terminal  
(
W) and transformer common. If 24 Vac is  
present, the thermostat is functional. Check  
the heating equipment to find the cause of the  
problem.  
Loose or broken wire connection  
between thermostat and heating  
equipment.  
Check for 24 Vac between the heat terminal  
(W) and transformer common. If voltage is not  
present, check wire connection (loose or  
broken) between the thermostat and the  
heating equipment.  
Cooling does not turn on (Cool Cooling equipment failure.  
On is solid in the display).  
Check for 24 Vac at the equipment on the  
secondary side of the transformer between  
power and common. If voltage is not present,  
check the cooling equipment to find the cause  
of the problem.  
Check for 24 Vac between the cool terminal  
(
Y) and transformer common. If 24 Vac is  
present, the thermostat is functional. Check  
the cooling equipment to find the cause of the  
problem.  
Loose or broken wire connection  
between thermostat and cooling  
equipment.  
Check for 24 Vac between the cool terminal  
(Y) and transformer common. If voltage is not  
present, check the wire connection (loose or  
broken) between the thermostat and the  
cooling equipment.  
Fan does not turn on in a call Fan Control in Heating is set to Gas or Set Fan Control in Heating to Electric Furnace  
for heat (electric furnace). Oil Furnace (Setting 0180). (Setting 0180).  
68-0280—01  
38  
href="
VisionPROTM 8000 Touchscreen Programmable Thermostat  
Table 14. Troubleshooting. (Continued)  
Possible Cause  
Symptom  
Action  
Heat pump puts out cool air in Changeover Valve (Installer Setup  
the heat mode and warm air in Number 0190) is not configured to  
Set Changeover Valve (Installer Setup  
Number 0190) to match the changeover  
the cool mode.  
match the changeover required by the required by the installed heat pump.  
installed heat pump.  
Both the heating and cooling The heating equipment is not a heat  
equipment are running at the pump but the System Type (Installer  
Set System Type (Installer Setup Number  
0170) to match the installed heating and/or  
cooling equipment.  
same time.  
Setup Number 0170) is set to Heat  
Pump.  
Heating and cooling wires are shorted Separate the shorted heating and cooling  
together. wires.  
Heating equipment is running Heating equipment is not a heat pump Set System Type (Installer Setup Number  
in the cool mode.  
but System Type (Installer Setup  
Number 0170) is set to Heat Pump.  
0170) to match the installed heating and/or  
cooling equipment.  
Heating equipment does not  
turn off and heat temperature but System Type (Installer Setup  
setting is set below room  
temperature (Heat On is not in  
the display).  
Heating equipment is not a heat pump Set System Type (Installer Setup Number  
0170) to match the installed heating and/or  
cooling equipment.  
Number 0170) is set to Heat Pump.  
Cannot set the system setting System Type (Installer Setup Number Set System Type (Installer Setup Number  
to Heat.  
0170) is set to Cool Only.  
0170) to match the installed heating and/or  
cooling equipment.  
Cannot set the system setting System Type (Installer Setup Number Set System Type (Installer Setup Number  
to Cool. 0170) is set to Heat Only or Heat Only 0170) to match the installed heating and/or  
with Fan. cooling equipment.  
Heat On is not in the display. System setting is not set to Heat and/or Set the system setting to Heat and set the  
temperature setting is not set above  
room temperature.  
temperature setting above the room  
temperature.  
Cool On is not in the display. System setting is not set to Cool and/or Set the system setting to Cool and set the  
the temperature setting is not set below temperature setting below the room  
room temperature.  
temperature.  
Wait is in the display.  
Compressor minimum off timer is  
active.  
Wait up to five minutes for the cooling or  
heating (heat pump) equipment to turn on.  
Screen Locked” appears on  
The keypad is fully or partially locked. Check Installer Setup Number 0670 to  
change keypad locked options.  
the screen and all or some of  
the keys do not respond.  
39  
68-0280—01  
href="
VisionPROTM 8000 Touchscreen Programmable Thermostat  
Automation and Control Solutions  
Honeywell International Inc.  
985 Douglas Drive North  
Golden Valley, MN 55422  
Honeywell Limited-Honeywell Limitée  
35 Dynamic Drive  
Toronto, Ontario  
1
M1V 4Z9  
6
8-0280—01 M.S. Rev. 03-11  
Printed in U.S.A.  
www.honeywell.com/yourhome  

Honeywell T8400C Thermostat User Manual

Honeywell 69 1776EFS 01 Thermostat User Manual

Honeywell RTH6500WF Thermostat User Manual

Honeywell T8501D Thermostat User Manual

Lux Products PSPH521 Thermostat User Manual

Lux Products PSD111 Thermostat User Manual

Honeywell perfect climate comfort center control system Thermostat User Manual

Honeywell RTH7400 Thermostat User Manual

Honeywell 3355 Thermostat User Manual

Aube TH110A SP P Thermostat User Manual