Trane XL950 Thermostat User Manual

Home

XL950 ComfortLink^™II Thermostat

User’s Guide

Amazingly versatile,

incredibly advanced

The ComfortLink^™II

thermostat integrates home

comfort into your personal

lifestyle like nothing you’ve

ever seen before.

Features Include...

•

Large Color Display

Simple Programming

Weather Forecast (via wireless home network)

Allergy Clean/Quick Clean Cycles

Interactive Touchscreen

1-Touch Presets

Built-in Help Screens

Operating Runtime Analysis

System Alerts

Lock Screen Security

Custom Screen Options

Screen Savers

Five Year Limited Warranty

Easy to use

Customizable

The simple design and easy to

Customize the screen to suit

Table of Contents

follow functions of this thermostat your unique needs.You can

Introduction..............................................1-4

Buttons and Navigations............................. 5

System, Fan, & Air Cleaner Modes .........6-7

Scheduling/Programming ........................8-9

Loading and Viewing Photos ...............10-11

Screen Saver Settings.............................. 12

Commonly Used Features........................ 13

Naming your System ................................ 13

Dealer Information Screen........................ 13

Setting Time and Date.............................. 14

Security Options....................................... 14

Runtime History........................................ 14

1-Touch Presets........................................ 14

Customize Your Home Screen.................. 15

Humidity.................................................... 15

Wireless Network Setup ......................16-19

Advanced Networking Information.......20-23

Multi-System Control ...........................24-25

Wireless Registration...........................26-27

Software Upgrades................................... 28

Troubleshooting ...................................29-30

Index......................................................... 30

Warranty................................................... 31

make it the most intuitive and

easy to use thermostat available.

Just touch the screen to try out

the functionality and make opera- the colors, and enjoy a photo

tional changes to the system in

your home.

setup shortcuts and an easy

access dashboard on the

Home screen. You can change

slideshow.

CAUTION

Help System

Use only your ﬁngertips to touch

the touchscreen. Using any other

implement can damage the screen.

On-screen notes provide addition-

al details. When more information

is needed, context sensitive help

is only a button touch away.

CAUTION

Use only a soft damp

cloth to clean the screen.

Scheduling

Scheduling setup is made easy

with the use of an on-screen

wizard that walks you through the

process.

1-Touch Presets

Cooling and Heating presets al-

low you to change your in-home

temperatures with the touch of a

button.

Easy to use... Everything is just a touch away

See and adjust multiple

systems

Choose the shortcut items that

show in this menu bar

See current

system status

View big, bold

at-a-glance

system status

Choose the

dashboard

items that

show in this

section

Use context

sensitive

help

Manually change setpoints or use

convenient Home, Away and Sleep presets

Change settings with just a

few button touches

Buttons and Navigation

Pressing a button will display additional information or

a new menu screen.

EXAMPLE: You may access the Menu screen by

pressing the “Menu” button on the home screen.

You may access the Settings Menu by pressing the

“Settings” button from the Menu screen.

EXAMPLE: In the following sections, button sequenc-

es will be shown with icons. For example, the se-

quence on this page would be represented this way:

System ON/OFF, Mode Selection

1) System Mode

To the right of the Menu button are 3

Mode buttons:

The “Auto” System Mode will

switch between heating and

cooling automatically.

1) The ﬁrst sets System Mode

(including OFF).

“Heating” and “Cooling”

modes are dedicated

2) The second controls Fan Mode.

3) The third controls Air Cleaner Mode.

modes. For example, you

may wish to set your sys-

tem to “Heating” in winter

months so your cooling unit

does not run. Likewise, you may wish to set your system to “Cooling” in sum-

mer months so that your furnace does not run.

Each button has mode options to choose

from. The chosen mode is conveniently

displayed on its home screen button so

you can see the functions your system is

performing.

To completely turn off your system, select “Off”.

2) Fan Mode

In “Auto” Fan Mode the sys-

tem’s fan will run only when

the system runs.

The fan will run continuously

when the Fan Mode is set to

“On”.

The “Circulate” Fan Mode

will run the fan at least 10-

55 minutes out of every hour, decreasing hot/cool spots throughout your house.

Mode Selection

3) Air Cleaner Mode

Automatic means the air cleaner will run when the fan runs.

Quick Clean is a full power air cleaning cycle that increases the system fan speed setting (when not

actively heating or cooling) to 100% for three hours to achieve maximum clean air delivery rate.

Allergy Clean is a full power air cleaning cycle that increases the system fan speed setting (when not

actively heating or cooling) to 100% for 24 hours to achieve maximum clean air delivery rate.

Set Point Panel

A Setpoint is the desired temperature you would like your home heated or cooled to when in one of the three System Modes.

Heating Setpoint Panel

Cooling Setpoint Panel

Raise

To adjust the

Heating Setpoint,

select “Heating”

and raise or lower

the temperature to

reach your desired

setpoint.

Cooling Setpoint,

select “Cooling”

and raise or lower

the temperature to

reach your desired

setpoint.

Lower

Manually Set up a Schedule

The procedure below describes setting up a manual schedule. Scheduling can also be set up via Guided Scheduling which creates a schedule by

asking you a series of questions. Guided Scheduling can also be selected in the screen below.

1) Turn Scheduling On (and select Manual Scheduling)

2) Enter the Schedule Menu

Default

Schedule

3) Select a day or time period

By default the schedule shows the periods Wake, Away, Home and Sleep. Each

day can have its own schedule and each schedule will be a unique color.

Finished Examples:

4) Select the days you would like

to schedule

Example A:

By selecting more than one day, you can

set the schedule to be the same for those

days. For example, you may keep the

Example A is for someone who works and is

out of the house during weekdays.

same hours each weekday

5) Adjust the Time for each period

Select a period one at a time and set its

beginning time by pressing the “Time” button.

Press the “Temperature” button to adjust the

setpoints for each period.

Example B:

NOTE: Notice that you can delete or add

periods (maximum 6 per day).

Example B is for someone who is out of town

Monday–Thursday.

6) Adjust the Temperature for each

period

Press the “Temperature” button to adjust

setpoints for each period.

7) Press “Apply” when complete

Using Photos

You can set up a photo album and a screen saver using

your own photos.

Notch at top

Using an SD Card

Insert the SD Card at the bottom right hand side of the thermostat, taking

care to keep the card’s “notch” in the orientation shown.

NOTE: The card must remain inserted to view the photos

and the SD card must remain “unlocked.”

Recommended SD Cards:

Required Photo Formats:

SD, SDHC

Photos on your SD card must be in .jpg, .jpeg, .bmp, .png, or

.gif formats and each photo must be less than 3MB in ﬁle size.

SD Adapter – microSD, miniSD, microSDHC, mini SDHC

Photo Album

View and set up your photo album.

Load and Select Photos

1) If you do not yet have

your SD card inserted

or it is not inserted all

the way, you will see

this message.

3) Browse the album us-

ing the arrows on the

right and left edges of

the screen. Touch the

image to see full size

images.

Check the “Add to Slide-

show” box to include the

a photo in a slideshow.

2) Images will be loaded

from your SD card into

the viewer and sized

to ﬁt the screen.

4) In thumbnail view,

you can view up to 15

photos at time. You

can also see or select

which photos will be in-

cluded in a slideshow.

5) After you have selected which photos to include in your slideshow, press “Settings” to conﬁgure the Screen Saver.

(Or navigate to the Screen Saver menu using the path on the next page.)

Screen Saver

A standard or a custom photo screen saver can be selected.

1) If you desire, turn “On” the screen saver.

Set the wait time until the screen saver

starts.

2) The “Default Screen Saver” shows the cur-

3) Set the number of seconds before the next

photo will display.

rent temperature as a ﬂoating icon over a

darkened black screen.

Select “Image Screen Saver” if you have

inserted an SD card and added photos to a

slideshow.

Other Commonly Used Features

The following pages highlight some of the more common processes you will use.

NameYour System

Give your system a name. This is very important if you have more than one system in your home.

Events and Vacations

Set up how your system will operate for special events or when you are away from home for extended periods.

Dealer Information

Contact your dealer by using contact information in the Service menu.

Time & Date

Set time, date and time zone. If a wireless network is set up, the time can be automatically synced via the internet.

Security

Protect your system from accidental or unwanted changes to your system by using a PIN lock.

1-Touch Presets

Set up these presets to make quick temperature setpoint changes from the Home Screen.

System Runtime History

System Runtime History monitors how much your system runs for both

heating and cooling and also displays the average indoor temperature and

outdoor high and low temperatures. This data allows you to better manage

your utility costs by seeing when and how much your system is operating.

Customize your Home Screen

Add shortcuts and customize the dashboard.

Wireless Network Setup

Set up a connection to your wireless network to enable weather and software update features. See the following section

for setup details (802.11 B/G wireless router and internet required).

Humidity

You may see and adjust the humidity level in your home and adjust the humidity setpoints for both Heating and Cooling

modes (for systems equipped with humidity control).

Optional Wireless Networking

1. Your thermostat can access

real-time weather conditions,

forecasts and alerts.

Enabling wireless networking brings addi-

tional functionality to your thermostat.

IMPORTANT:

After wireless networking is enabled,

you will need to register your system

with a valid email address before the

weather data will be displayed.

2. When you have multiple systems

in your home, each thermostat

can see and control the others.

NOTE: In a Multi-System envi-

ronment, it is recommended to

name each thermostat before

enabling wireless networking.

NOTE: On a normally conﬁgured

network, familiarity with a personal

wireless network is helpful but not

necessarily required for installation.

3. You can download software up-

dates for efﬁcient operation and

the ability to use new features as

soon as they are released.

If your personal wireless network is

a secure network, you will need the

password.

7.1 Enabling Wireless Networking

1) Enter the Wireless Network Setup Menu.

2) Enable the wire-

less radio by

3) After the wire-

less radio is

pressing “Wire-

less ON/OFF”.

enabled, press

the “Connect to a

Network” button

to choose from

a list of available

wireless net-

works.

NOTE: If the router is conﬁgured to not broadcast its SSID, refer to Advanced Network Settings.

7.2 Selecting a Network

Available broadcasting networks with an adequate signal strength will

display their SSIDs (Service Set IDentiﬁers) in this screen.

A closed lock icon next to the SSID indicates a secure network. An

open lock indicates a non-secure, “open” network.

Select your network and press “Connect”.

The signal strength is indicated in bars. The more bars, the better the signal strength.

Signal Strength Indicators

Bars (Color)

A minimum of three bars is required for stable network operation. The network will op-

erate with one or two bars, but may result in intermittent or lost connections.

Indicator

Description

Very Weak

Weak

One (Red)

Two (Yellow)

Three (Green)

Four (Green)

NOTE: Signal strength may be affected by router model, interference, obstructions and

distance from the router. Consult router documentation for additional information.

Strong

Very Strong

If a “Network Not Found” message is displayed, verify the wireless network is function-

ing and within range. Consult router documentation for additional information.

7.3 Enter Network Key/Password

1A)If the network is

unsecured (with an

“open” padlock),

the following mes-

sage will be dis-

played.

3) The thermostat

will connect to the

wireless network.

1B)If the network is

secured (with a

“closed” padlock),

the following mes-

sage will be dis-

played.

4) When the thermo-

stat has success-

fully joined the

wireless network,

the name of the

network will be

displayed with a

green dot to the

left and a signal

strength indicator

to the right.

2) Enter the network

key (case-sensitive

password). You

or your network

administrator will

need to provide the

required informa-

tion.

7.4 Advanced Networking Information

Enter the Advanced Network Setup Menu.

Advanced networking will be required in the following two instances:

1. When connecting to a non-broadcast network

2. When conﬁguring a static IP address

IMPORTANT:

The Advanced Network screens are intended for individuals with networking familiarity.

You or your network administrator will need to provide the required information.

If any of this information is unknown or for questions speciﬁc to the wireless router, please

consult the router documentation or your network administrator.

7.5 Network Security

When the network’s SSID is not broadcast (hidden), manual conﬁguration in this screen is required.

1) The “Network Security” button in this Ad-

vanced Network Settings menu will be

highlighted by default.

2) Press the “Enter SSID Name” button.

3) Enter the SSID Name using the on-screen

keypad.

4) Select a network security type.

5) Press “Enter Network Key” button.

6) Enter the Network Key using the on-screen

keypad.

7.6 Host Settings

This screen is used to control how the thermostat obtains network addresses and is needed when DHCP (Dynamic Host Conﬁguration Protocol) has

been turned off or is not available on the router. Otherwise, you may use DHCP to automatically obtain this information. This manual conﬁguration is

required if a static IP address is desired.

NOTE: No additional conﬁguration may be required in a non-broadcast network where IP addresses are assigned by DHCP. You may Connect to the

network without modifying the Host Settings.

1) Select the “Host Settings” button to access

the second screen of settings in this Ad-

vanced Network Settings menu.

2) Select IP Address, Gateway and Subnet

Mask buttons as required.

3) Enter the IP address as required for each.

4) To manually select a DNS server, enter IP

address(es).

5) After all the addresses are assigned, Con-

nect to the network.

6) To change a Static IP Address to a DHCP Ad-

dress, press “Release and Renew IP Address”.

7.7 Network Properties

The Network Properties screen displays the thermostat’s current network in-

formation.

7.8 Disconnecting from a Network

Once a network has been joined, the thermostat will reconnect to it after signal

or power interruptions. When connected, a green dot will be shown.

To disconnect from this network, enter the “Connect to a Network” menu and

select “Disconnect”.

NOTE: When joining a different network, the current router must be discon-

nected in this menu before a new one may be selected. In addition if settings

are changed on the owner’s router, the network may need to be disconnected

and reconnected in this menu.

Repeat previous steps to connect to a different network.

7.9 Multi-System Environments

1) In a multi-system environment each thermostat can see and control the

others.

NOTE: The thermostats must have wireless enabled and be connected to

the same personal wireless network.

2) Each thermostat belongs to an Access Control Group—set to “Group A” by

default. Therefore, if two thermostats are connected to the same wireless

network and have matching Group IDs (shown as Group A to the right),

they will be able to communicate with each other.

Set the thermostats to the desired Group.

Multi-System Environments (Continued)

6) System and Zone

Names may be set

in the Zone Names

screen. The “Rename

System” and “Rename

Zone” buttons al-

3) In a multi-system

environment where

the systems are in

the same Group, the

“Zones” button will

appear in place of the

“System” button (see

picture at right).

low entering custom

names from a keypad.

The “Select Zone

Name” and “Select

System Name” buttons

allow selecting pre-

conﬁgured names from

a list.

Pressing the “Zones”

button opens the

Zone Menu.

4) The Zone Menu is

shown at right.

7) In multi-system envi-

ronments, the main

screen display will

change to indicate the

presence of multiple

zones. (Notice the new

zone button—labeled

“Upstairs”—at right.)

5) The Zone Over-

view menu shows

a quick view of

The arrow buttons

each zone’s cur-

rent condition.

on either side of this

displayed zone name

will allow viewing of

the other zone setting

screens one at a time.

Wireless Registration

Registration is required for Weather, Software Updates and linking two or more thermostats together. Registration ensures that your thermostat is us-

ing the most up-to-date software and will also let you take advantage of exciting new features in the future. You will be notifed via email when there is

a software upgrade available. For complete privacy information see our Privacy Policy at trane.com.

1A)In the Network Setup

Screen, select the

2) Read and accept the

License Agreement

to proceed with the

“Register Now” button

to begin registration.

Proceed to Step 2.

Registration process.

1B)If instead you try to

connect to Weather

before you have reg-

istered, you will be

3) The E-mail Registra-

tion screen explains

that after entering

an address, you will

receive a veriﬁcation

code via email.

prompted to register.

5) Enter a valid email

address, press “Ap-

ply” to proceed.

8) Check your email to

ﬁnd your 5-digit veri-

ﬁcation code.

6) The thermostat will

connect to a remote

server.

9) Enter the 5-digit veri-

ﬁcation code.

NOTE: This will only

need to be done one

time.

7) After connecting to

the server, an email

will automatically be

sent to your email

address.

10)After entering your

veriﬁcation code,

your additional fea-

tures will now be

enabled.

Software Upgrades

Your thermostat is built with the future in mind and has the ability to upgrade its operating sys-

tem. Software upgrades ensure your thermostat has the most up-to-date software optimizing

its operation and providing exciting new features as they become available.

Requirements

•

You must have a currently active internet connection.

You must already have registered your thermostat (see previous section).

You must have an SD card with adequate memory available. Data for the

upgrade will be stored on this card.

The Software Upgrades menu is accessed by navigating to Menu --> Settings --> Network.

After pressing the “Software Upgrades” button, follow the guided instructions on the series of

screens.

Upgrade the software by one of the following methods:

1) Select the “Check for updates on the internet” box as shown in the screen at right. This is the

default setting and the easiest way to upgrade your thermostat’s software.

2) Alternatively, using a web browser and your computer, download the latest sofware upgrade

image from the trane.com website and place this computer ﬁle on an SD card. After transfer-

ring the SD card from your computer to the thermostat, select “Check for upgrades on SD

Card” as shown in the screen at right.

Follow the instructions to upgrade your thermostat. Additional instructions are found on the

trane.com website.

Troubleshooting

Slow response or

unexpected operation:

Reboot your thermostat at

the following location.

“No System Found” displays on the screen:

If this message stays on your screen, press the

“Reboot” button shown at right.

No response to any button presses:

Remove and re-install the thermostat as shown below. The boot up process may take several minutes.

Remove Thermostat

Remove thermostat from its sub-

base by grasping at edges and

gently pulling the thermostat straight

towards you. It should release

without much effort.

Re-Install Thermostat

Re-install thermostat ﬂat onto sub-base

being careful to align unit correctly with

the sub-base before applying force.

Thermostat should ﬁt snug and not

“rock” when properly installed.

System Alerts

1) When your system indicates an

issue with communication or

operation, an alert will display on

the screen.

Index of Functionality

1-Touch Presets..................................14

Air Cleaner Mode..................................7

Alerts ..................................................29

Customize Home Screen....................15

Dealer Information..............................13

Events.................................................13

Fan Mode..............................................6

Humidity..............................................15

Multi-System.......................................24

Name System.....................................13

Network ..............................................18

Network Key .......................................19

Photo Album.......................................10

Registration ........................................26

Scheduling............................................8

Screen Saver......................................12

Security ..............................................14

Software Upgrades.............................28

System Mode........................................6

System ON/OFF...................................6

System Runtime History.....................14

Time/Date...........................................14

Troubleshooting ..................................29

Wireless Networking...........................16

Click the “Dealer Contact Info”

to retrieve your dealer’s phone

numbers and website informa-

tion.

2) Press “Close” to dismiss the

alert. The error message can

be recalled by pressing the Alert

icon which will remain in the

menu bar.

Dealer Information can also be accessed by this path:

FCC Information

Limited Warranty

This equipment has been tested and found to comply with the limits for

a Class B digital device, pursuant to Part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful in-

terference in a residential installation. This equipment generates, uses,

and can radiate radio frequency energy and, if not installed and used

in accordance with the instructions, may cause harmful interference to

radio communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged

to try to correct the interference by one of the following measures:

(1) Reorient or relocate the transceiver antenna. (2) Increase the separa-

tion between the equipment and transceiver. (3) Connect the equipment

into an outlet on a circuit different from that to which the transceiver is

connected. (4) Consult the dealer or an experienced radio/TV techni-

cian for help.

This limited warranty is extended by the manufacturer to the original purchaser and to any suc-

ceeding owner of the real property to which the low voltage room comfort control is originally

afﬁxed and applies to products purchased and retained for use within the U.S.A. and Canada. The

limited warranty period begins when the low voltage room comfort control installation is com-

plete, veriﬁed by installer’s in voice or similar document. If installation completion and start-up

date cannot be veriﬁed by installer’s invoice or similar document, limited warranty coverage be-

gins six (6) months after the date of manufacture based on the low voltage room comfort control

serial number. If any part of your low voltage room comfort control fails because of a manufac-

turing defect within ﬁve (5) years from the date the limited warranty period begins, Warrantor

will furnish without charge a new low voltage room comfort control. Any local transportation,

related service labor, and diagnosis calls, are not included. This limited warranty does not apply

if the low voltage room comfort control was purchased direct (i.e. from internet websites or auc-

tions) on an uninstalled basis. Additionally, this limited warranty will not apply unless the low

voltage room comfort control is: (1) installed by a licensed or qualiﬁed HVAC technician, (2)

applied and installed in accordance with the manufacturer’s recommendations in its Installer’s

Guide, and (3) in compliance with all industry standards, national, state, and local codes.

This limited warranty does not cover your low voltage room comfort control if it is damaged

while in your possession; including, but not limited to (1) damage caused by unreasonable use

of the low voltage room comfort control, (2) damage from failure to properly maintain the low

voltage room comfort control as set forth in the Use and Care manual, (3) damage that is not con-

sidered a manufacturing defect, such as acts of God, malfunctions or failures resulting from ﬁre,

water, storms, lightning, earth quake, theft, riot, misuse, abuse, increased utility usage costs, (4)

performance problems due to improper selection/equipment match-up, installation, or applica-

tion, or (5) failures, defects, or damages (including, but not limited to, any failure or loss of data)

caused by any third party product, service, or system connected or used in

This device complies with Part 15 of the FCC Rules and Industry

Canada. Operation is subject to the following two conditions: (1) This

device may not cause harmful interference, and (2) This device must

accept any interference received, including interference that may cause

undesired operation.

FCC/IC Caution: Any changes or modiﬁcations not expressly approved

by Trane could void the user’s authority to operate this equipment.

conjunction with your low voltage room comfort control. THE LIMITED WARRANTY AND

LIABILITY SET FORTH HEREIN ARE IN LIEU OF ALL OTHER WARRANTIES AND LI-

ABILITIES, WHETHER IN CONTRACT OR IN NEGLIGENCE, EXPRESSED OR IMPLIED,

IN LAW OF IN FACT, INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY

AND FITNESS FOR PARTICULAR USE, AND IN NO EVENT SHALL WARRANTOR BE

LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states do not

allow limitations on how long an implied limited warranty lasts or do not allow the exclusion or

limitation of incidental or consequential damages, so the above limitation or exclusion may not

apply to you. This limited warranty gives you speciﬁc legal rights, and you may also have other

rights which vary from state to state. Parts will be provided by our factory organization through

an authorized service organization in your area listed in the yellow pages. If you wish further

help or information concerning this limited warranty, contact:

Important Note: To comply with the FCC RF exposure compliance

requirements, no change to the antenna or the device is permitted. Any

change to the antenna or the device could result in the device exceeding

the RF exposure requirements and void user’s authority to operate the

device. This device has been designed to operate with an internal PCB

trace antenna.

To comply with IC RF exposure limits for general population/un-

controlled exposure, the module with ﬁxed internal antenna must be

installed to provide a separation distance of at least 20 cm from all

persons and must not be collocated or operating in conjunction with

any other antenna or transmitter.

Residential Systems, 6200 Troup Highway, Tyler, TX 75707.

TRANE U. S. INC.

MODEL NUMBER

TZONE950AC52Z

Attention: Consumer Relations

FCC ID: XVRZONE950TRX

IC: 6178D-ZONE950TRX

Or visit our website: www.trane.com/residential

TW-1019-5109

6200 Troup Highway

Tyler, TX 75707

06/11

32-5070-02

The manufacturer has a policy of continuous product and product data improve-

ment and it reserves the right to change design and specifications without notice.

Honeywell L4006H Thermostat User Manual

Honeywell TH3110D Thermostat User Manual

White Rodgers 1F51N 619 Thermostat User Manual

White Rodgers 1D30(W) Thermostat User Manual

Hunter Fan T200 Thermostat User Manual8659

Honeywell 42011076 003 Thermostat User Manual

Honeywell V8944N Thermostat User Manual

Honeywell 69 0786 2 Thermostat User Manual

Honeywell PCR 100 Thermostat User Manual

Lennox 51M37 Thermostat User Manual