Home

href="
Operating  
Manual  
RTH2510  
7-day Programmable Thermostat  
href="
CAUTION: EQUIPMENT DAMAGE HAZARD  
To prevent possible compressor damage, do not use Cooling mode when the  
outdoor temperature is below 50°F (10°C).  
Need Help?  
For assistance with this product please visit http://DIYthermostats.honeywell.com  
or call Honeywell Customer Care toll-free at 1-800-468-1502.  
Read and save these instructions.  
href="
Programmable Thermostat RTH2510  
Table of contents  
Overview  
Appendices  
Thermostat features ..............................2  
Quick start .............................................3  
Quick reference to controls ...................4  
Quick reference to display.....................5  
Battery replacement ........................... 15  
In case of difficulty .............................. 16  
Customer assistance .......................... 17  
One-year limited warranty .................. 18  
Programming & Operation  
Setting the clock....................................6  
System switch (Heat/Cool)....................7  
Fan switch (Auto/On).............................8  
Using the schedule...........................9-11  
Temporary schedule override..............12  
Permanent schedule override .............13  
Adaptive Intelligent Recovery (AIR) ....14  
Compressor protection........................14  
Your new thermostat is pre-programmed  
and ready to go!  
See page 3 for quick start.  
href="
Operating Manual  
About your new thermostat  
Your new thermostat has been designed to give you many years of reliable service and  
easy-to-use, push-button climate control.  
Features  
Backlit display is easy to read  
Displays ambient (measured) temperature at all times  
One-touch access to setpoint temperature  
ENERGY STAR® compliant to greatly reduce your heating/cooling expenses  
Separate programmable daily schedules (7-day programming)  
Temporary and permanent override of schedule  
Adaptive Intelligent RecoveryTM ensures right temperature at the right time  
Built-in compressor protection  
2
href="
Programmable Thermostat RTH2510  
This thermostat is ready to go  
Simply perform the three steps below and the thermostat is in operation:  
n Set the clock ................................................................................................ See page 6  
o Select whether to heat or cool...................................................................... See page 7  
p Select whether to run the fan continuously or only when needed................ See page 8  
Your thermostat is pre-programmed with ENERGY STAR® settings. If you do not wish to  
use these settings, you can:  
Modify the schedule....................................................................................See page 11  
Temporarily override the schedule ............................................................. See page 12  
Permanently override the schedule............................................................ See page 13  
3
href="
Operating Manual  
Quick reference to controls  
Screen  
Lit for 12 seconds when  
you press any button.  
Up/Down buttons  
Press to adjust temperature.  
Press to set clock, day or  
schedule (see pages 6 & 11).  
System switch (see page 7)  
Cool: System is in Cooling mode.  
Off: System is off.  
Heat: System is in Heating mode.  
Press to override schedule and  
hold temperature (see page 13).  
Fan switch (see page 8)  
Press to run (follow) schedule  
On: Fan runs continuously.  
Auto: Fan runs only when  
heating or cooling is activated.  
(
see page 9).  
4
href="
Programmable Thermostat RTH2510  
Quick reference to display  
Setpoint indicator  
Appears when the setpoint  
temperature is displayed.  
Temporary schedule override  
(see page 12)  
Low-batterywarning  
see page 15)  
(
Permanent schedule override  
see page 13)  
Clock  
Schedule period  
(
Temperature  
The ambient (measured) temperature is  
normally displayed. To view the setpoint  
temperature, press the Up or Down  
button once. The setpoint temperature  
will appear for five seconds.  
System status  
Cool On: Cooling is activated. *  
Heat On: Heating is activated. *  
Aux On: Auxiliary heat is activated.  
*
When Heat On or Cool On is flashing, compressor protection is engaged (see page 14).  
5
href="
Operating Manual  
Set the clock  
n Press the Set button. Set Time will appear on the screen and the  
time display will flash.  
o Press the Up or Down button to set the time.  
p Press the Set button again. Set Day will flash on the screen.  
q Press the Up or Down button to select the day of the week.  
r Press the Run button to save the changes & exit. (The changes  
are also saved if you do not press any button for 60 seconds.)  
NOTE: The clock has lost its settings when the time display flashes. If the thermostat is  
following the schedule, it will use the temperature settings programmed for the Wake  
period for Monday until you readjust the clock.  
6
href="
Programmable Thermostat RTH2510  
System switch (Heat/Cool)  
Use the System switch to place the system in  
one of the following modes:  
Cool: System is in Cooling mode.  
Off: System is off.  
Heat: System is in Heating mode.  
CAUTION: EQUIPMENT DAMAGE HAZARD.  
Do not use Cooling mode when the outdoor temperature is below 50°F (10°C).  
7
href="
Operating Manual  
Fan switch (Auto/On)  
Use the Fan switch to select the fan operation.  
Auto: The fan runs only when heating or  
cooling is activated (commonly used setting).  
On: The fan runs continuously.  
8
href="
Programmable Thermostat RTH2510  
Using the schedule  
Press the Run button to follow the programmed schedule. For maximum energy savings  
while maintaining comfort, you can program the schedule such that the temperature is at  
an economical level when you sleep or leave for work and at a comfortable level when you  
are awake and at home. You can program up to four periods per day:  
Wake  
Leave  
Return  
Sleep  
Starts when you wake up  
Starts when you leave for work  
Starts when you return home  
Starts when you go to sleep  
To program a period, you need to set its start time and its two temperature settings (one  
when the thermostat is in cooling mode and another one when it is in heating mode). You  
can set a different program for each day of the week.  
9
href="
Operating Manual  
®
Energy Star settings  
The thermostat has been programmed with the ENERGY STAR® settings for each day of  
the week (see table below). See next page if you wish to modify the settings.  
Period  
Wake  
Start time  
6:00 AM  
8:00 AM  
6:00 PM  
10:00 PM  
Heat  
Cool  
70°F (21°C)  
62°F (16.5°C)  
70°F (21°C)  
62°F (16.5°C)  
78°F (25.5°C)  
85°F (29.5°C)  
78°F (25.5°C)  
82°F (27.5°C)  
Leave  
Return  
Sleep  
1
0
href="
Programmable Thermostat RTH2510  
Modifying the schedule  
n
Press the Set button 3 times until Set Schedule appears. The Wake period is  
displayed.  
NOTE: To set another period, press the Set button as many times as needed until the  
desired period and the desired day are displayed and its time or temperature is flashing. Wake period for  
Monday is set to 6  
a.m. and 70°F  
o
p
q
When the time flashes, press the Up or Down button to set the time.  
Press the Set button.  
To set the temperature for cooling mode, first place the System switch in Cool. To  
set the temperature for heating mode, first place the System switch in Heat.  
r
s
t
u
When the temperature flashes, press the Up or Down button to set the temperature.  
Press the Set button.  
To skip a period  
(
except Wake),  
press the Hold  
button for 4 seconds  
while that period is  
displayed.  
Repeat steps 2 through 6 to set each of the remaining periods.  
Once all changes are made, press the Run button to save them and return to  
normal display. (The changes will automatically be saved if you do not press any  
button for 60 seconds.)  
11  
href="
Operating Manual  
Temporary override of schedule  
To temporarily ignore the schedule, press the Up or  
Down button until the desired temperature is displayed.  
The word Temporary will appear on the screen and the  
period display will flash to indicate that the current period  
has been overridden. The new temperature will be used  
until the next period begins.  
NOTE: Pressing the Up or Down button once will display the setpoint temperature. To  
change the setpoint temperature, press either button more than once.  
Press the Run button if you wish to cancel the temporary setting before the beginning of  
the next period.  
1
2
href="
Programmable Thermostat RTH2510  
Permanent override of schedule  
To permanently ignore the schedule, press the Up or  
Down button until the desired temperature is displayed.  
Then, press the Hold button to maintain the new  
temperature indefinitely. The word Hold will appear on  
the screen.  
Press the Run button if you wish to cancel the override  
and resume the schedule. The word Hold will disappear  
and the thermostat will be set to the temperature  
programmed for the current period.  
1
3
href="
Operating Manual  
Adaptive Intelligent Recovery (AIR)  
Adaptive Intelligent Recovery™ allows the thermostat to “learn” how long your furnace or  
air conditioner takes to reach the set temperature. Simply program the desired times and  
desired temperatures into the schedule. The thermostat will determine when to activate  
heating or cooling so that the desired temperature is attained at the desired time.  
Example: If you set the Wake time to 6 a.m. and the temperature to 70 °F (21 °C), the heat will  
come on before the set time, so the temperature is 70 °F (21 °C) by the time you wake at 6 a.m.  
Built-in compressor protection  
Your thermostat has a feature that helps prevent damage to the compressor of your air  
conditioning or heat pump system. Because damage can occur if the compressor is  
restarted too soon after shutdown, this feature forces the compressor to wait 5 minutes  
before restarting. During the wait time, the message Cool On or Heat On flashes on the  
screen. When the safe wait time has elapsed, the message stops flashing and the  
compressor turns on.  
1
4
href="
Programmable Thermostat RTH2510  
Battery replacement  
Set the System switch to Off before removing the batteries. Otherwise, the  
heating/cooling system could remain activated even when batteries are  
removed.  
Install two fresh AAA batteries when Lo Batt flashes on  
the screen. Lo Batt appears for 60 days before the  
batteries are depleted.  
Replace batteries once a year, or when you will be away  
for more than a month.  
Most settings are stored in non-volatile (permanent)  
memory. Only the clock and the day must be set after you  
replace the batteries.  
1
5
href="
Operating Manual  
In case of difficulty  
Screen is blank.  
• Ensure two fresh AAA alkaline batteries are correctly installed.  
Temperature settings cannot be • The System switch is off.  
changed. • You are setting the temperature outside its allowable range:  
Heat: 40°F to 90°F (4.5°C to 32°C)  
Cool: 50°F to 99°F (10°C to 37°C)  
Cool On or Heat On is flashing. • The compressor protection delay is underway. Wait for the delay  
to end (maximum of 5 minutes).  
HI appears on the screen.  
LO appears on the screen.  
E1 appears on the screen.  
E2 appears on the screen.  
• The ambient (measured) temperature is above 122°F (50°C).  
• The ambient (measured) temperature is below 32°F (0°C).  
• The temperature sensor circuit is opened. Replace the thermostat.  
• The temperature sensor circuit is shorted. Replace the thermostat.  
1
6
href="
Programmable Thermostat RTH2510  
Customer assistance  
For assistance with this product, please visit http://DIYthermostats.honeywell.com.  
Or call Honeywell Customer Care toll-free at 1-800-468-1502.  
To save time, before calling, proceed as follows:  
1)  
Loosen the locking screw at the bottom of the thermostat. Note that  
the screw is captive and cannot be removed from the wallplate.  
2
)
)
Separate the thermostat from the wallplate as per figure on the right.  
3
Note your model number and date code on the thermostat’s  
wallplate.  
1
7
href="
Operating Manual  
One-year limited warranty  
Honeywell warrants this product, excluding battery, to be free from defects in the workmanship or  
materials, under normal use and service, for a period of one (1) year from the date of purchase by the  
consumer. If at any time during the warranty period the product is determined to be defective or  
malfunctions, Honeywell shall repair or replace it (at Honeywell’s option).  
If the product is defective,  
(
i) return it, with a bill of sale or other dated proof of purchase, to the place from which you purchased  
it; or  
(
ii) call Honeywell Customer Care at 1-800-468-1502. Customer Care will make the determination  
whether the product should be returned to the following address: Honeywell Return Goods, Dock 4  
MN10-3860, 1885 Douglas Dr. N., Golden Valley, MN 55422, or whether a replacement product  
can be sent to you.  
This warranty does not cover removal or reinstallation costs. This warranty shall not apply if it is shown  
by Honeywell that the defect or malfunction was caused by damage which occurred while the product  
was in the possession of a consumer.  
1
8
href="
Programmable Thermostat RTH2510  
Honeywell’s sole responsibility shall be to repair or replace the product within the terms stated above.  
HONEYWELL SHALL NOT BE LIABLE FOR ANY LOSS OR DAMAGE OF ANY KIND, INCLUDING  
ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING, DIRECTLY OR INDIRECTLY,  
FROM ANY BREACH OF ANY WARRANTY, EXPRESS OR IMPLIED, OR ANY OTHER FAILURE OF  
THIS PRODUCT. Some states do not allow the exclusion or limitation of incidental or consequential  
damages, so this limitation may not apply to you.  
THIS WARRANTY IS THE ONLY EXPRESS WARRANTY HONEYWELL MAKES ON THIS  
PRODUCT. THE DURATION OF ANY IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF  
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, IS HEREBY LIMITED TO THE  
ONE-YEAR DURATION OF THIS WARRANTY.  
Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may  
not apply to you. This warranty gives you specific legal rights, and you may have other rights which  
vary from state to state.  
If you have any questions concerning this warranty, please write to Honeywell Customer Relations,  
1985 Douglas Dr, Golden Valley, MN 55422 or call 1-800-468-1502. In Canada, write to Retail  
Products ON15-02H, Honeywell Limited/Honeywell Limitée, 35 Dynamic Drive, Scarborough, Ontario  
M1V 4Z9.  
1
9
href="
Automation and Control Systems  
Honeywell International Inc.  
1
985 Douglas Drive North  
Golden Valley, MN 55422  
Honeywell Limited  
3
5 Dynamic Drive  
Scarborough, Ontario M1V 4Z9  
Printed in USA  
6
9-2381ES-01  
10-09  
href="
Manual del  
usuario  
RTH2510  
Termostato programable para 7 días  
href="
ADVERTENCIA: PELIGRO DE DAÑAR EL EQUIPO  
Para evitar posibles daños en el compresor, el termostato no se debe utilizar en  
Modo Enfriamiento cuando la temperatura exterior sea inferior a 50°F (10°C).  
¿
Asistencia?  
Para obtener asistencia relacionada con este producto, se recomienda visitar http://DIYthermostats.honeywell.com  
o llamar al número sin cargo del Servicio de Atención al Cliente de Honeywell: 1-800-468-1502  
.
Leer y conservar estas instrucciones  
href="
Termostato programable RTH2510  
Índice  
Generalidades  
Apéndices  
Características del termostato...............2  
Puesta en marcha rápida ......................3  
Referencia rápida para los controles.....4  
Referencia rápida para la pantalla ........5  
Reemplazo de las pilas ...................... 15  
En caso de dificultades....................... 16  
Asistencia al cliente............................ 17  
Garantía limitada de un año ............... 18  
Programación y funcionamiento  
Ajuste del reloj.......................................6  
Conmutador del sistema (Heat/Cool)....7  
Conmutador del ventilador (Auto/On)....8  
Uso del horario.................................9-11  
Cancelación temporaria del horario ....12  
Cancelación permanente del horario ..13  
Adaptive Intelligent Recovery (AIR) ....14  
Protección del compresor....................14  
El termostato está preprogramado y  
listo para funcionar.  
Referirse a la página 3 para un  
encendido rápido.  
href="
Manual del usuario  
Información sobre el termostato  
Este nuevo termostato ha sido diseñado para brindar muchos años de funcionamiento  
fiable y permitir un control climático fácil de usar con sólo apretar un botón.  
Características  
Pantalla con luz de fondo de lectura fácil.  
Indica la temperatura ambiente (medida) en todo momento.  
Un sólo botón permite ver la temperatura del punto de ajuste.  
Con ENERGY STAR® se economiza en calefacción o aire acondicionado.  
Horarios programables separados para cada día (programación de 7 días).  
Cancelación temporaria y permanente del horario.  
Adaptive Intelligent RecoveryTM asegura la buena temperatura en el buen momento.  
Protección del compresor incorporada.  
2
href="
Termostato programable RTH2510  
El termostato está listo para funcionar  
Basta con llevar a cabo las tres etapas siguientes para poner el termostato en marcha:  
n Ajustar el reloj. ..................................................................................................página 6  
o Seleccionar calefacción o enfriamiento.............................................................página 7  
p Seleccionar el modo de funcionamiento del ventilador.....................................página 8  
Los ajustes de ENERGY STAR® están preprogramados en el termostato. Si no se desea  
usarlos, se puede:  
Modificar el horario.......................................................................................... página 11  
Cancelar el horario de manera temporaria .....................................................página 12  
Cancelar el horario de manera permanente ...................................................página 13  
3
href="
Manual del usuario  
Referencia rápida para los controles  
Pantalla  
Botones Arriba/Abajo  
Presionar para ajustar  
la temperatura.  
Se ilumina durante 12 segundos  
cuando se presiona cualquier botón.  
Presionar para ajustar el  
reloj, el día o el horario  
Conmutador del sistema  
(
ver las páginas 6 y 11).  
(
ver la página 7).  
Cool: Modo Enfriamiento.  
Off: apagado.  
Presionar para cancelar el  
horario y mantener la  
Heat: Modo Calefacción.  
temperatura (ver la página 13).  
Conmutador del ventilador  
Presionar para activar (seguir)  
el horario (ver la página 9).  
(
ver la página 8).  
On: el ventilador funciona  
continuamente.  
Auto: el ventilador funciona sólo  
cuando la calefacción o el  
enfriamiento están encendidos.  
4
href="
Termostato programable RTH2510  
Referencia rápida para la pantalla  
Indicador de punto de ajuste  
Aparece cuando se visualiza el punto de  
ajuste de la temperatura.  
Cancelación temporaria del horario (ver  
la página 12).  
Indicador de pilas débiles  
ver la página 15).  
(
Cancelación permanente del horario  
ver la página 13).  
Reloj  
Período del horario  
Estado del sistema  
(
Temperatura  
Indica normalmente la temperatura  
ambiente (medida). Para ver la  
temperatura del punto de ajuste,  
presionar el botón Arriba o Abajo una  
vez. La temperatura del punto de ajuste.  
aparecerá durante 5 segundos.  
Cool On: está activado el enfriamiento*.  
Heat On: está activada la calefacción*.  
Aux On: está activada la calefacción auxiliar.  
*
Cuando Heat On o Cool On parpadean, la protección del compresor está activada (ver la página 14).  
5
href="
Manual del usuario  
Ajuste del reloj  
n Presionar el botón Set. En la pantalla aparecerá Set Time y la  
hora parpadeará.  
o Presionar el botón Arriba o Abajo para ajustar la hora.  
p Presionar el botón Set otra vez. En la pantalla parpadeará  
Set Day.  
q Presionar el botón Arriba o Abajo para elegir el día de la  
semana.  
r Presionar el botón Run para salvaguardar los cambios y salir.  
(Las modificaciones se salvaguardan también si no se presiona  
ningún botón durante 60 segundos).  
NOTA: el reloj no está en hora cuando la pantalla de la hora parpadea. Si el termostato  
está siguiendo el horario, usará el ajuste de temperatura programado para el período  
Despertar de los lunes hasta que se vuelva a poner en hora el reloj.  
6
href="
Termostato programable RTH2510  
Conmutador del sistema (Calor/frío)  
Utilizar el conmutador del sistema para poner el  
termostato en uno de los modos siguientes:  
Cool: el sistema está en Modo Enfriamiento.  
Off: el sistema está apagado.  
Heat: el sistema está en Modo Calefacción.  
ADVERTENCIA: PELIGRO DE DAÑAR EL EQUIPO  
No se debe usar el Modo Enfriamiento cuando la temperatura exterior es  
inferior a los 50°F (10°C).  
7
href="
Manual del usuario  
Conmutador del ventilador (Auto/On)  
Usar el conmutador del ventilador (Fan) para  
escoger el funcionamiento del ventilador.  
Auto: el ventilador funciona únicamente cuando  
la calefacción o el enfriamiento están activados  
(ajuste más común).  
On: el ventilador funciona continuamente.  
8
href="
Termostato programable RTH2510  
Uso del horario  
Presionar el botón Run para seguir el horario programado. Para obtener una economía  
máxima conservando el confort, se puede programar el horario de manera que la  
temperatura esté en un nivel económico durante la noche y en un nivel confortable cuando  
los moradores están activos en casa. Se pueden programar hasta cuatro períodos por día:  
Despertar  
Salir  
Comienza al despertar  
Comienza al salir para el trabajo  
Comienza cuando se regresa a la casa  
Comienza a la hora de acostarse  
Regresar  
Dormir  
Para programar un período, debe fijarse la hora del comienzo y los dos ajustes de la  
temperatura (uno cuando el termostato está en Modo Enfriamiento y otro cuando está en  
Modo Calefacción). Se puede fijar un programa diferente para cada día de la semana.  
9
href="
Manual del usuario  
Ajustes de Energy Star®  
Los ajustes de ENERGY STAR® están preprogramados en el termostato para cada día de  
la semana (ver el cuadro abajo). Referirse a la página siguiente si se desea modificarlos.  
Período  
Hora de inicio  
6:00 AM  
Calefacción  
70°F (21°C)  
62°F (16,5°C)  
70°F (21°C)  
62°F (16,5°C)  
Enfriamiento  
78°F (25,5°C)  
85°F (29,5°C)  
78°F (25,5°C)  
82°F (27,5°C)  
Despertar  
Salir  
8:00 AM  
Regresar  
Dormir  
6:00 PM  
10:00 PM  
1
0
href="
Termostato programable RTH2510  
Modificación del horario  
n
Presionar el botón Set 3 veces hasta que se vea Set Schedule. Aparece el  
período Despertar  
.
NOTA: para fijar otro período, presionar el botón Set las veces necesarias hasta  
que el período y el día deseados aparezcan y sus horas y temperaturas parpadeen.  
El Despertar los  
lunes es a las 6  
a.m. y a 70°F.  
o
p
q
Cuando la hora parpadee, presionar Arriba o Abajo para ajustarla.  
Presionar el botón Set.  
Para programar los ajustes de temperatura para el Modo Enfriamiento, colocar  
primero el conmutador del sistema en Cool; para el Modo Calefacción,  
colocar primero el conmutador del sistema en Heat.  
r
s
t
u
Cuando la temperatura parpadee, presionar Arriba o Abajo para ajustarla.  
Presionar el botón Set.  
Para saltear un  
período (excepto  
Despertar),  
presionar Hold por  
cuatro segundos  
mientras se visualiza  
el período que se  
desea saltear.  
Repetir los pasos 2 a 6 para cada uno de los períodos siguientes.  
Una vez hechas las modificaciones, presionar Run para salvar y volver a la  
pantalla normal. (Los cambios se salvaguardan también automáticamente si  
no se oprime ningún botón durante 60 segundos).  
11  
href="
Manual del usuario  
Cancelación temporaria del horario  
Para ignorar temporariamente el horario, presionar el  
botón Arriba o Abajo hasta que se vea la temperatura  
deseada en pantalla. Aparecerá el mensaje Temporary  
y el período en curso parpadeará para indicar que ha  
sido cancelado. La nueva temperatura estará vigente  
hasta que comience el próximo período.  
NOTA: presionando el botón Arriba o Abajo una vez se visualizará el punto de ajuste de la  
temperatura. Para cambiarlo, presionar cualquiera de los dos botones más de una vez.  
Presionar el botón Run si se desea cancelar el ajuste temporario antes de comenzar el  
período siguiente.  
1
2
href="
Termostato programable RTH2510  
Cancelación permanente del horario  
Para cancelar el horario de manera permanente,  
presionar el botón Arriba o Abajo hasta que aparezca  
en pantalla la temperatura deseada. Presionar entonces  
el botón Hold para mantener la nueva temperatura de  
manera indefinida. La palabra Hold aparecerá en la  
pantalla.  
Presionar el botón Run si se desea anular la cancelación y retomar el horario. La palabra  
Hold desaparecerá y el termostato retomará la temperatura programada para el período  
corriente.  
1
3
href="
Manual del usuario  
Adaptive Intelligent Recovery (AIR)  
Adaptive Intelligent Recovery™ permite que el termostato “aprenda” cuánto tiempo le lleva a la  
estufa o al aire acondicionado para alcanzar la temperatura deseada. Sólo hay que programar  
las horas y las temperaturas deseadas en el horario. El termostato determinará cuándo activar la  
calefacción o el enfriamiento para que la temperatura deseada se alcance a la hora establecida.  
Ejemplo: si se fija la hora de Despertar a las 6 a.m. y la temperatura a 70 °F (21 °C), la  
calefacción se encenderá antes de la hora fijada, para alcanzar los 70 °F (21 °C) al despertar a  
las 6 a.m.  
Protección del compresor incorporada  
El termostato tiene una función que protege el compresor del acondicionador de aire o del  
sistema de bomba de calor. El compresor puede dañarse si vuelve  
a encenderse  
inmediatamente después de apagarse. Esta función lo fuerza a esperar 5 minutos antes de  
volver a entrar en funcionamiento. Durante este tiempo, en la pantalla parpadeará el mensaje de  
Cool On o Heat On. Una vez transcurridos los 5 minutos de seguridad, el mensaje dejará de  
parpadear y el compresor se pondrá en marcha.  
1
4
href="
Termostato programable RTH2510  
Reemplazo de las pilas  
Poner el conmutador del sistema en OFF antes de retirar las pilas. De lo  
contrario, el sistema de calefacción/enfriamiento puede permanecer activado  
aun cuando se hayan sacado las baterías.  
Instalar dos pilas AAA nuevas cuando Lo Batt parpadee  
en la pantalla. El icono aparecerá 60 días antes de que  
las pilas estén completamente descargadas.  
Reemplazar las pilas una vez por año o luego de una  
ausencia de más de un mes.  
La mayor parte de los datos de la configuración están  
almacenados en la memoria no volátil (permanente).  
Sólo el reloj y la fecha deben ajustarse después del  
reemplazo de las pilas.  
1
5
href="
Manual del usuario  
En caso de dificultades  
No aparece nada en la pantalla.  
Verificar que las dos pilas AAA estén cargadas y correctamente instaladas.  
El conmutador del sistema está apagado (Off).  
La temperatura está fuera del margen permitido:  
No puede modificarse la  
temperatura.  
Calefacción: 40 °F a 90 °F (4,5 °C a 32 °C)  
Enfriamiento: 50 °F a 99 °F (10 °C a 37 °C)  
Cool On o Heat On parpadean.  
El lapso de protección del compresor está en curso y hay que esperar que  
termine (máximo de 5 minutos).  
HI aparece en la pantalla.  
LO aparece en la pantalla  
E1 aparece en la pantalla.  
La temperatura ambiente (medida) es superior a 122 °F (50 °C).  
La temperatura ambiente (medida) es inferior a 32 °F ( 0 °C).  
El circuito de temperatura de la sonda está abierto. Hay que reemplazar el  
termostato  
E2 aparece en la pantalla.  
La sonda de temperatura está en corto circuito. Reemplazar el termostato.  
1
6
href="
Termostato programable RTH2510  
Asistencia al cliente  
Para obtener asistencia con este producto, se recomienda visitar el sitio  
http://DIYthermostats.honeywell.com o llamar al Servicio de Asistencia  
al Cliente de Honeywell al número sin cargo 1-800-468-1502.  
Para ahorrar tiempo, proceder de la siguiente manera antes de llamar:  
1)  
2)  
3)  
Aflojar el tornillo en la base del termostato. El tornillo está cautivo y  
no se podrá retirar de la placa mural.  
Separar el termostato de la placa mural, como se indica en la figura  
de la derecha.  
Anotar el número de modelo y el código de la fecha que figuran en la  
placa mural del termostato.  
1
7
href="
Manual del usuario  
Garantía limitada de un año  
Honeywell garantiza este producto, a excepción de la batería, por el término de un (1) año contra cualquier  
defecto de fabricación o de los materiales, a partir de la fecha de compra por parte del consumidor, en  
condiciones normales de uso y servicio. Si en cualquier momento durante el período de garantía se verifica  
que el producto tiene un defecto o mal funcionamiento, Honeywell lo reparará o reemplazará (a elección de  
Honeywell).  
Si el producto tiene defectos,  
(
i) devuélvalo, con la factura de venta u otra prueba de compra fechada, al lugar donde lo compró; o  
ii) comuníquese con el Centro de atención al cliente de Honeywell al 1-800-468-1502. El servicio de  
atención al cliente decidirá si se debe devolver el producto a la siguiente dirección: Devolución de  
mercaderías de Honeywell, Dock 4 MN10-3860, 1885 Douglas Dr. N., Golden Valley, MN 55422, o si se le  
puede enviar un producto en reemplazo.  
(
Esta garantía no cubre los costos de extracción o reinstalación. Esta garantía no se aplicará si Honeywell  
demuestra que el defecto o mal funcionamiento estaba causado por daños ocurridos mientras el producto  
estaba en posesión de un consumidor.  
1
8
href="
Termostato programable RTH2510  
La única responsabilidad de Honeywell será reparar o reemplazar el producto dentro de los plazos  
establecidos anteriormente. HONEYWELL NO RESPONDERÁ POR LA PÉRDIDA O DAÑO DE NINGÚN  
TIPO, INCLUIDO EL DAÑO INCIDENTAL O INDIRECTO DERIVADO, DIRECTA O INDIRECTAMENTE, DEL  
INCUMPLIMIENTO DE LAS GARANTÍAS, EXPRESAS O IMPLÍCITAS, O DE OTRAS FALLAS DE ESTE  
PRODUCTO. Algunos estados no permiten la exclusión o limitación del daño incidental o indirecto, entonces,  
esta limitación puede no resultar aplicable a su caso.  
LA PRESENTE GARANTÍA ES LA ÚNICA GARANTÍA EXPRESA QUE HONEYWELL PROPORCIONA  
RESPECTO DE ESTE PRODUCTO. LA DURACIÓN DE LAS GARANTÍAS IMPLÍCITAS, INCLUIDAS LAS  
GARANTÍAS DE COMERCIABILIDAD Y APTITUD PARA UN OBJETIVO PARTICULAR, ESTA LIMITADA A  
LA DURACIÓN DE UN AÑO DE LA PRESENTE GARANTÍA.  
Algunos estados no permiten las limitaciones sobre la duración del período de una garantía implícita,  
entonces la limitación anterior puede no resultar aplicable a su caso. Esta garantía le brinda derechos legales  
específicos, y usted podrá tener otros derechos que varían según el estado.  
Si tiene preguntas sobre la presente garantía, sírvase escribir a Honeywell Customer Relations, 1985  
Douglas Dr, Golden Valley, MN 55422 o llamar al 1-800-468-1502. En Canadá, escriba a Retail Products  
ON15-02H, Honeywell Limited/Honeywell Limitée, 35 Dynamic Drive, Scarborough, Ontario M1V 4Z9.  
1
9
href="
.
Sistemas para automatización y control  
Honeywell International Inc.  
1
985 Douglas Drive North  
Golden Valley, MN 55422  
Honeywell Limited  
3
5 Dynamic Drive  
Scarborough, Ontario M1V 4Z9  
Impreso en EE.UU.  
6
9-2381ES-01  
10-09