Honeywell 6000 Series Thermostat User Manual

Home

href="
IꢀSTꢁllꢂR SySTꢂꢅ TꢂST  
IꢀSTꢁllꢂR SySTꢂꢅ TꢂSTS  
®
®
FocusPRO 6000 Series  
Test the system’s heating, emergency heat, cooling, and fan.  
Available tests vary by thermostat and system type.  
FocusPRO 5000 Series  
1.  
To begin, press and hold the s and t buttons until the  
1.  
To begin, press and hold the s and t buttons until the  
Table 2. Installer System Test  
display changes.  
display changes.  
System Test  
Number  
Test Type  
System Status Number  
and Description  
10  
Heating system  
0
Heat and fan off  
1
First stage heat  
on (Fan turns on if  
Setup Function 1 is  
set to 1, 5, 9, or 10  
OR setup Function  
®
FocusPRO 5000  
3
is set to 1)  
2
3
Second stage heat  
and 6000 Series  
Thermostats  
on  
Third stage heat  
on  
2
0
0
Emergency  
heating system  
0
1
2
Heat and fan off  
Heat and fan on  
Second stage heat  
2.  
Presss/t to turn system on/off.  
2.  
Presss/t to turn system on/off.  
(Aux. heat) turns on  
System test  
number  
System status  
number  
System test  
number  
System status  
number  
3
Cooling system  
Fan system  
0
1
2
Compressor and  
fan off  
Compressor and  
fan on  
Second stage  
compressor on  
IꢀSTꢁllꢂR SꢂTꢃP ꢁꢀꢄ  
SySTꢂꢅ TꢂST POꢆkꢂT GꢃIꢄꢂ  
0
0
1
0
10  
40  
0
1
Off  
On  
Done  
Next  
Done  
Next  
caution  
EQUIPMENT DAMAGE HAZARD.  
Compressor protection is bypassed during testing.  
To prevent equipment damage, avoid cycling the  
compressor quickly.  
3.  
4.  
5.  
Press NEXT to advance to next test.  
Press DONE to terminate system test.  
Proceed to Installer System Tests on page 8.  
3.  
4.  
5.  
Press NEXT to advance to next test.  
Press DONE to terminate system test.  
Proceed to Installer System Tests on page 8.  
6
9-2026  
6
7
8
href="
IꢀSTꢁllꢂR SꢂTꢃP  
IꢀSTꢁllꢂR SꢂTꢃP FꢃꢀꢆTIOꢀS  
Available option and default settings vary by thermostat.  
®
®
FocusPRO 6000 Series  
FocusPRO 5000 Series  
Table 1. Installer Setup  
Table 1. Installer Setup  
Setup functions  
Setting & Options  
Setup functions  
Setting & Options  
1.  
To begin, press and hold the s and FAN buttons until  
1.  
To begin, press and hold the s and FAN buttons until  
(factory default in bold)  
(factory default in bold)  
the display changes.  
the display changes.  
1
System type  
0
1
1 heat / 1 cool Conv.  
1 heat / 1 cool heat  
pump (no Aux. heat)  
Heat only (2-wire, 3-wire  
zone valves [Series 20],  
and normally open zone  
valves)  
8
Emergency heat  
cycle rate  
9
1
3
Electric emergency heat  
Steam or gravity  
Hot water systems or fur-  
naces of 90%+ efficiency  
Gas or oil furnaces of  
less than 90% efficiency  
[Other options: 1–12]  
2
5
3
3
3
4
5
Heat only with fan  
Cool only  
9
1
First stage  
compressor cycle  
rate  
Recommended  
[Other options: 1–6]  
2 heat / 1 cool heat  
pump (with Aux. heat)  
2 heat / 2 cool Conv.  
2 heat / 1 cool Conv.  
1 heat / 2 cool Conv.  
2 heat / 2 cool heat pump  
0
Second stage  
compressor cycle  
rate  
Recommended  
[Other options: 1–6]  
6
7
8
9
2.  
Press s or t to change settings.  
2.  
Press s or t to change settings.  
12  
Manual/Auto  
changeover  
0
1
2
Manual changeover  
(Heat/Cool/Off)  
Auto changeover (Heat/  
Cool/Auto/Off)  
(no Aux. heat)  
Function  
Setting  
Function  
Setting  
10  
3 heat / 2 cool heat  
pump (with Aux. heat)  
Auto changeover only  
2
3
Changeover valve  
0
1
Controls valve in cooling  
Controls valve in heating  
(Auto)  
(O/B terminal)  
13  
Adaptive Intel-  
ligent Recovery  
1
0
On  
Off  
Fan control  
(heating)  
0
Gas/Oil heat (equipment  
controls heating fan)  
Electric furnace (thermo-  
stat controls heating fan)  
TM  
0
0
1
1
1
14  
15  
Temperature  
display  
0
1
Fahrenheit  
Celsius  
Done  
Next  
Done  
Next  
5
First stage heat  
cycle rate  
5
Gas or oil furnaces of  
less than 90%  
Compressor  
protection  
5
5-minute compressor  
off time  
Printed in U.S.A. on recycled  
paper containing at least 10%  
post-consumer paper fibers.  
efficiency  
Steam or gravity  
Hot water systems or fur-  
naces of 90%+ efficiency  
Electric furnaces  
[Other options: 0–4  
minutes]  
1
3
3.  
4.  
5.  
Press NEXT to advance to the next function.  
Press DONE to exit and save settings.  
Proceed to Installer Setup Functions on page 4.  
3.  
4.  
5.  
Press NEXT to advance to the next function.  
Press DONE to exit and save settings.  
Proceed to Installer Setup Functions on page 4.  
1
6
Schedule format  
0
5/2 (weekdays  
and weekends  
programmable)  
5/1/1 (weekdays,  
Saturday, and Sunday  
programmable)  
Automation and Control Solutions  
9
Honeywell International Inc.  
[
Other options: 1–12]  
1
1
985 Douglas Drive North  
6
7
Second stage  
heat/Aux heat  
cycle rate  
5
Gas or oil furnaces of  
less than 90% efficiency  
Steam or gravity  
Hot water systems or fur-  
naces of 90%+ efficiency  
Electric furnaces  
Golden Valley, MN 55422  
1
3
2
6
7
Auxiliary heat  
control  
0
1
Comfort  
Economy  
2
Heat temperature 90  
range stops  
Max. heat temperature  
setting is 90°F (32°C)  
Honeywell Limited-Honeywell Limitée  
35 Dynamic Drive  
9
[
Other options: 1–12]  
[
(
Other options: 40–89°F  
4.5°C to 32°C)]  
Auxiliary heat  
cycle rate  
5
Gas or oil furnaces of  
less than 90% efficiency  
Steam or gravity  
Hot water systems or fur-  
naces of 90%+ efficiency  
Electric furnaces  
Toronto, Ontario M1V 4Z9  
28  
Cool temperature 50  
range stop  
Min. cool temperature  
setting is 50°F (10°C)  
1
3
[
(
Other options: 51–99°F  
10.5°C to 37°C)]  
® U.S. Registered Trademark  
9
© 2006 Honeywell International Inc.  
US Patent No. 6595430, D509151; other  
Patents Pending. All Rights Reserved  
69-2026 M.S. 09-06  
[
Other options: 1–12]  
Functions 13 and 16 only available on the 6000 series;  
function 26 only available on the 5000 series  
2
3
4
5

Lennox 2P1109 Thermostat User Manual

Bryant T2 PAC Thermostat User Manual

Honeywell TH3000 Thermostat User Manual

Honeywell TH400 Thermostat User Manual

Honeywell T8131B Thermostat User Manual

Emerson 1F86 0244 Thermostat User Manual

Honeywell TH8110U1003 Thermostat User Manual

Honeywell T8775A,C Thermostat User Manual

Honeywell T841B Thermostat User Manual

Lennox XC2105 Thermostat User Manual