Honeywell T8024 Thermostat User Manual

Home

T8000, T8001,T8002, T8011, T8024

Programmable Thermostats

OWNER’S GUIDE

9-1431-1

69-1431–1

Welcome to the world of comfort and energy

savings with your new Honeywell program-

mable thermostat.

Features

•

Program up to four time periods with

temperature settings to complement

your lifestyle.

Your new programmable thermostat is designed

to provide you with reliable, precise temperature

control. When you follow the simple program-

ming instructions in this manual, your thermostat

automatically controls the temperature in your

home, saving energy and allowing you to awake

•

Set different schedules for weekdays and

weekend.

Programs permanently held in nonvolatile

memory in event of power failure.

Indefinite temperature hold.

Preprogrammed for your convenience.

Backlit display (select models).

•

(or return home) to a comfortable level of heating

or air conditioning.

If you have questions, visit our web site at

www.honeywell.com/yourhome, or call the

customer information line at 1-800-468-1502.

69-1431–1

Contents

Features .......................................................................................................................................... 2

Key Locations and Descriptions ...................................................................................................... 4

Planning Program Schedule ........................................................................................................... 5

Program Schedule...................................................................................................................... 6

Programming Thermostat ............................................................................................................... 7

Setting Current Time and Day .................................................................................................... 8

Setting Weekday Program .......................................................................................................... 9

Setting Weekend Program ......................................................................................................... 10

Setting Temporary Temperature Hold ......................................................................................... 13

Setting Indefinite Temperature Hold ........................................................................................... 13

Operating Thermostat ..................................................................................................................... 13

Setting SYSTEM and FAN Switches .......................................................................................... 13

Replace the Batteries (T8002 Only)........................................................................................ 14

Backlighting (Select Models)................................................................................................... 14

Minimum Off-Timing ........................................................................................................................ 15

Troubleshooting .............................................................................................................................. 16

Customer Assistance ...................................................................................................................... 19

Warranty.......................................................................................................................................... 20

69-1431–1

Key Locations and Descriptions

HOLD KEY

INCREASE ▲ KEY

PROGRAM TIME AND TEMPERATURE.

SET TEMPORARY TEMPERATURE

HOLD.

SELECT KEY

• SET TEMPORARY TEMPERATURE HOLD.

•

• CURRENT SETPOINT.

• CHANGE DAY AND TIME.

• PROGRAM SELECTIONS.

INCREASE ▲ KEY

•

PROGRAM TIME AND TEMPERATURE.

SET TEMPORARY TEMPERATURE HOLD.

SELECT KEY

•

CURRENT SETPOINT.

CHANGE DAY AND TIME.

PROGRAM SELECTIONS.

T8000,T8001

T8011,T8024

MODELS

TUE

Hold

Select

T8002 MODEL

Ft oA NO n

FAN

Auto On

Cool Off Heat

SYSTEM

Cool Off Heat

SYSTEM

FAN SWITCH

BATTERY

DOOR

SYSTEM SWITCH

DECREASE ▲ KEY

• PROGRAM TIME AND TEMPERATURE.

• SET TEMPORARY TEMPERATURE HOLD.

SYSTEM SWITCH

HOLD KEY

SET TEMPORARY TEMPERATURE HOLD.

•

M14673

69-1431–1

Table 1. Preprogrammed Time

and Temperature Settings.

Planning Program Schedule

The thermostat display shows day, time,

program period, and temperature.

Heat

Setpoint

Cool

Setpoint

Period

Time

Wake

6:00 AM

70°F

21°C)

78°F

(26°C)

The thermostat can be set for four time

periods per day for weekdays and weekend.

(

Leave 8:00 AM

Return 6:00 PM

Sleep 10:00PM

62°F

17°C)

85°F

(29°C)

(

Before programming the thermostat, you can

use the program schedule to plan your

program.

70°F

(21°C)

78°F

(26°C)

62°F

17°C)

82°F

(28°C)

Fill in the weekday and weekend times and

temperatures you desire. If you decide not to

program the thermostat, it uses the

preprogrammed time and temperature settings

in Table 1.

(

69-1431–1

Program Schedule

Weekday

Start Time

Heating Temperature

Cooling Temperature

Wake

Leave

Return

Sleep

________

Weekend

Start Time

Heating Temperature

Cooling Temperature

Wake

Leave

Return

Sleep

________

Wake and Return start times should include extra lead time, based on outside temperature and

equipment response time, to give your equipment a head start to heat or cool the house. The

temperatures cannot be set any higher than 99°F (37°C) or any lower than 40°F (4°C).

69-1431–1

time, to give the equipment a head start to

heat or cool the house before you get up.

Programming Thermostat

(

This will be a higher temperature during

heating season, and a lower temperature

during cooling season.)

The thermostat is flexible and can be program-

med for different schedules for weekdays and the

weekend to meet your lifestyle needs.

Leave is the time period you can set for an

energy-saving temperature while you are

away at work or school. (This will be a

lower temperature during heating season,

and a higher temperature during cooling

season.)

Use the personal Program Schedule for planning

your time and temperature settings for various

times of the day.

Four time periods are available during weekdays

and the weekend—Wake, Leave, Return, and

Sleep.

Return is the time the thermostat turns on the

heating/cooling equipment after an energy

saving period. When deciding what time to

set for your Return period, include extra

lead time, depending on the outside temp-

erature and your equipment response time,

to give the equipment a head start to heat

or cool the house before you arrive home.

Wake is the time the thermostat turns on the

heating/cooling equipment after an energy

saving period. When deciding what time to

set for your Wake period, include extra

lead time, depending on the outside temp-

erature and your equipment response

69-1431–1

Sleep is the time period you can set for an

energy-saving temperature while you are

sleeping. (For more comfortable sleep-

ing, some people choose not to raise the

cool temperature during the night.)

While setting the current time, the word SET is

displayed.

2. To set day of week, press Select again.

Press ▲ or ▲

SET

to set current

day.

IMPORTANT

Always press the keys with your

fingertip or similar blunt tool. Sharp

instruments like pens and pencil

points can damage the keyboard.

M18534

To use the preprogrammed time and tempera-

ture (see Table 1), press Hold to exit the

programming mode.

Setting Current Time and Day

. To set current time, press Select twice.

Press ▲ or ▲

to set current

SET

time.

M12591A

69-1431–1

. Leave

Setting Weekday Program

a. Press Select. Press ▲ or ▲ to set

Slide the SYSTEM switch to the position, Heat

or Cool, you want to program. A flame (heat-

Leave

time.

SET

ing) or a snowflake

(cooling) appears in the

right side of the display, when setting the

program temperature.

M18566

. Wake

b. Press Select. Press ▲ or ▲ to set

a. Press Select. Press ▲ or ▲ to set

Leave

SET

Wake

time.

SET

temp-

erature.

M12627B

M18570

5. Return

b. Press Select. Press ▲ or ▲ to set

a. Press Select. Press ▲ or ▲ to set

Wake

SET

Return

time.

SET

temp-

erature.

M12625C

M18567

69-1431–1

b. Press Select. Press ▲ or ▲ to set

Setting Weekend Program

. Wake

a. Press Select. Press ▲ or ▲ to set

Return

temp-

SET

erature.

Wake

time.

SET

M12629B

6. Sleep

a. Press Select. Press ▲ or ▲ to set

M18569

Sleep

time.

SET

b. Press Select. Press ▲ or ▲ to set

Wake

SET

temp-

M18568

erature.

b. Press Select. Press ▲ or ▲ to set

M12633C

Sleep

SET

temp-

erature.

M12631C

69-1431–1

. Leave

b. Press Select. Press ▲ or ▲ to set

a. Press Select. Press ▲ or ▲ to set

Return

SET

Leave

time.

SET

temp-

erature.

M12637B

10. Sleep

M18550

a. Press Select. Press ▲ or ▲ to set

b. Press Select. Press ▲ or ▲ to set

Sleep

time.

SET

Leave

SET

temp-

erature.

M18554

M12635B

. Return

b. Press Select. Press ▲ or ▲ to set

Sleep

a. Press Select. Press ▲ or ▲ to set

SET

Return

time.

SET

temp-

erature.

M12639C

M18552

69-1431–1

1. Press Select. End is displayed. Program-

Setting Indefinite Temperature Hold

The Hold key allows you to indefinitely hold a

temperature. When Hold is active, the letters

Hld are displayed continuously. Hold can be

canceled by pressing the Hold key again.

ming is complete. The thermostat reverts

to displaying

SET

the current

day time and

temperature in

five seconds.

1. Press Hold

M18556

Setting Temporary Temperature Hold

. Press ▲ or ▲ key to set indefinite

temperature

setting.

. Press ▲ or ▲ key to set a temporary

temperature

TEMPORARY

setting.

WED

M12641A

M12640A

NOTE: The temporary temperature setting

remains in effect until the next program

period. To cancel, press Hold twice.

69-1431–1

Slide the SYSTEM switch in the lower right

corner of the thermostat to select the desired

system setting.

Operating Thermostat

Setting SYSTEM and FAN Switches

Use the SYSTEM and FAN switches to control

thermostat operation.

FAN settings:

Auto: Fan operates with equipment.

On: Fan operates continuously.

SYSTEM settings:

Cool: The thermostat controls the cooling.

Off: Both the heating and cooling are off.

Heat: The thermostat controls the heating.

Em. Ht. (heat pump models only): The

thermostat cycles emergency heat relay

Slide the FAN switch in the lower left corner of

the thermostat to select the desired fan setting.

Heat and Cool Indicators:

Indicates a call for heat.

Indicates a call for cool.

(E) and cycles auxiliary heat (W2), as

needed, to maintain setpoint. Terminal L is

energized continuously (fault heat relay is

on continuously). Compressor is de-

energized.

NOTE: In the programming mode, the

and

indicate system setting.

69-1431–1

The batteries are located on the right side of

the thermostat. Open the battery door from the

bottom, lifting out.

Back Lighting (Select Models)

Any key pressed lights the display for approxi-

mately ten seconds.

If you insert the batteries within approximately

Replacing the Batteries

30 seconds of removing the old batteries, the

(

T8002 Models Only)

thermosat retains the current time and day. If

the display is blank when changing batteries,

reset the time and day. Your program does not

require resetting; it is stored permanently!

The T8002 Thermostat requires three AA

alkaline batteries to operate.

As the batteries run low, your thermostat

shows a "bAt Lo" message in the digital

display. The message flashes for one to two

months before the batteries run out completely.

Replace the batteries as soon as possible after

the message flashes.

Important: Even if you do not see the "bAt Lo"

message, replace the batteries once a year to

prevent leakage and/or the heating/cooling

system from shutting down due to lack of

battey power.

69-1431–1

Minimum Off-Timing

The thermostat minimum off-timer assures that

the compressor does not come on again for at

least five minutes after it turns off. The minimum

off-timer is triggered when the compressor turns

off and when the SYSTEM switch position is

changed. If the compressor turns off when the

setpoint is changed, the minimum off-timer is

triggered. Power interruption and power

The minimum off-timer operates in cooling on

the T8000 and T8001, T8002, T8024 (multi-

stage model) and in first stage heating or

cooling on the T8011 (heat pump model). A

flashing flame or snowflake indicates the

minimum off-time is in effect.

restoration also trigger the minimum off-timer.

69-1431–1

Troubleshooting

Symptom

Action

•

Check if the thermostat is mounted and latched on

the wallplate—mount and latch the thermostat on

the wallplate.

Check if the circuit breaker is tripped—reset the

circuit breaker.

Display does not come on.

•

Check if the fuse is blown—replace the fuse.

Check if the switch at the equipment is in the Off

position—set to the On position.

•

Check if the batteries are good and installed correctly

(T8002 only).

Temperature settings do not

change (example: cannot set the

heating higher or the cooling

lower).

Check that the temperature setpoints are: between

40 to 99°F (4 to 37°C).

continued

69-1431–1

Troubleshooting (Continued).

Symptom

Action

Heating does not come on.

•

Check if the circuit breaker is tripped—reset the

circuit breaker.

•

Check if the fuse is blown—replace the fuse.

Check if the switch at the equipment is in the Off

position—set to On position.

•

Wait five minutes for the system to respond.

Set SYSTEM switch to Heat.

If the temperature setting is higher than the current room

temperature and the flame

is displaying, the

thermostat is operating correctly. Contact a heating

contractor for assistance.

continued

69-1431–1

Troubleshooting (Continued).

Symptom

Action

Cooling does not come on.

•

Check if the circuit breaker is tripped—reset the

circuit breaker.

•

Check if the fuse is blown—replace the fuse.

Check if the switch at the equipment is in the Off

position—set to On position.

•

Wait five minutes for the system to respond.

Set SYSTEM switch to Cool.

If the temperature setting is lower than the current room

temperature and the snowflake

is displaying, the

thermostat is operating correctly. Contact an air

conditioning contractor for assistance.

continued

69-1431–1

Troubleshooting (Continued).

Symptom

Action

System on indicator

Wait a couple minutes after seeing the flame or

snowflake and then check the registers.

is lit, but no warm

or cool air is coming from the

registers.

System on indicator

Minimum off-timer is in effect. Wait five minutes until

the minimum off-timer is complete.

is flashing.

Customer Assistance

If you have any questions concerning the operation of your thermostat, please visit us at www.honeywell.com or

call the thermostat information helpline at 1-800-468-1502.

69-1431–1

Warranty

Honeywell warrants this product, excluding battery, to be free from defects in the workmanship or materials,

under normal use and service, for a period of one (1) year from the date of purchase by the consumer. If, at any

time during the warranty period, the product is defective or malfunctions, Honeywell shall repair or replace it (at

Honeywell’s option) within a reasonable period of time.

If the product is defective,

(

i) return it, with a bill of sale or other dated proof of purchase, to the retailer from which you purchased it, or

ii) package it carefully, along with proof of purchase (including date of purchase) and a short description of

the malfunction, and mail it, postage prepaid, to the following address:

Honeywell Return Goods

Dock 4 MN10-3860

1885 Douglas Drive North

Golden Valley, MN 55422

This warranty does not cover removal or reinstallation costs. This warranty shall not apply if it is shown by

Honeywell that the defect or malfunction was caused by damage which occurred while the product was in the

possession of a consumer.

69-1431–1

Honeywell’s sole responsibility shall be to repair or replace the product within the terms stated above. HONEY-

WELL SHALL NOT BE LIABLE FOR ANY LOSS OR DAMAGE OF ANY KIND, INCLUDING ANY INCIDENTAL

OR CONSEQUENTIAL DAMAGES RESULTING, DIRECTLY OR INDIRECTLY, FROM ANY BREACH OF ANY

WARRANTY, EXPRESS OR IMPLIED, OR ANY OTHER FAILURE OF THIS PRODUCT. Some states do not

allow the exclusion or limitation of incidental or consequential damages, so this limitation may not apply to you.

THIS WARRANTY IS THE ONLY EXPRESS WARRANTY HONEYWELL MAKES ON THIS PRODUCT. THE

DURATION OF ANY IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND

FITNESS FOR A PARTICULAR PURPOSE, IS HEREBY LIMITED TO THE ONE YEAR DURATION OF THIS

WARRANTY. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation

may not apply to you.

This warranty gives you specific legal rights, and you may have other rights which vary from state to state.

If you have any questions concerning this warranty, please write Honeywell Customer Relations, 1985 Douglas

Dr N, MN10-1451, Golden Valley, MN 55422. In Canada, write Retail Products ON15, Honeywell Limited/

Honeywell Limitée, 35 Dynamic Drive, Scarborough, Ontario M1V 4Z9.

69-1431–1

Automation and Control Solutions

Honeywell

Honeywell Limited-Honeywell Limitée

985 Douglas Drive North

Golden Valley, MN 55422

35 Dynamic Drive

Scarborough, Ontario

M1V 4Z9

Printed in U.S.A. on recycled

paper containing at least 10%

post-consumer paper fibers.

69-1431–1 Rev. 5-02 G.H.

www.honeywell.com/yourhome

69-1431–1

Honeywell T4039B Thermostat User Manual

Honeywell T7984 B Thermostat User Manual

Lux Products ELV4C Thermostat User Manual

Honeywell Q7100A Thermostat User Manual

Honeywell V4062B Thermostat User Manual

White Rodgers 1F82 0261 Thermostat User Manual

White Rodgers 750 Thermostat User Manual

White Rodgers 927 Thermostat User Manual

White Rodgers 903992 Thermostat User Manual

White Rodgers 1E78 151 Thermostat User Manual