F61 Series
Adaptor Plate Assembly
INSTALLATION INSTRUCTIONS
WHITE-RODGERS
Operator: Save these instructions for future use!
FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY
BEFORE INSTALLING OR OPERATING THIS CONTROL COULD CAUSE
PERSONAL INJURY AND/OR PROPERTY DAMAGE.
DESCRIPTION
This adaptor plate assembly is designed for mounting a
1F6X, 1F7X, or 1F9X series thermostat to the wall or to a
junction box. The wall cover plate covers the junction box,
wall damage, or old thermostat markings. The adaptor
plateisdesignedtoallowhorizontalthermostatmounting,
regardless of junction box orientation.
Adaptor Plate
5
” Phillips
16
All kits may not have adaptor plate or all screws shown.
No. 6 X
pan-head screw (2)
⁄
3
⁄ ” Phillips
8
6-19 X
pan-head screw (3)
3
⁄ ” flat-head
4
Wall Cover
Plate
6-32 X
machine screw (4)
PRECAUTIONS
CAUTION
NOTE
!
To prevent electrical shock and/or equip-
ment damage, disconnect electrical power
at main fuse or circuit breaker until installa-
tion is complete.
This instruction sheet is not intended as a wiring guide.
Refer to the thermostat installation instructions to ensure
proper wiring.
CONTENTS
Description ......................................................... 1
Precautions ........................................................ 1
Installation.......................................................... 2
For 1F9X Digital Thermostats
For 1F7X Quartz Clock Thermostats
For 1F6X Thermostats
WHITE-RODGERS DIVISION
EMERSON ELECTRIC CO.
9797 REAVIS ROAD
PART NO. 37-5148B
Printed in U.S.A.
Replaces 37-5148A
9607
ST. LOUIS, MISSOURI 63123-5398