Home

href="
®
ELECTRONIC THERMOSTAT  
Owner ’s Manual  
MODEL 8552  
5
-2 Day Programmable  
Thermostat  
href="
OWNER’S MANUAL – TABLE OF CONTENTS  
®
Energy Star Program Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1  
Setting Or Changing The Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3  
Setting Or Changing The Weekday Program For Heating Mode . . . . . . . . . . . . . . . . . . . . . . . . . 5  
Program Schedule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6  
Setting Or Changing The Weekend Program For Heating Mode . . . . . . . . . . . . . . . . . . . . . . . . . 9  
Setting Cooling Temperatures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
Reviewing Programmed Time Schedules And Temperature Settings . . . . . . . . . . . . . . . . . . . . 12  
To Start Running The Program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12  
For Best Performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
Thermostat Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
Temperature Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15  
Time Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16  
Equipment Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17  
Optional Settings For Additional Thermostat Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19  
In Case Of Power Failure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25  
Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25  
Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26  
©
Research Products Corporation 2000  
href="
®
Energy Star Program Information  
About half of all energy used by households goes to heating and cooling the  
®
home. By selecting a programmable Aprilaire Electronic Thermostat, you  
have made a significant step toward conserving energy usage and costs,  
while improving your indoor comfort.  
®
In fact, the Aprilaire Electronic Thermostat Model 8552 has earned the “Energy Star ” designation  
of the U.S. Environmental Protection Agency (EPA). This means that your Aprilaire Thermostat is a  
highly efficient, cutting edge product that is good for the environment. It saves energy and costs less  
to operate than similar products that do not qualify for the Energy Star label.  
Energy Star products help you differentiate between standard efficiency and high efficiency products.  
By using Energy Star products you are helping to prevent air pollution while saving money on your  
utility bills.  
According to the EPA, taking advantage of the times that a home is unoccupied or the occupants  
are asleep, an Energy Star thermostat can reduce heating and cooling bills by as much as 30%. The  
Aprilaire Thermostat has programmable capabilities that allow you full flexibility to set your heating  
and cooling systems to meet your comfort and energy needs. As an Energy Star partner, Research  
Products has determined that this product meets the Energy Star guidelines for energy efficiency.  
1 –  
href="
As part of the Energy Star program, your thermostat has been programmed with the following times and  
temperatures. This has been done to achieve energy efficiency and lower energy bills. If you need to  
modify your program schedule, see page 6.  
TIME SCHEDULE  
THERMOSTAT  
SYMBOL  
DESIRED  
TEMPERATURE  
SETTING  
EVENT  
Mon Tue Wed Thu  
Fri  
Sat Sun  
Morning  
Heat = 70˚  
Cool = 78˚  
6:00 6:00 6:00 6:00 6:00 6:00 6:00  
am am am am am am am  
Day  
Evening  
Night  
Heat = 62˚  
Cool = 85˚  
8:00 8:00 8:00 8:00 8:00 8:00 8:00  
am am am am am am am  
Heat = 70˚  
Cool = 78˚  
5:00 5:00 5:00 5:00 5:00 5:00 5:00  
pm pm pm pm pm pm pm  
Heat = 62˚  
Cool = 82˚  
10:00 10:00 10:00 10:00 10:00 10:00 10:00  
pm pm pm pm pm pm pm  
2 –  
href="
IMPORTANT: READ ALL INSTRUCTIONS THOROUGHLY  
Programming your Aprilaire Thermostat is done in three easy steps: setting the clock, setting the event  
times, and setting your desired temperatures.  
Setting Or Changing The Clock  
Step 1: If you are currently in Daylight Saving Time  
(first Sunday in April thru fourth Sunday in October),  
press the DST button and “ “ will appear in the  
lower right-hand corner of the display.  
Step 2: Press the CLOCK button and “Mo”  
(or another day of the week) will flash. Use the  
DECREASE or INCREASE button to  
change the flashing symbol to the current day  
of week.  
3 –  
href="
Step 3: Press the CLOCK button again and “12: (hours)  
and “AM” or “PM” will flash. Use the DECREASE or  
INCREASE button to change the flashing symbol  
to the current hour making sure the hour has the proper  
AM or PM designation.  
Step 4: Press the CLOCK button and “:00” (minutes) will  
flash. Use the DECREASE  
or INCREASE  
button  
to change the flashing symbol to the current minute.  
Step 5: Press the CLOCK button again. The clock is now  
set and the current time appears on the display.  
4 –  
href="
Setting Or Changing The  
Weekday Program For Heating Mode  
Programming your Aprilaire Electronic Thermostat involves selecting the temperature you want  
in your home and selecting the time you want it to be that temperature. Your Aprilaire Thermostat  
will allow a maximum of 4 time schedules per day. Each time schedule is known as an “event .” The  
Morning event is typically when you wake up and is the first event of the day. The Day event is typically  
set when you leave for work. The Evening event is typically set when you come home from work and  
the Night event is set when you go to bed. Each event will have 2 temperatures, 1 heating temperature  
and 1 cooling temperature. The cooling temperature must be at least 2 degrees higher than the heating  
temperature. Your Aprilaire Thermostat allows 1 program for Monday through Friday and 1 program for  
Saturday and Sunday. Complete the chart on page 6 with your desired temperatures and time schedules  
before beginning programming:  
NOTE: It will take some time for your heating or cooling system to reach the desired temperature  
when returning from a setback. Therefore, it is suggested you set your program time before the actual  
time you want your home to reach the desired temperature. For example, if you get up at 7:00 AM and  
have a 6 degree setback, set your Morning event at 6:00 AM to be sure the desired temperature is  
reached by 7:00 AM.  
5 –  
href="
PROGRAM SCHEDULE  
TIME SCHEDULE  
THERMOSTAT  
SYMBOL  
DESIRED  
TEMPERATURE  
SETTING  
MONDAY – SATURDAY &  
FRIDAY SUNDAY  
EVENT  
Morning  
Heat =  
Cool =  
Day  
Evening  
Night  
Heat =  
Cool =  
Heat =  
Cool =  
Heat =  
Cool =  
NOTE: While programming you must press a button at least every 15 seconds or the thermostat will revert back to the  
operational mode. If this happens, simply repeatedly press the PROGRAM button until you get back to where you left  
off. The information you have already entered has been retained.  
NOTE: If consecutive events have the same temperature, you can skip an event by simultaneously pressing the  
PROGRAM and MODE buttons. Press and release the PROGRAM button to advance to the next event.  
6 –  
href="
Step 1: Press and release the MODE button until the word  
HEAT” and the “ ” heating symbol appear on the display.  
Step 2: Press and release
PROGRAM button – “Mo T
We Th Fr”; Morning event  
symbol “  
”;  
flashing “12:” (or some  
other hour); and flashing “AM” or “PM” will appear on the  
display. You are now setting the time you want your heating  
or cooling equipment to come on in the morning.  
Step 3: Press the DECREASE  
button or INCREASE  
” even
button to set the desired hour for the Morning “  
Step 4: Press and release the PROGRAM button – “:00”  
or some other minutes) will flash.  
(
7 –  
href="
Step 5: Press the DECREASE  
button or INCREASE  
button to set the desired minutes for the Morning “  
event (program starting times are set in ten-minute  
increments).  
Step 6: Press and release the PROGRAM button – the current  
heating temperature will begin to flash. You are now setting  
the heating temperature you desire in the morning.  
Step 7: Press the DECREASE  
button or INCREASE  
” event.  
button to set the desired heating temperature for the Morning “  
Step 8: Press and release the PROGRAM button – the Day “  
” event symbol will appear. You are  
now setting the time and heating temperature you want throughout the day.  
Step 9: Repeat steps 2-6 to complete programming for the Day “  
Step 10: Press and release the PROGRAM button – the Evening “  
” event.  
” event symbol will appear.  
You are now setting the time and heating temperature you want during the evening.  
8 –  
href="
Step 11: Repeat steps 2-6 to complete programming for the Evening “  
” event.  
Step 12: Press and release the PROGRAM button – the Night  ” event symbol will appear.  
You are now setting the time and heating temperature you want at night.  
Step 13: Repeat steps 2-6 to complete programming for the Night  ” event.  
Setting Or Changing The  
Weekend Program For Heating Mode  
Step 1: After setting the Night  ” event Weekday program, press and release the PROGRAM button.  
Sa Su”; the Morning “  
” event symbol; flashing  
12:” (or some other hour); and flashing “AM” or “PM will  
appear on the display. You are now programming the time  
and temperatures for the weekend.  
Step 2: Repeat steps 2-6 identical to Weekday  
programming for Morning  ”,  
Evening  ”, and Night  ” events for  
heating mode as applicable.  
”, Day “  
9 –  
href="
Setting Cooling Temperatures  
NOTE: Cooling temperatures must be set at least 2 degrees higher than heating temperatures.  
(Example: If heating temperature is set at 70˚F, cooling temperature must be set to at least 72˚F or higher.)  
If not set at least 2 degrees higher, the thermostat will automatically lower the previously programmed  
heating temperature to maintain the 2 degree separation.  
NOTE: Your event starting times are the same in the cooling mode program as the heating mode start  
times. Example: If your program start time for the Morning “  
cooling start time is already programmed for 7:00 AM as  
well. Once you change the program starting time for an  
event, the thermostat automatically  
” event is 7:00 AM for heating, the  
changes the starting time for both the heating and  
cooling modes.  
Step 1: Press and release the MODE button until  
the word “COOL” and the “  
” cooling symbol  
appear on display.  
10 –  
href="
Step 2: Press and release the PROGRAM button – “Mo Tu  
We Th Fr”; Morning ”event symbol; and flashing  
starting time you programmed will appear on the display.  
Step 3: Press and release the PROGRAM button repeatedly  
until the temperature flashes.  
Step 4: Press the DECREASE  
button or INCREASE  
button to set the desired cooling temperature (for the morning  
event). You are now setting the cooling temperature you  
want in the morning.  
Step 5: Repeat steps 2-4 for the Day “  
”,  
Evening  ”, and Night  ” events.  
Step 6: After selecting the cooling temperature for the  
Weekday Night  ” event, press and release the  
PROGRAM button. “Sa Su”; Morning “  
” event  
symbol; and flashing starting time you programmed will appear o
11 –  
href="
Step 7: Press and release the PROGRAM button until the temperature for the Morning “  
” event  
flashes. Repeat steps 2-4 for the Morning “  
Night  ” events.  
”, Day “  
”, Evening “  
”, and  
Reviewing Programmed Time Schedules  
And Temperature Settings  
Step 1: Press and release the MODE button repeatedly to advance to the desired mode  
(heating or cooling).  
Step 2: Press and release the PROGRAM button repeatedly to advance to “Mo Tu We Th Fr”, or “Sa Su”  
and specific event. Continue pressing the PROGRAM button to review the time schedules and  
temperature settings for each desired event.  
To Start Running The Program  
After all temperatures and start times have been programmed, press and release the RESUME button  
to start running programs. If no button is pressed thermostat will resume automatically in approximately  
15 seconds.  
12 –  
href="
For Best Performance  
®
The Aprilaire Model 8552 thermostat is designed for accurate temperature control and easy  
operation. The following guidelines should be followed to ensure proper operation of the thermostat:  
1. When the thermostat is operating, close the cover to allow for proper air circulation over the  
temperature sensor.  
2. Do not place anything which can give off warm or cool air, such as candles or portable  
humidifiers, near the thermostat.  
3
. Although the thermostat is internally equipped to prevent short cycling of the furnace and air  
conditioner, it is possible to inadvertently override this protection. Do not start, stop, and restart  
the equipment without allowing a minimum of 2 minutes between heating or cooling cycles.  
Thermostat Operation  
The Model 8552 is a full-featured thermostat which allows for additional control and operations after  
basic time and temperature programming is completed. In addition to the programming buttons used to  
set up all event times and temperatures, additional buttons control the following functions:  
13 –  
href="
14 –  
href="
TEMPERATURE CONTROL  
Reading the Actual Room Temperature: The Model 8552 normally displays the room temperature,  
not the set-point temperature.  
Check the Set-Point Temperature: Press and release the DECREASE  
button. The thermostat will display the programmed set-point temperature and a thermometer for  
seconds before automatically returning to the actual room temperature display.  
button or INCREASE  
5
Temporarily Override the Set Temperature: Press and hold the DECREASE  
button or  
INCREASE button to change the room set-point temperature in 1 degree increments.  
The new set-point temperature will be held for 3 hours, then the thermostat will automatically  
return to the program.  
Hold a New Temperature Set Point: Press and hold the DECREASE  
button or INCREASE  
button to change the room set-point temperature in 1 degree steps. The new set-point temperature  
can be maintained indefinitely by pressing and releasing the HOLD button. The word “HOLD will  
be displayed. The thermostat will maintain this new set-point temperature until the RESUME button  
is pressed returning the thermostat to the original program. This procedure is typically used during  
extended vacant periods (vacations, business trips, etc.), to hold an economical set point until  
you return.  
– 15 –  
href="
Returning to Programmed Operation: At any time, press the RESUME button to return the  
thermostat to operate as programmed.  
Change Between °C and °F : The thermostat has the capability of displaying either Celsius or  
Fahrenheit temperatures. If the displayed temperature seems abnormally high or low  
(ie: 70˚F = 21˚C) you may need to switch to ˚C or ˚F by simultaneously pressing the  
DECREASE button and the INCREASE button.  
Checking the Outdoor Temperature: If your thermostat was installed with the optional  
Aprilaire Outdoor Temperature Sensor, simply press the OUTDOOR button and the thermostat  
will display the outdoor temperature for 3 seconds before automatically returning to the  
actual room temperature display.  
TIME CONTROL  
Change From 12- to 24-Hour Clock: Press and release the CLOCK button, then press the MODE  
button. To return to a standard clock, repeat the process.  
16 –  
href="
EQUIPMENT CONTROL  
Turning on the Fan: At any time the system fan can run continuously by pressing the FAN button.  
Note that a Fan icon, “ “, appears in the lower part of the display indicating that the fan is  
continuously operating. To return the fan to the normal operating mode, press the FAN button again  
which will remove the icon from the display. In the normal operating mode the fan will only run when  
the heating or air conditioning is operating. Continuous fan operation is beneficial if your system is  
equipped with a high efficiency air cleaner or a humidifier, or to circulate air in the home when  
neither heating nor air conditioning is needed. For some heat-only systems, continuous fan operation  
may not be an option.  
Selecting Cooling Mode: Press the MODE button until the word "COOL" appears on the display.  
In this mode the air conditioning system will maintain temperature according to the programming  
previously completed unless an override temperature has been entered. Note that a Snowflake icon,  
“, is on the display, which flashes when the air conditioning is running.  
Selecting Heating Mode: Press the MODE button until the word "HEAT" appears on the display.  
In this mode the heating system will maintain temperature according to the programming previously  
17 –  
href="
completed unless an override temperature has been entered. Note that a Flame icon,  “ is on the  
display, which flickers when the furnace is running.  
Automatic Heating and Cooling: This mode can be useful during times of the year and in climates  
when it is cool at night requiring heating but warm in the afternoon requiring cooling. Press and  
release the MODE button until the word "AUTO" appears on the display. In this mode the cooling  
and heating system will maintain temperature according to the programming previously completed  
unless an override temperature has been entered. The heating and cooling systems will not operate  
at the same time. Either will turn on depending on which programmed set point is closest to the  
room temperature. Note that both the Snowflake, “  
“, and Flame, “ “, icons are on the  
display. The Snowflake will flash or the Flame will flicker depending on which equipment is running.  
Turning the System Off: Press the MODE button until the word "OFF" appears on the display. In this  
mode neither heating or air conditioning will operate regardless of the temperature. The thermostat  
can still be programmed, the optional outdoor temperature sensor will work and the furnace fan  
will turn on if the FAN button is pressed. To avoid frozen water pipes, DO NOT use the OFF mode for  
long periods of time during sub-freezing temperatures.  
NOTE: After selecting a new mode, the thermostat initiates a delay of up to 4 minutes to protect the heating and  
cooling equipment.  
18 –  
href="
Optional Settings For  
Additional Thermostat Features  
The Model 8552 thermostat is equipped with 3 DIP switches located inside the thermostat on the  
printed circuit board. These switches are preset by the factory to typical home heating and air  
conditioning system requirements. The installing contractor also reviewed the settings during installation  
to be sure the thermostat will operate properly with your heating and air conditioning system.  
The DIP switches can however be changed to customize the thermostat ’s operation to your particular  
needs. This should only be done after consulting with your contractor.  
The Model 8552 DIP switches control the following functions:  
No. 1 – 4 min./2 min. Minimum Equipment On/Off Times. This switch is factory preset at 2 minutes.  
This switch provides short cycle protection for the furnace and air conditioning unit. If you feel  
that the furnace or air conditioning system turns on and off too many times per hour, ask your  
contractor about changing the switch to a 4 minute minimum on time. Keep in mind however that  
this may increase the overall temperature variation in the house due to longer run and off times.  
DO NOT change the position of this switch without first consulting with your contractor.  
19 –  
href="
No. 2 – Keypad Lock. If tampering with the thermostat is expected and unwanted, the keypad can be  
locked by moving this switch from the factory set OFF position to ON. This should not be done until  
all programming is finalized. In the locked position only the following functions can be done:  
The outdoor temperature button will display the outdoor temperature.  
The DECREASE button or INCREASE button will temporarily change the set  
point a maximum of plus or minus 3 degrees for a period of 1 hour, before the thermostat  
automatically returns to the original program.  
If the thermostat does not respond when a button is pushed it may be because the keypad has  
been locked. A Lock icon “  
“ will appear when a button other than OUTDOOR is pushed if the  
keypad has been locked.  
No. 3 – Fan with Heat Call. This switch was set by the installing contractor to operate the thermostat  
properly with your equipment. DO NOT change the position of this switch without consulting with  
the installing contractor.  
20 –  
href="
To change the DIP switch settings, the thermostat must be  
removed from the base w
The power to the thermos
before disassembling or t
permanently damaged. If
where the switch is that c
power to your thermostat,  
do not attempt to access  
the DIP switches. The  
following procedure must  
be carefully followed:  
Figure 1  
a) Turn off power to  
the thermostat.  
b) Completely open the  
thermostat cover.  
The cover will snap  
into this position.  
CAUTION: TO PREVENT DAMAGE, AVOID CONTACT  
WITH BLUE TEMPERATURE SENSOR ON BOTTOM RIGHT-  
HAND CORNER OF THERMOSTAT CIRCUIT BOARD.  
c) Carefully insert a medium-  
sized flathead screwdriver  
into the latch access slot  
(see Figure 1).  
21 –  
href="
Figure 2  
Figure 3  
d) Gently push in and pry up on the handle of the  
screwdriver until the lock tab disengages from the  
catch tab (you should feel or hear a click –  
see Figure 2).  
e) After the latch releases, grip the thermostat panel at  
the bottom corners and swing it up and away from  
the base to completely separate (See Figure 3).  
22 –  
href="
Once the thermostat panel has been opened and removed from the base, turn the thermostat over  
and locate the DIP switches found on the circuit board according to the following drawing:  
Be careful to change only the intended DIP switches per  
the explanation given at the beginning of this section.  
After the DIP switches have been set to the desired  
position, carefully reassemble the thermostat.  
a) Place the cover on the base by lining up the 2 round  
pegs on the bottom of the cover with the half circle  
cutouts on the top of the base.  
Note that the bottom of the  
cover when fully open  
slides in behind the top  
of the base. Swing the  
cover fully open. The  
cover will stay in place.  
23 –  
href="
Figure 4  
b) Align the hinge tabs on the base and  
thermostat panel. Swing the panel to the  
base and snap in place at bottom of  
thermostat panel (see Figure 4).  
c) Turn the thermostat power back on.  
CAUTION: TO PREVENT  
DAMAGE, AVOID CONTACT WITH BLUE  
TEMPERATURE SENSOR ON BOTTOM  
RIGHT-HAND CORNER OF THERMOSTAT  
CIRCUIT BOARD.  
24 –  
href="
In Case Of Power Failure  
The Model 8552 thermostat does not require a battery. If the power goes out the letters “AC appear on  
the display indicating power is not being supplied to the thermostat. “AC will remain on the display for  
up to approximately 30 minutes after the power goes out. During the period that the power is off, the  
heating/cooling system will not operate.  
This thermostat is equipped with a continuous memory feature which does not require any battery. The  
thermostat will never lose what has been programmed regardless of the length of the power outage.  
After a period of 30 minutes without power the clock will need to be reset. The clock will default to  
12:00 AM. Refer to the Programming Instructions to reset the clock.  
Cleaning  
If the surface of the thermostat becomes dirty it can be cleaned with plain water or many non-abrasive  
household cleaners, such as glass cleaner. When using any cleaner be careful not to get any into the  
interior of the thermostat. Do not spray any cleaner directly onto the thermostat. Spray the cleaner onto  
a soft cloth and wipe the surface of the thermostat.  
25 –  
href="
Limited Warranty  
®
Your Research Products Corporation Aprilaire Thermostat unit is expressly warranted for two (2) years from date of  
installation to be free from defects in materials and workmanship.  
Research Products Corporation ’s exclusive obligation under this warranty shall be to supply, without charge, a  
replacement for any thermostat which is found to be defective within a two (2) year period and which is returned, together  
with the date of installation, no later than thirty (30) days after said two (2) year period by you to either your original  
supplier or to Research Products Corporation, Madison, Wisconsin 53701.  
THIS WARRANTY SHALL NOT OBLIGATE RESEARCH PRODUCTS CORPORATION FOR ANY LABOR COSTS AND SHALL  
NOT APPLY TO DEFECTS IN WORKMANSHIP OR MATERIALS FURNISHED BY YOUR INSTALLER AS CONTRASTED TO  
DEFECTS IN THE THERMOSTAT ITSELF.  
IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE SHALL  
BE LIMITED IN DURATION TO THE AFORESAID TWO YEAR PERIOD. RESEARCH PRODUCTS CORPORATION’S  
LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES, OTHER THAN DAMAGES FOR PERSONAL INJURIES,  
RESULTING FROM ANY BREACH OF THE AFORESAID IMPLIED WARRANTIES OR THE ABOVE LIMITED WARRANTY IS  
EXPRESSLY EXCLUDED. THIS LIMITED WARRANTY IS VOID IF DEFECT(S) RESULT FROM FAILURE TO HAVE THIS  
THERMOSTAT INSTALLED BY A QUALIFIED HEATING AND AIR CONDITIONING CONTRACTOR. IF THE LIMITED  
WARRANTY IS VOID DUE TO FAILURE TO USE A QUALIFIED CONTRACTOR, ALL DISCLAIMERS OF IMPLIED  
WARRANTIES SHALL BE EFFECTIVE UPON INSTALLATION.  
Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or  
consequential damages, so the above exclusion or limitations may not apply to you.  
This warranty gives you specific legal rights and you may also have other rights which vary from state  
to state.  
26 –  
href="
NOTES  
27 –  
href="
NOTES  
28 –  
href="
NOTES  
29 –  
href="
®
The Aprilaire Total Indoor Air Comfort System is an integrated group of air quality enhancem ent  
products designed to work with your heating and cooling system to m ake your hom e m ore com fortable.  
For the best in indoor air quality, ask your heating and cooling contractor about these fine  
Aprilaire products, or visit us at www.aprilaire.com for your Indoor Air Solutions.  
Autom atic Hum idifier  
The Best Cure For Dryness  
High Efficiency Air Cleaner  
Nobody Makes Clean Air Easier  
Fresh Air Exchanger  
®
®
Only The Freshest Homes Have April Air  
The world ’s first computer-equipped,  
completely automatic humidifier.  
The economical, trouble-free, high  
efficiency air cleaner for your home. supply of fresh air with energy-recovery.  
Your best value for a constant, controlled  
Zone Cont rol Syst em  
Custom Comfort Throughout Your Home  
Electronic Therm ostat  
Energy Efficiency Never Looked So Good  
®
The most reliable way to achieve temperature  
control in every area of your home.  
Ultra-thin, easy-to-use programmable or digital  
controls featuring pinpoint accuracy.  
P.O. BOX 1467 • MADISON, WI 53701-1467  
Products For Better Indoor Air Quality  
B2202106 REV. 11/99  
110-948